Copy Each Record Attributed To Found Value
Apr 29, 2008
I have a sheets called " Records" that contains a table with columns E to to AE, rows begining at E5. Each column is it's own attribute and the table in question will have records added to it in the future, so the search would need to include the possibility. What I am trying to do is search only a small range of those attribute columns for a particular text but I want to display all the attributes of the records that meet the search criteria (I hope that makes sense!) So far I have the below code (found on this forum previously), but it searches all attributes columns rather than just the ones I want to search, and I am willing to try something else completely different!
Public Sub search_flights()
Dim My_Result As Variant
Dim first_Result As Variant
Dim Flight_Number As Range
'clear search results
Worksheets("Search").Rows("11:" & Rows.Count).ClearContents
Set Flight_Number = Worksheets("Search").Range("C7")
'check data
If Trim(Flight_Number.Value) = "" Then
MsgBox "Please Enter a flight number in Cell C7"
Exit Sub
End If.....................
View 5 Replies
ADVERTISEMENT
Jun 19, 2014
The below code works fine except when there is no recorset found then i want to display 0 in the cell but its not doing it. The code just leaves it blank if no recordset found.
[Code].....
View 3 Replies
View Related
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
Oct 2, 2007
I have tried to copy and use code within this forum to run a macro when a cell value on a worksheet changes to a number 5. The macro that is called, should copy selected data and paste it to the next available cell in another worksheet in the same work book. The macro itself runs as soon as the cell value changes to a number 5 but it does not stop and keeps pasting the same information over and over.
I thought I was finally starting to get the hang of these macros but once again I was proven wrong. I've attached the workbook below. My goal is to have a user fill in the boxes on the entry sheet. Once all 6 yellow cells obtain data, for the macro to copy the data into sheet 3 at the next available blank cell, reset the yellow boxes and re run the next time all 6 yellow boxes obtain data.
View 2 Replies
View Related
May 31, 2007
I have a workbook which uses a Worksheet named MainSheet. Data is stored in Cols A to AE starting at Row 6 to last entry (Records are added daily)
A date field ( DD/MM/YYYY), is in Col H (Installation Date).
I need a macro which look at the DATE field in the MainSheet and COPY ONLY records that are 2 DAYS greater than TODAYS date.Into a worksheet
named RemindDate.
View 9 Replies
View Related
May 25, 2007
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double
n = Now()
sn = Str(n)
p = InStr(sn, ".")
first = Left(sn, (p - 1))
l = Len(sn)
d = l - p
S = Mid(sn, (p + 1), d)....................
View 2 Replies
View Related
May 27, 2014
I am developing a charge rate calculator which allow me to select job, level and input the base pay rate, it will calculate the charge rate to client. What I need is once every thing is done, by clicking the Confirm button (form control) in Charge Rate calculator sheet, it will automatically copy and paste the job title, all charge rate into the Summary sheet as in the attached. And the user select another job title, and click confirm again, it will add to the next record in the summary sheet. It will keep adding until the "clear button" is click, which will clear all record in the summary sheet.
View 7 Replies
View Related
Jan 11, 2010
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province
Port_Of_Load
Port_Of_Discharge
BK_Client_Name
FF_BK_Name
VesselVoyage
GrossWeight
Export_Closing_Date_Yard................
View 4 Replies
View Related
Nov 3, 2009
a macro or code to copy row B10 To another sheet as a record but paste it down a row as i keep overwriting previous paste, tried offset etc but still stuck. I HAVE THIS SAME PROBLEM ON 2 SPREADSHEETS NOW. All i need it to clone the top row everytime data is put there, but where the data goes to paste it down a row so creating a record. Also i need another macro to search the G10 cell of the same row for the word replace and if so copy that row to another sheet as well.
View 9 Replies
View Related
Aug 18, 2012
I have the day of the week in B1 Emp Nbr in B2 Hours worked on B11
What I need a macro to do is match B1(day of the week) with the corresponding offset column in F1-R1, Pos and Post the Emp NBR(b2) and Hours(b12) in the corresponding column (F4 and G4)
I then will key in a new Emp and the hours and click the macro to execute the move over to the correct column and down one row.
Do this until I post Emp 999 at which time it will exit the macroOzgrid weekly hours.xlsx
The next day I will change the day in B1 to 2, corresponding to TUE, and it will move over to the correct column (H4 and I4) and post the daily data until I key in EMP 999
Then continue for the rest of the week.
View 3 Replies
View Related
Feb 23, 2010
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
View 5 Replies
View Related
Mar 16, 2014
I am creating an asset management sheet. For the formula I am trying to work out there uses 3 fields : ID, start date, and end date.
What I want to do is be able to show if the ID is duplicated within another record with an overlapping date. So an item is flagged if it is in the list within the same dates as another record. I tried a few countif formulas but with no success.. I may just be approaching the problem incorrectly though.
View 1 Replies
View Related
Aug 3, 2009
I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.
For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search
For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do
Rng.Copy NewSh.range("d1000000").End(xlUp).Offset(1,0)
Set Rng = .FindNext(Rng)
Loop While Not Rng Is Nothing And Rng.Address FirstAddress
End If
Next I
End With
Next sh
View 9 Replies
View Related
Nov 3, 2006
i'm having trouble with some of the codes...
i'm suppose to create a code that searches a specific phrase/word in a row, then from that row, i want to mark the entire column, so that i can copy it and paste it in a new sheet
eg. find 'NE_KENNUNG', once it's found, mark the whole column "C"(the column may vary), copy the whole column, paste on to a new sheet
here's what i've written so far..
-------------------------------------------------------------
Private Sub CommandButton1_Click()
Search ("NE_KENNUNG")
End Sub
Sub Search(strSrch As String)
Dim xFind
MsgBox "in Suchfunktion !"
If strSrch = "" Then Exit Sub
View 7 Replies
View Related
Jul 5, 2007
I am looking for a visual basic script (macro) wherin I can copy fields from one sheet based on condition to main sheet. Sample sheet is enclosed as sample.xls. Here is what I intend to do: two tabs are there in sheet. master and work.
Need to check in "work" tab sheet if x name exists and if yes then copy three cells namely Input, Direct/.Indirect and code and paste all three cells in master sheet in front of X name wherever x name appears in resource name column.... Ultimately work sheet will be searched for all names which are in Master Tab and three field will be filled accordingly. Finally all the resources in resource Column will have three addditional field in mster sheet taken from work sheet.
View 5 Replies
View Related
Sep 5, 2008
I have a spreadsheet (range A1:P5000). B2:B5000 would contain cheque numbers. Many of the cheque numbers would be repeated and would have common data in columns C, D, E, F, G, H, L and N.
I am trying to get VB code to copy and paste the common data when a user enters a cheque number.
For example:
When a user enters a cheque number in B3, VB would check B2 for a match. If a match is found, then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C3, D3, E3, F3, G3, H3, L3 and N3. If no match is found, then the user would have to manually enter the data in C3, D3, E3, F3, G3, H3, L3 and N3.
When a user enters a cheque number in B4, VB would check the B2:B3 for a match. If a match is found (in B2 – for example), then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C4, D4, E4, F4, G4, H4, L4 and N4. If no match is found, then the user would have to manually enter the data in C4, D4, E4, F4, G4, H4, L4 and N4.
When a user enters a cheque number in B100, VB would check the B2:B99 for a match. If a match is found (in B90 – for example), then VB would copy C90, D90, E90, F90, G90, H90, L90 and N90 and paste them in C100, D100, E100, F100, G100, H100, L100 and N100. If no match is found, then the user would have to manually enter the data in C100, D100, E100, F100, G100, H100, L100 and N100.
View 14 Replies
View Related
Nov 28, 2012
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
View 3 Replies
View Related
Jun 9, 2009
I have one master worksheet with 1000 ID's. I also have 10 other spreadsheets with 1000 ID's. I need my macro to use the master worksheet and identify where the IDs are located among the 10 spreadsheets. If there is a match, then my macro should copy the entire row and place it in an output file (another spreadsheet).
The following code only tests the master worksheet and three other sheets (one being null/error is ID not found).
Sub Macro5()
'
' Macro5 Macro
Dim Raw, Mix1, Mix2, error As Excel.Worksheet
Set Raw = Sheets("RAW_DATA")
Set Mix1 = Sheets("Mix1")
Set Mix2 = Sheets("Mix2")
Set error = Sheets("error")
Raw.Select
For x = 1 To 1000
For y = 1 To 1000
If Raw.Cells(x, 1) = Mix1.Cells(y, 1) Then.................
View 9 Replies
View Related
May 15, 2007
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
View 9 Replies
View Related
Apr 15, 2014
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
View 14 Replies
View Related
Dec 5, 2013
I found some useful code for copying specific worksheets into a new workbook based on the sheet name, which I have not been able to alter to suit my needs.
I have a workbook that has a Master Sheet that contains a summary of each claim (Name, type of claim, dates, dollar amounts, etc.) and a sheet for each specific claim.
I know I can use the filter feature on the master sheet to view all of the physical damage claims (and one column has a hyperlink to the worksheet for that specific claim). But every month I have to create a report that shows each type of claim, dates, and so on.
I would like to create a macro that can copy the worksheets to a new workbook based on the type of claim it is. I'm thinking something like for each ws in wb if range ("F15") = 1 & .range ("B4") < 30 days from today copy that sheet into a new wb.
Below is a generic and far smaller version of my workbook. The name column contains my hyperlinks to the specific sheet. Each sheet is also named based on the text in the name column (so John Doe's sheet would be named 'John Doe') and so forth.
Date of Loss
Name
Cargo
BI
PD
Paid
Reserves
[Code] ........
View 1 Replies
View Related
May 6, 2009
I have two different functions, first is importing website to excel and the a second is testing string according to pattern. Each one of them is working ok. I'm trying to find a word " finance" in URL and put it into cell "A1".
Sub ParseWebsite()
Application.DisplayAlerts = False
On Error Resume Next
For i = 1 To 10
SiteURL = "URL;http://www.cnn.com"
With ActiveSheet.QueryTables.Add(Connection:=SiteURL, Destination:=Range("A" & i))
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False................
View 5 Replies
View Related
Mar 20, 2009
I'm trying to find a macro that will run allowing the user to select a 'starting record number' and a 'finishing record number' when printing.
I have a spreadsheet that feeds from a master list in excel, from over 5000 records.
I need to print the s'sheet with any given indivdual record's information at any given time.
Individual prints are fine. However if I wanted to print from record number 1500 to record number 3000 it would take me all day.
Is there a way I can set up a macro so an option form pops up? allowing selection of "From record" and "to Record" ?
View 13 Replies
View Related
Jan 30, 2014
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
View 5 Replies
View Related
Feb 15, 2008
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
View 7 Replies
View Related
Jul 8, 2014
I have a file which has in excess of 12,000 rows of data in 5 columns (sample file attached with fake data). The five rows are:
"First Name" "Last Name" "Name" (uses CONCATENATE to combine column A & B) "Email" "Date Attended"
There will be duplications in the list as people will have attended more than once over the years.
What I want to do is search through the email addresses (Column D with D1 being the header) and where there is a duplicate email address copy the cell to the right of the duplicate (F#) into the next available cell to the right of the first occurance and then delete the row with the duplicated email address.
I am on Windows 7 and Excel 2010
View 4 Replies
View Related
Jan 6, 2007
Im trying to record a macro that will enter a formula in a cell each time I run the macro
Drop the Lowest2:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10)
Drop Lowest1:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10)
I know I can write the formula in a simpler way, but I was asked to make it like this.
The problem is that when I enter the formula in the cell while recording. I got a message: "Unable to record" so this part can't be recorded
View 14 Replies
View Related
Sep 1, 2009
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
View 2 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Dec 14, 2008
Is it possible to add a row between every record, that has different data for 2 columns ( compared to the row below )
View 14 Replies
View Related
