I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 RepliesI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
Another question where i think my logic is ok i'm just not sure on the syntax.
I'm trying to find a range of cells by a criteria and the copy that range to another part of the sheet, The finding the data is ok i think, its just the copying... SpecialCells
Private Sub GetMainClass()
Dim Class As Range
Dim Cell As Range
Dim Destination As Range
Dim Counter As Integer
'searches entire sheet
Set Class = Selection.SpecialCells(xlConstants, xlTextValues)
' Initial setting of the counter. first row for data is the integer
Counter = 20
'set up the destination range with a counter to increment the row so data doesn't overwrite
Set Destination = Range(Cells(B, Counter), Cells(I, Counter))
For Each Cell In Class
If Cell.Value = "Main" Then
Cell.EntireRow.Copy Destination
Counter = Counter + 1
End If
Next Cell
Application.CutCopyMode = False
End Sub
I'm using a macro for searching through ~200k rows of a column, finding all the occurrences of a string and copying them to another column.
This is the code (copied from somewhere some time ago, modified as needed) :
[Code] .....
It works great but it takes a little less than 20 seconds to complete the task.
And, since I have to search for multiple strings and the results need to be copied to different rows, I use multiple subs like this in a bigger macro.
The problem is that it got to the point where it takes 3 minutes to execute that bigger macro and I'm trying to find a way to speed things up.
What would the VBA code be to find the last row of data and have it copy range A2:E(last row)?
View 2 Replies View RelatedI want to save myself some time at work, that's why I want to create an automatic sheet in Excel using VBA. I need to create files with monthly reports of data.
My project looks like this:
1. Gather information from user (Month & Year)
2. Create a file which name is based on Month & Year
3. Select data sheet
4. Find date range to copy (RowBegin, RowEnd)
5. Copy nad Paste required data into new file (point 2.)
6. Delete rows, formated in certain way
7. Find bottom of all columns and insert row with all formulas
8. Format all sheet acording to requirements
I was looking over MrExcel.com and I know how to do all the points besides point -> 4. Find date range to copy (RowBegin, RowEnd)
I got a column "D" with about 5000 cells for now and the sheet is updated daily. In those cells I got dates formatted like this:
D
4012 14/02/2006
4013 21/02/2006
4014 15/03/2006
4015 15/03/2006
4016 17/03/2006
4017 07/04/2006
4018 07/04/2006
4019 20/04/2006
What I don’t know is how get in VBA two variables – range of row numbers describing selected month (for example March) - from (RowBegin) & to (RowEnd), in this case RowBegin=4014 and RowEnd=4016, which I can later put into:
RowSub = RowEnd - RowBegin
Range("A”&RowBegin&”:A”&RowEnd).Copy Sheets("March").Range("A1:A”&RowSub)
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
Hopefully someone can help me and understand what I am trying to do. I'm almost finished my project and stuck on one last part! If I have missed a similiar example on the forum could someone point me to it
I have a list of Lines (a,b...) which start at point i and end at point j.
Line i j Point x y
a 1 2 1 6 10
b 2 3 2 7 4
3 2 3
I have have a seperate list of the points. Each i point and j point have x and y coordinates.
I want to find the i point value in my list of points and copy the following two columns (the x and y values) to Sheet2. On sheet2 I want to paste the i values in row 1 and the j values in row 2, skip two lines and move onto Line b.
I am having trouble with the Find method in Excel VBA.
This is the piece of code that I have written:
Sub NCMVariables()
Dim x As Integer
Dim c As Object
Sheets("Data").Select
With Worksheets("Data"). Range("A1:A60000")
Set c = .Find("USD", LookIn:=xlValues)
If Not c Is Nothing Then
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedBasically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
I have a list of values that are the following:
Column A: City Name
Column B: Distance to destination
Is there a command to find the minimum value in Column B and then copy the corresponding city name into a cell of my choosing.
Problem: Unable to retrieve last cell value in both columns A and B with the following formula.
Range("A2:B2").End(xlDown). Copy
Presently this only finds the last value in column A and copies that value.
Would like to know how to modify/change the range to look for the last cell in both columns A and B?
I am looking for a macro to do the below
copy range b2:b8 from sheet 2
find the first empty cell on sheet 1 row 2
paste values into there
I have a spreadsheet formed from a text file.
I want to search for each instance of "DOG" in column A, and copy the row below it and then paste that entire row to a new sheet called DOG. I can then autofilter and use a pivot table on the DOG sheet.
I cant just use an autofilter, because the row below can and sometimes does appear elsewhere in the spreadsheet, but refers to something else. It is all because this is an imported text file.
I have attached the spreadsheet to show you what I mean.....
here is the code I have so far, modified from another thread I posted.
Sub dogs()
Dim rd As Worksheet, dg As Worksheet, i As Long
Dim fRng As Range, Crit
Application. ScreenUpdating = False
Set rd = Sheets("Pets")
Set dg = Sheets("Dog")
The attached is a very cut down version of my spreadsheet...
What I have is a collection of about 500 .xls files that I want to import into a single worksheet in a new workbook, but I only want to bring in specific cells from the source sheets which are unfortunately not always in the same row numbers.
I have found this link on loops:
http://www.ozgrid.com/VBA/loop-through.htm
Which looks like it will do the work of digging through each workbook in a certain folder, but do I need to further specify a sheet within the workbook once it's opened in that loop code? Even if there's only one sheet in each source workbook? The sheets are named differently in each workbook, so that may be a problem.
Now the really complicated bit (I think) is the conditional stuff. Each source sheet is three columns (A, B and C) and I want to import the string (some will be numbers, some will be text) from the C column to a single row of the destination sheet, but only if the string in the source's B column matches what I'm looking for. There will actually be a few dozen of these conditional searches based on different strings from the B column, but if someone could just show me how to do it for a single string, I can expand that to all the other searches I need to do.
Let's say the search term is 'Application ID,' how do I look through the source worksheet for that string in column B and if I find it bring the string from column C on the same row into my destination sheet?
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
Look up a match on sheet1 from individual cells from sheet2, and if match copy and paste to sheet3, and i need this to be done for every cell in sheet2. Sort of a CTRL-F type of deal but for about 3000 individual cells on sheet2. The sheet1 contains about 10 columms with about 10000 cells all together. so to do this individually its just not posible.
View 5 Replies View RelatedI have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm