I have named cells. Rw1, Clm1 and Blk1
I have the numbers 1 through 9 in cells A1:A9
I need to create formulas to find a certian number.
Example:
A2 would have the value 2
If $A$2(value 2) is in Rw1 or Clm1 or Blk1 then "" if not $A$2
Cell P14 = 4.7
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
how do you find the number of rows and columns of an array?
View 4 Replies View RelatedI'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
View 9 Replies View RelatedI have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
Here's how the sheet is set up- row 6 is a header row with four repeating column heads- year, value1, value2, value3. So year is in col A, E, I, M, Q, etc. up to FM. Value3, the one that I want totaled is in col D, H, L, P, etc up to FP. Each year column begins with a different year, (with some repeats) but each is 141 rows long, so that the first study begins in 1994 and ends in 2134, the second is from 1985-2125, the third is from 1991-2131, etc. I want excel to find all the value3's from 2007 and total them, all the value3's from 2008 and total those, up through 2145. The data range is A7:FP147. I tried adjusting some of the suggestions, but no luck. I was thinking I'd have column FQ with all the years 2007 on, and FR by the total of all the value3's from that year.
I'd like to search for a specific value like (1) in an array of cells like (A:A). The result needs to be the average number of a different column (B:B) in the same row as the searched value (1). And the resulting number should be rounded up to the nearest 10.
Example below: (Find value = 1 in A:A) ... 1 is found 4 times.
A | B
1 | 295
3 | 123
1 | 400
5 | 425
1 | 354
1 | 400
In the example above there are 4 (1's) found. By adding all the values in column (B) of the same row, we get 295+400+354+400 = 1449, dividing that in 4, the average is 362.25, rounding that up to the nearest 10... THE RESULT I'M LOOKING FOR IS: 370
I I have a excel document which has a sheet containing a large number of array formulas.
I turned the automatic calculation off.
However, even when I press F9 to calculate the cells it just crunches, gets stuck at “Calculating 0%” and then crashes.
The majority of the array formulas are IF queries with multiple criteria.
Would it speed up the calculation if I didn’t use array formulas?
I got the following loop that is very slow. The main way (I think) to speed it up is to avoid looking at all the 65000 cells. The columns used in the calculations have data varying from a few hundred cells up to (rarely) dozens of thousands. I assume it would be better if I could replace the 65500 with something indicating the "end" of the data in the column. Also, is there another way to do this process without using a loop?
I am trying to fill in a number of rows with array formula's in the adjucent cells. I use the loop because the number of rows depends on a selection of another parameter which sets the row number before calling the loop.
I am trying to find number of cells in a range.
I tried:
=COUNTIF(U97:U103,AND(">"&5,"<"&8))
and assumed it will count the 6 and 7's.
It always results with 0.
I use my spreadsheet to keep score during tournaments. when i calculate my leaderboard at the end of the event i list the results first place all the way down until it finishes the list of players. i need to be able find players with the same or equal score and list them as tied for the same place.
another words if i get to the 3rd place and i had 3 players tie for third i need my leaderboard to show them all in 3rd place . currently it would number then 345. i listed below how it should format it. i also attached a file it will make it more clear.
We are trying to track the average star values of reviews posted to our clients accounts. Here is an example of the spreadsheet we have set up:
Company Name
Review 1
Review 2
Review 3
Review 4
Review 5
Company 1
[CTY] 4 Stars review content
[ISP] 5 stars review content
[GGL] 4 stars review content
[CTY] 3 stars review content
[YELP]5stars review content
In this example, we use the initial [ ] to track which site the review was posted on ex: [CTY] means city search, [GGL] means google, etc.
We want to be able to track the average star value on each site. So the formula for City Search would scroll across the row of reviews, pick out reviews 1 and 4 and then find the first number in each and average them. The result in this case would be 3.5
From the research we have done so far, this looks like it will require a complex array formula. How to make this formula? Is this even possible what we are trying to do?
I have this formula in columns C:D and G:F -
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(ISERROR(MATCH(A1494,Jan07!A:A,0)),"",INDEX(Jan07!A:B,MATCH(A1494,Jan07!A:A,0),2))
Some of the cells end up with nothing in them. Columns E and H are the differenced of C & D and G & F respectfully. The problem is that some of the cells in E and H state #VALUE! because there isn't any data in the other columns (C2 is blank, D2 is 24, E2 is #VALUE!). If I update C2 with 0 then I receive the correct answer in E2 of -24.
I want to have a macro auto fill all blank cells (even though there is the formula in them there isn't data) with a "0". I am using the below code and it is Compile error: Type mismatch at the "True" part of the code.
Sub FindEmptyCellAutoFill()
Dim rFound As Range
With ActiveSheet.Range("C:D", "F:G")
Do
Set rFound = . Find(What:=" ", LookIn:=xlValues)
If rFound Is True Then AutoFillValue "0"
If rFound Is False Then Exit Do
Loop
End With
End Sub
I'm looking for another excel game changer (for the work I do anyway).
I have a dollar amount, and I want to know if any combination of dollar amounts in a particular range of cells will equal that dollar amount. Is this possible in Excel?
Example: I have 20 different dollar amounts in a column. I want to know what combination of those 20 different dollar amounts, if any, will equal $257.97. The dollar amount I'm looking for and the numbers in the range will change with each use. I'm hoping for a formula, but VBA will work too as I could just make a template and copy / paste the numbers in.
I need to find the cells that are greater than 48 and then find the average of this number.
Is there a formula that could put this together?
Average if greater than 48.xlsx
I'm trying to use the .Find and .FindNext functions to find how many cells in Worksheet("WAS") have the same value as the ActiveCell (B3 in this case) on the Worksheet("DDS"). Basically i'm just trying to figure out how many times this sub goes through the Do While loop. However, "tick" keeps coming back as a value of 1. I know there's something I must be doing wrong or something i'm not allowed to do but i'm still pretty new at this.
View 2 Replies View RelatedIm trying to pull together a formula to achieve the below. What i have is a spreadsheet to be used by staff in different countries so im looking to make it easy to modify the categories used without the user needing to do anything complex with formulas.
The right hand side of my file (C:E) shows a code for each year we have covered a country with the year as a prefix (2014 - Blah). The left (A:B) is a summary showing the latest year we covered that country.
Current formula:
{=IF(COUNTA(C2:D2)<=0,"","âś”-"&MAX(LEFT(C2:D2&"0",4)*1))}
The current formula works fine if you set the columns to where the data actually is but for ease of use i need it to look at the data in rows 1:2 and match up the Continent/Country and then MAX the dates.
How to find out the number of cells in a range containing dates less than a specified date.
View 4 Replies View RelatedI want to find the total number of times the number 1 appears in cells B2 to B33.
In each cell I have codes such as 4919409382a, 5021193035v and so on.
I have tried =COUNTIF(B2:B33,"1") but just get 0 returned.
(1) I want to find the maximun number for the past n periods in a range of cells, but I want to be able to vary n by changing the number of periods in one cell at the top of the sheet, i.e. if i enter 10 in cell A1 the function will return the max number for 10 periods over a certein range, if I change the figure to 20, then the max number for 20 periods will be returned!
(2) I have a column (lets say column c) which will return a number of values if my criteria are met and 0 if not, I want a function in another column which will replace the 0 with the next non 0 figure in column c, the gaps between the non 0 figures can vary. I feel it involves looping in some form, and writing a new function, but I am not sure.
i m given 12 max value of my 292 cells. now im asked to find number of cells that falls within each of these max values?? im asked t use histogram. how will i do it?
View 3 Replies View RelatedAssume that I have in Sheet2 a list of CUSTOMIZED name.
[Code].....
Now in Sheet1, I have data in column A that has strings consist of the customized name.
For example
[Code] .....
What function should I use that could give me the result of the CUSTOMIZED name?
I was thinking of a formula i.e.
[Code] ......
Obviously, the above formula give me error. Even if it works, it'll not give me the customized name ...
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies View Related I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
I have a sheet (Lookups) of names like the following.
AA
BB
CC
I have another sheet (Values) where they could have the following variations.
AA 2
AA 3
AA3
BB12
BB2
etc..
What I want to do is write a formula where it looks at Lookups and returns that value if it finds it.
So AA 2 will return AA
AA 3 will return AA
BB12 will return BB
etc.
I am using IFERROR(LOOKUP(2^15,FIND(LOOKUPS!Range,VALUES!Cell),VALUES!Cell) and it returns either 1 or the Values!cell when it doesn't find it. What I need to find out is how to grab the position in my lookup rangte?
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
I have a list of codes which I want to swap into more meaningful names. For instance, say
A32
G43
R54
I want to do a find replace to turn these into
Potatoes
Carrots
Onions
Is it possible to have these written into a single piece of code ? Or, do I need to have separate pieces of code for each Find/Replace ?
I need to find out how to create an array from multiple sheets and find the last sheet in the array. I've looked all over online, and can only find how to create an array of cells. Specifically, I need a loop to place each sheet in the array based on the value of a cell in the sheet (A1), and then with the last sheet, give the value of another cell (B1).
View 14 Replies View RelatedI have this formula: (an array formula)
=MIN(IF(cover!C$10:C$1047=C4,IF(cover!T$10:T$1047=A4,cover!F$10:F$1047)))
It does the trick to give me the minumum value in column F, based on the constraints in columns C and T.
What I need is the formula to return the Value in Column Q based on these same constraints. So, once the formula finds the minumum value in Column F, it should return whatever is in column Q.
Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)
I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.
Cell
A1 Number >2000300040005000600070008000900010000
70 2864295717148571000114312861429
84 24236148059971883795610751194
[Code].....