The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I've attached a workbook which contains two sheets: PAYM DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
1) I need to add an edit check 2) have a copy of Active Workbook Path stamped onto spreadsheet with date and time to create a visual record of where the file has been saved (described after the code below).
1) I need to verify that two cells (S7 and S9) are not blank before running my code below (=IF(OR(S7<>"",S9<>""),RUN CODE,"You must select your Provider or Division before you can save this document")).
- If both of these cells are blank a message box should notify the user that they must select the provider and/or division before they can continue with the save.
- If one or more of these cells are not blank the code below should run.
I have a list of data by daily date only for days when the market is open. I need to select the data for each Friday (if the market was not open that Friday then I need to take the Thursday’s data) and copy that data into new cells thereby creating a set of weekly data. The daily data is in columns A to F and in rows 2 to 1400. The Friday data of each week is to be copied to columns G to L and to rows 2 to 300. I need to have the data without row gaps as I use this data subsequently.
I have attached a sheet with some daily data. I have manually copied a sample of Friday data to the desired location in red to show the solution I am looking for. An additional problem is that I need to copy across a daily moving average, from column F to column L, and being a calculation from daily data it does not copy and paste.
I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles 'blah blah blah get filenames 'filename of new workbook = outputFileName 'worksheet name in new workbook = Cumulative Record Data 'filename of data workbook = dataFileName 'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
I am building a Macro which can be found underneath. The red code is not working right now and I am looking for alternatives to solve this error but until now I haven't found none.
Basically, I am looking for a correct code to copy files from a sheet to another sheet with a find macro.
Sub vinden() Dim FindString As String Dim Rng As Range FindString = Range("A21") If Trim(FindString) <> "" Then With Sheets("Voorraadverloop").Range("A1:IV65536")
I want to save myself some time at work, that's why I want to create an automatic sheet in Excel using VBA. I need to create files with monthly reports of data.
My project looks like this: 1. Gather information from user (Month & Year) 2. Create a file which name is based on Month & Year 3. Select data sheet 4. Find date range to copy (RowBegin, RowEnd) 5. Copy nad Paste required data into new file (point 2.) 6. Delete rows, formated in certain way 7. Find bottom of all columns and insert row with all formulas 8. Format all sheet acording to requirements
I was looking over MrExcel.com and I know how to do all the points besides point -> 4. Find date range to copy (RowBegin, RowEnd)
I got a column "D" with about 5000 cells for now and the sheet is updated daily. In those cells I got dates formatted like this:
What I don’t know is how get in VBA two variables – range of row numbers describing selected month (for example March) - from (RowBegin) & to (RowEnd), in this case RowBegin=4014 and RowEnd=4016, which I can later put into:
I work for a chicken hatchery. So, a couple preliminary things by way of explanation:
1. The day we place our eggs in the incubators, we fill in an excel file containing a list of all the farms from which those eggs came. This is called the "Egg List" workbook.
2. After 21 days have passed, and the eggs have turned into chicks, we open that original file. We copy cells from one column of that file (the workbook is called the “Egg List”, we copy “Sheet1” cells B7:B50), and paste them into another Workbook called “Chick List.”
My question is this:
Is there a macro I can put into the “Chick List” workbook that will automatically locate that particular “Egg list” workbook file that is 21 days old, and paste the contents of its cells B7:B50 into cells A7:A50 in my “Chick List” Workbook. It is preferable if this can be done without opening the old “Egg list” file. But if this is not possible, I’ll take whatever I can get.
Here is what I have, which works okay as far as finding the file. I bootlegged this from another part of this helpful website. But I cannot figure out the syntax for getting cells B7:B50 from the Egg list to copy into cells A7:A50 of the Chick List.
Dim FSO As Object
Sub ProcessFiles() Dim i As Long Dim sFolder As String Dim fldr As Object Dim Folder As Object Dim file As Object Dim Files As Object Dim this As Workbook Dim cnt As Long Dim filenew As Object
I have a macro that searches a column for a date and then selects the appropriate date. The next step is to then copy the row and insert a new one below the copied one and paste only the formulas and none of the data. I have tried several iterations but all of the seem to paste the data too.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
See attached spreadsheet for reference : MacroHelp.xlsx‎
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall() Dim y As Long Dim starta As String Dim tr As Long, tc As Long Dim sr As Long, sc As Long Dim s As Worksheet, t As Worksheet Dim SourceCell As Range 'Setup Application. ScreenUpdating = False Set t = Sheets("Target Sheet") Set s = Sheets("Search sheet") Set SourceCell = ActiveCell Do While IsEmpty(ActiveCell) = False Counter = 1 'Get last used row in Target Sheet t.Select..........................
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100") Dim FoundRange As Range Worksheets("Data input").Activate
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace() ' ' Macro2 created by david '
' for the entire sheet, moving from one cell to the next down the column, changing rows ' search for the contents in another sheet, and then if that is found, ' copy the row number to a variable, and then ' copy column K from sheet 1 to column N of sheet 2, using the same variable above ' after that same, but L goes to P. ' ' Windows("file1.xls").Activate Rng = Selection.Rows.Count Dim toFind As String ActiveCell.Offset(0, 0).Select Application. ScreenUpdating = False Dim i As Integer For i = 1 To Rng Windows("file1.xls").Activate toFind = Range("A + i") Windows("file2.xls").Activate
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
I have an excel file that I use to track all my financial investments. The file is already set up with a query to retrieve stock prices when I refresh the document.
I would like to be able to open up the document, and store the closing price of the stock(s) with a date in the next column over. With this information I can graph weekly, monthly annually, or any time period I want.
I have been searching for a couple of hours now, and I could not find anything similar to this. I would think this is a pretty common idea for many people tracking their investments with Excel, so if it has been covered perhaps someone can point me in the right direction.
I don't have any programming experience in excel so as detailed of an explanation as possible
i wanna to put check boxes in colums d4:d41 with a formula inside which beginning with this formula (=Sheet1!$D$4) in cell d4.how to copy and drag down this formula into d5:d41?
I have a macro to copy/paste B14 to B14 in next months workbook. Once a year the event occurs twice in a month, resulting in B14 and B15 both having values, the other 11 months B15 is blank. For this one month I need to copy/paste B15 to B14 in next months workbook. The macro is quite long. So it is If B15 has value then copy/paste B15 to B14 in Feb workbook, otherwise copy/paste B14 to B14 in Feb workbook. Unable to work it out myself.
I have a command button that copies a template worksheet and names it with a date that the user chooses. Problem is, the user can choose the same date more than once. So, I need to have the command button check for all the sheet names, and if it finds a duplicate, prompt the user to enter some text to concatenate to the original sheet name, therefore making it's name unique. My existing code is as follows:
Private Sub CommandButton1_Click()
MsgBox "Please be patient. Creating a new Week Ending sheet can take several minutes!"
What I have is a table of employees names, which site they work at and a comment.
I have a table on another sheet with the addresses of all our sites.
What I need is a macro which will: >look at the active selection >copy their name(sheet 1, row B) & comment (sheet 1, row G) >look up the site they work at (sheet 1, row D) >copy the relevant address (sheet 3) >paste the name and addresses into different sheet >paste the comments into another sheet
This will be used to make printable labels for letters that we post out to employees. They will need to be split up so each name and address is printed on a different label.
The comments will be printed onto letters which will have a headers which is the same for everyone, but would be nice if they could be personalised with the comments of their managers and perhaps their names (something like "Hi John, you have been selected by your manager for your great work, please find enclosed your badge. Jeff's comments: "Comment 1""). But this part is a nice extra, the important part is the address labels.
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
