I have a workbook which uses a Worksheet named MainSheet. Data is stored in Cols A to AE starting at Row 6 to last entry (Records are added daily)
A date field ( DD/MM/YYYY), is in Col H (Installation Date).
I need a macro which look at the DATE field in the MainSheet and COPY ONLY records that are 2 DAYS greater than TODAYS date.Into a worksheet
named RemindDate.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I have a list of names and i am using a vlook up formula. The problem i fall into is that it will only find the first Jon. How can i get it to find all of the Jon's and get all of the data?
example
Name Size Lan
a1 b2 b3
Jon 5 9
Jara 6 7
Fish 7 6
Jon 9 5
how can i get all of this info ifi nees the 2nd jons information
how to make the << and >> buttons as well as the find button work on this form. Here is the code for the >> (next Record) button. I think if I can understand how one of them is supposed to work I can do the rest. I have been trying for days to figure it out, and even with RoyUK's help I still can not get it to work....
View 9 Replies View RelatedI've taken some time to learn about building an excel data entry form. I'm looking to add a find button.
1) users would type in something in the ID text box, then click on "find". The code will then try to find that record in the worksheet(just sheet1).
when it is found, i want the forms to auto-populate values from that row.
right now, the search works except when you are trying to search a value that that is NOT in the worksheet. I'm getting an error message that i've never seen before.
[Code] .....
form based input.xlsm
I have tried to copy and use code within this forum to run a macro when a cell value on a worksheet changes to a number 5. The macro that is called, should copy selected data and paste it to the next available cell in another worksheet in the same work book. The macro itself runs as soon as the cell value changes to a number 5 but it does not stop and keeps pasting the same information over and over.
I thought I was finally starting to get the hang of these macros but once again I was proven wrong. I've attached the workbook below. My goal is to have a user fill in the boxes on the entry sheet. Once all 6 yellow cells obtain data, for the macro to copy the data into sheet 3 at the next available blank cell, reset the yellow boxes and re run the next time all 6 yellow boxes obtain data.
I have a sheets called " Records" that contains a table with columns E to to AE, rows begining at E5. Each column is it's own attribute and the table in question will have records added to it in the future, so the search would need to include the possibility. What I am trying to do is search only a small range of those attribute columns for a particular text but I want to display all the attributes of the records that meet the search criteria (I hope that makes sense!) So far I have the below code (found on this forum previously), but it searches all attributes columns rather than just the ones I want to search, and I am willing to try something else completely different!
Public Sub search_flights()
Dim My_Result As Variant
Dim first_Result As Variant
Dim Flight_Number As Range
'clear search results
Worksheets("Search").Rows("11:" & Rows.Count).ClearContents
Set Flight_Number = Worksheets("Search").Range("C7")
'check data
If Trim(Flight_Number.Value) = "" Then
MsgBox "Please Enter a flight number in Cell C7"
Exit Sub
End If.....................
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double
n = Now()
sn = Str(n)
p = InStr(sn, ".")
first = Left(sn, (p - 1))
l = Len(sn)
d = l - p
S = Mid(sn, (p + 1), d)....................
I am developing a charge rate calculator which allow me to select job, level and input the base pay rate, it will calculate the charge rate to client. What I need is once every thing is done, by clicking the Confirm button (form control) in Charge Rate calculator sheet, it will automatically copy and paste the job title, all charge rate into the Summary sheet as in the attached. And the user select another job title, and click confirm again, it will add to the next record in the summary sheet. It will keep adding until the "clear button" is click, which will clear all record in the summary sheet.
View 7 Replies View RelatedI have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province
Port_Of_Load
Port_Of_Discharge
BK_Client_Name
FF_BK_Name
VesselVoyage
GrossWeight
Export_Closing_Date_Yard................
a macro or code to copy row B10 To another sheet as a record but paste it down a row as i keep overwriting previous paste, tried offset etc but still stuck. I HAVE THIS SAME PROBLEM ON 2 SPREADSHEETS NOW. All i need it to clone the top row everytime data is put there, but where the data goes to paste it down a row so creating a record. Also i need another macro to search the G10 cell of the same row for the word replace and if so copy that row to another sheet as well.
View 9 Replies View RelatedI have the day of the week in B1 Emp Nbr in B2 Hours worked on B11
What I need a macro to do is match B1(day of the week) with the corresponding offset column in F1-R1, Pos and Post the Emp NBR(b2) and Hours(b12) in the corresponding column (F4 and G4)
I then will key in a new Emp and the hours and click the macro to execute the move over to the correct column and down one row.
Do this until I post Emp 999 at which time it will exit the macroOzgrid weekly hours.xlsx
The next day I will change the day in B1 to 2, corresponding to TUE, and it will move over to the correct column (H4 and I4) and post the daily data until I key in EMP 999
Then continue for the rest of the week.
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
I am creating an asset management sheet. For the formula I am trying to work out there uses 3 fields : ID, start date, and end date.
What I want to do is be able to show if the ID is duplicated within another record with an overlapping date. So an item is flagged if it is in the list within the same dates as another record. I tried a few countif formulas but with no success.. I may just be approaching the problem incorrectly though.
I'm trying to find a macro that will run allowing the user to select a 'starting record number' and a 'finishing record number' when printing.
I have a spreadsheet that feeds from a master list in excel, from over 5000 records.
I need to print the s'sheet with any given indivdual record's information at any given time.
Individual prints are fine. However if I wanted to print from record number 1500 to record number 3000 it would take me all day.
Is there a way I can set up a macro so an option form pops up? allowing selection of "From record" and "to Record" ?
Im trying to record a macro that will enter a formula in a cell each time I run the macro
Drop the Lowest2:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10)
Drop Lowest1:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10)
I know I can write the formula in a simpler way, but I was asked to make it like this.
The problem is that when I enter the formula in the cell while recording. I got a message: "Unable to record" so this part can't be recorded
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I have 8000 data in a column.
For example.
red shoes
tennis shoes
running shoes
tennis balls
running shorts
I want to find & copy the sentences say:
1.With word shoes
2.With word running
3.With words tennis
Can some one help? I need a macro that will find the last value and copy the all rows from that value back to row A.
At present, because I have a formula in the cells my macro goes to the last row this has been entered into.
I have an excel userform with a textbox (TextBox1). A number can be put into this textbox and when the button next to the textbox is clicked, the script should lookup the number in the textbox in column A of sheet1 and return the values of column B, C and D on that particular sheet in the form of a messagebox.
View 7 Replies View RelatedI am trying to create a macro that copies the values from A2 to the last row of data on sheet1 and past them to cell B2 on sheet2
View 2 Replies View RelatedI have a spreadsheet with 20 sheets, with each sheet representing work done by an individual. The sheet would contain all the tasks and the percentage of work alotted. I now need to capture all these in a summary spreadsheet BUT only if the task is "IN PROGRESS" which is indicated in one of the cells.
Currently, we're doing it manually and it is a pain to go through all the names and copying the rows one by one. The summary should show the names with the corresponding project name and allocated time (copy whole row).
I'm trying to come up with a macro which will go through column A once searching for a value (ex. "apple") and upon finding a cell with that value, take cells 79-100 from that row, copy them to cells 82-103 of the next row, and delete the row which contains the value.
I believe the functions I need to use are:
I would like to call up a find box, then be able to search several worksheets for a string, to copy and paste the related row to a new worksheet.
I've gotten as far as being able to search for a string and get the row pasted, as long as the string is defined in my macro. Is there a way though to be able to call up a find box first though, and search for the input variable? (alternatively, I can only imagine a separate piece of code for each variable, of which there are many, and I am actually trying to save time.
I would like to go through an Excel s/s Sheet1 look for rows where first Cell is "A" and then copy whole row in Sheet2.
Let's suppose there are 4 rows as follows:
A 1
B 2
A 3
C 4
I would like to copy first and third row into Sheet2
VLOOKUP find the first value , and copy the whole the field that you wan. What if I want the VLOOKUP the entire column and sum up all qty of the search criteria, how to modify the formula?
=VLOOKUP(A2,[Book2.xls]Sheet1!$A:$B,2,0)
Book1.xls
Book2.xls
I have the following code. It runs fine and I get the popup msg at the end but it doesn't do what I need.
Range w2 is a date. I want the macro to search for this date in Sheet2 just in Column B and when found copy everything on the row it is found down to the end of the worksheet whatever row that might be and then go to sheet1 and paste this below the last used row!
Code:
Sub test222()
Dim FindWord As String, Found As Range
Dim wsDest As Worksheet, ws As Worksheet, wb As Workbook
Dim Nextrow As Long, Lastrow As Long
Set ws = ThisWorkbook.Sheets("Sheet2")
[Code] ........
I have a web query which updates regulaly, however, a lot of information is prodcued which i dont need or want. I know that the information I do want will always be in a single column, usually A or C.
The problem is further complicated. If I have the following search list on sheet1 column A:
Search List (sheet1) Web Query results (Sheet2) Known bad data (sheet1)
A AB AB
B E DE
C F
D A
E B
F C
G DE
I need to be able to search through the information returned by the web-query, and find the first exact match in the returned data that exists in the lsearch ist, so in the above table the first exact match would be row 2 which contains only an E. Row 1 with AB is not a match as it does not exist in the search list.
So, having identfied where the first entry I am interested in (E) is, we need to copy all the cells below it until we find the first entry which then exists as an exact match in Known bad data column.
If all goes to plan, running the macro on the above data would output the following to sheet 1:
E
F
A
B
C
