Fill In A Number Of Rows With Array Formula's In The Adjucent Cells
May 15, 2009
I got the following loop that is very slow. The main way (I think) to speed it up is to avoid looking at all the 65000 cells. The columns used in the calculations have data varying from a few hundred cells up to (rarely) dozens of thousands. I assume it would be better if I could replace the 65500 with something indicating the "end" of the data in the column. Also, is there another way to do this process without using a loop?
I am trying to fill in a number of rows with array formula's in the adjucent cells. I use the loop because the number of rows depends on a selection of another parameter which sets the row number before calling the loop.
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I am wondering if I could have a formula be used against a certain row/cell containing a certain "phrase" or "number" for instance
I want E1 to read something like this = (row containing item "FF32105") (the given row from the previous statement) ( the input column ex. B) (the input value ex. *6)
Essential I want to be able to copy and past a sales forecast and have the formulas automatically (listed below the pasted forecast) calculate purchase needs. The issue is that if our forecast one month has a certain item and then the next does not then they will end up on different lines after the copy/paste. We have over 500 items so a manual adjustment would be time consuming..
Is there a possible way for the formulas to "find" the correct line to start calculating data?
I have a macro that selects a range of about 20 columns and fills down. It works fine on my smaller set of data, but when I use one that has about 40,000 rows I get the error:
FillDown Method of Range Class Failed
It fills down about 7,000 rows, then fillsdown the first cell of the next row, but leaves the others blank. The entire range (including the nonfilled cells) is still selected.
dear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5 L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5 L3 cell =130*1.5 L4 cell =130*1.5 L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
I have a set of data in column R, with an unknown number of rows that looks like this
Days Late -28 150 3 16 41 . . .
and I have written a script to add an adjacent column "S". I want to fill column S with conditional values based on the value of column R, sorted into categories such as "On Time", "Less than One Month Late", etc. Here is what I have so far, it doesn't work:
My merged cells are not purely aesthetical - each merged cell (covering 6 rows in total, beginning at A3:A8) has colums and rows to the right for other details/formulae relating to that specific merged cell (which contains a customer account name).
The list I'm trying to reference is on a seperate tab - 'Projects' starting in cell A4. This list will have project names added to it, so I need my merged cells to reference the list, and subsequently pulling through all new additions to the list, rather than having to add them on a 2nd time.
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty 2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc. but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example. Series [b]Start Range End Range Qty 1 1 1 1 3 3 3 1 5 5 7 3 6 7
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
Suppose in cell A1 I type in the number "100" and in A2 I type in the number "5" What I want to do: Have the number "100" repeat 5 times in a vertical list (so 100 appears in B1, B2, B3, B4, B5)
in the first row i want to use the fill handle at 135 and drag rightwards so as to copy/retain the pattern (decrementing by 5, from multiplier 150 until 100)
how would I achieve that?
p.s I also want the formula for columns to work with the fill handle drag downwards.
I am trying to create a nice equation that will look in row 35 for the highest value and then return the value that is 33 rows up and 1 column to the left. See attachment of for more details.
Basically, I need a formula to fill in cells B38:B41 (detail included in Excel doc attached).
I am kind of new to Excel programming and would like to know if there is a solution to my problem. What I need is to have a dropdown list (I know how to make this) then select an item from the drop down, then based on the name i select, Excel automatically fill up the rest of the cells.
For example, from the drop down list I select the company name then Excel automatically type the address, phone number, Fax number and the contact name of the company for me in corresponding cells. Is there a way to do this?
I have an array formula that I want to apply to all the cells in a column with the exception of the = variable. Haven't been able to do anything but get it in the same relation ie.
{=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C7,'CO Angler Data'!R7:R106,0))} becomes {=SUM(IF('CO Angler Data'!K39:K138='CO Am Data'!C39,'CO Angler Data'!R39:R138,0))} in column 39 when I want it to be {=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C39,'CO Angler Data'!R7:R106,0))}.
Can I do this easily or do I have to do it manually like I have been?
the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I wanted to do a multiple return vlookup so I used an Index formula. I have account names and am trying to vlookup contacts associated with those accounts (4 max). So I have a list of Accounts all with 3 blank rows in between them.
How do I loop an array formula? So far I have the code..
[Code] .....
This finds the 4 contacts associated with the first account in C5 which I named the cell "myVar". I now want it to find the contacts associated with the accounts in C9, C13, C17 and so on until the first empty cell.
I'm having difficulty creating an array formula. In a multi-column sheet, I am looking at a column with classes and a column with a date (in the format 7-Oct-09). I need to list the number of a specific class for a particular month (any day). I have tried the following which gives only the number of classes: =COUNTIF(A4:A2500,"AA")+COUNTIF(H4:H2500,"10/??/09") and =SUM((A4:A2500="AA")*(H4:H2500="??-Oct-??")) which gives me 0. Maybe an array formula is not the way to do this.
I am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
I have a formula in cell A1 that I need to drag downwards so that it fills cells A2 to A10. That formula is picking up the figures located in another sheet but the figures on that sheet are arranged horizontally (A1 to J1). Is there a formula to perform this action? I've tried playing around with the $ sign in my formulas but it does not work.
If I have an assortment of odd and even values in range a1:j100, using the Array formula {=If(Mod(a1:j100,2),"",a1:j100)} will clear out all the odds, leaving the evens.
Is there a way I can add to this formula to color the qualifying cells (odds in this instance)? I know Conditional formatting is perfectly suited for the job but I am looking for a departure from this.
