VLOOKUP find the first value , and copy the whole the field that you wan. What if I want the VLOOKUP the entire column and sum up all qty of the search criteria, how to modify the formula?
=VLOOKUP(A2,[Book2.xls]Sheet1!$A:$B,2,0)
Book1.xls
Book2.xls
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI have a Spreadsheet that's essentially a results report...
At the top there's a header section containing fields for Project Name, Job#, Address, etc, etc...
I want to be able to enter the Job# and on a button click, have the other fields auto filled from a separate Workbook (Job Log) containing all this data...
What are your recommendations for the most effective method of doing this in VBA...
Will VLOOKUP or FIND be the better way to approach this task?
Column 'A' in Job Log contains the Job#'s, and the subsequent cells across the row contain the rest of the info that will be used to fill the fields in the report header...
using vlookup I am trying o find the highest value>>>>
e.g
Column A Column B
111036 01/05/09
111036 08/08/09
111036 09/10/09 <<<<
Is vlookup the correct way to go,,, if not could someone point me in the correct direction
I am trying to insert a formula to find the name (match?) from one column on say sheet 3 and return the value in the next column.
column a sheet 1
my name
your name
someone else
I would like it to search sheet 3 column a and return value sheet 3 column b
as sheet 3 would look like this
col a / col b
john q / 11a
my name / 13b
someone else/ 9a
your name/ 12b
What my goal is - is to only have to enter the column b in sheet 3 one time per name and have it fill in on sheet 1 for every entry of multiple entries of the same name in column a if that makes sense.
I know this should be simple- I want to avoid the if statement as there will be about 50 names to sort and return the proper class (column b)
=If(ISNA(VLOOKUP(B2, 'TableB'!$Y$2:$Y$100,1,FALSE)) , "",Column A in tableB)
I want to search tru all column B in table A. If i find an identical value in table B i want the field in table A to show the corresponding field in Column A in table B.
Also if there is 2 occurrences of column B in table B, i want the field in table A to show both values.
I have a very large database (42455 lines) which has three columns. The column A is a shipment number which is a combination of numbers and letters, column B is a ship date, column C is a dollar value for each shipment. This range (A2:C42455) is named SHIPMENTS. I have a second database right next to it that contains warranty information. Column D has the shipment number, Column E has the date the warranty call came in. These last two columns have only 2788 lines.
I'm using VLOOKUP in column F to match Ship dates with Warranty Call dates. The formula is:
=VLOOKUP(D2,SHIPMENTS,2,False)
and was dragged down all 2788 lines.
Out of the 2788 lines it did not find dates for 301 of them. Some of those 301 have Shipment numbers that are only numbers (no letters). As a test I copied one of the "unfound and all numbers" shipment numbers and did a control+F for all of column A and it found it. Clearly VLOOKUP is missing some of the Shipment numbers. I made sure that the Shipment number in column A matches the number in column D by cancelling out of the Find window and clicking on the found cell. Then I made sure there are no stray spaces tacked onto the end of the number and there were none. I hit enter.
At this point excel starts calculating again and when I go back up to the VLOOKUP (In column F) it has now found the data I've asked it for originally. I've not changed any of the values of either cell...All I've done is use Control+F to manually find the Shipment number in SHIPMENTS and then verified that there were no spaces in the found cell by clicking on it and using the arrow keys. Once that was done I hit enter.
Somehow this sequence of actions allows VLOOKUP to now find the cell.
can I use the same vlookup to find two different values? I need to find two different values and return the correspondent value or values.
View 2 Replies View RelatedI have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I'm trying to use a VLOOKUP formula in a blank cell on a separate sheet from my data.
Essentially I'm trying to search the sheet for the word "VIOLATION" and then report back what it says in field 1, which in this case is a date.
=VLOOKUP("VIOLATION",'Master sheet'!1:1048576,1,FALSE)
Right now I just get #N/A.
Eventually I would like to be able to find all occurences of the word VIOLATION and then have the dates all show up in one cell together seperated by commas if that's possible.
The idea is try to search the words from Column C in Column A and if some key is found, show value from Column C (As a simple Vlookup but column A contains sentences):
A B C D
This is a test test 1
This is a tst excel 2
test case 3 tst 3
case for excel
test 4
tst nº 5
Excel1.JPG
And expected result should be: (column B, contains the formula):
A B C D
This is a test 1 test 1
This is a tst 3 excel 2
test case 3 1 tst 3
case for excel 2
test 4 1
tst nº 5 3
Excel2.JPG
The idea is not to use. Column C could have more of 1000 entries.
I have a workbook with 32 worksheets. Data on 31 of these sheets all filter through to the one "Summary" sheet. The data on all the other worksheets is input manually and the lay-out is identical on each sheet. What I want to do is a Vlookup on the summary sheet for every sheet in the workbook, but without typing VLOOKUP(A1,Sheet1A:C,3,0)+VLOOKUP(A1,Sheet2A:C,3,0) etc etc (my sheets aren't actually called Sheet 1/2/3 etc, they have specific names).
View 4 Replies View RelatedI am using the Vlookup function to find a particular code in one sheet then give me the cost data that is associated with that code and put it into a similar cell in another sheet. It will work fine if I use (for example) A2 to E39 as my table_array. This would be fine if I only had 38 rows of data to look for the code on. However I have thousands of rows of data that need to be checked. Therefore when I change the table array to anything greater than E40, the vlookup will not work and it will only return a value of zero instead of the actual cost data. This is very weird and does not make sense that anything is wrong.
The only thing I can think of is that the vlookup function has a limit on the number of rows that it can look for data in. However, I did not think that it had a limit at all.
I have run into serious trouble with a file I am working on. I have 12,000 companies (roughly), and each of them appears in an Excel file multiple times (some 1 time, other 18 times) with a few parameters. The big file (about 90,000 entries) is sorted so it looks like below:
I will illustrate for 2 companies:
Company A 0 200
Company A 0 0
Company B 300 400
Company B 0 50
I need for every company to do a countif for each column on condition
that the value is larger than 0.
In this case I would end up with:
Company A 0 200
Company A 0 0
Countif result 0 1
Company B 300 400
Company B 0 50
Countif result 1 2
However, I need to extend this to the whole 90,000 entries and 12,000 companies and this cannot be done manually. I thought about vlookup but that returns the first entry only, and I have multiple.
I know vlookup can find specific text in a column when the formula resides on the same sheet. But for my actual application (a 15 page price list) I was attempting to use vlookup on sheet 2 and have it find specific text on sheet 1. Note that sheet 1 will be having additional rows added through out the table over time, so vlookup cannot use a specific cell location.
My attached example can simulate the problem by sorting the table by name (A-Z).
on sheet 1 in cell C39 i need to find data from sheet 2 in row B that is 534 as in C32 is 11.2 and on sheet 2, 11.2 equals 534
View 2 Replies View RelatedThe table to the right is actually in another workbook, both workbooks will be linked. What I'm trying to achieve is a vlookup formula that will count the items in the left table that have numbers entered into them. (This table will be located within a different workbook).
I have a large amount of data Range A1:DA6000 on Sheet2 in the following format:
120200 1885 | 42.43 | 130112 1992 | 49.65
120200 1886 | 45.95 | 130112 1993 | 48.08
120200 1887 | 47.65 | 130112 1994 | 49.77
120200 1888 | 45.97 |
120200 1889 | 48.34 | 130133 1887 | x
120200 1890 | 49.42 | 130133 1888 | 41.6
120200 1891 | 48.85 | 130133 1889 | 45.45[/list]
Cell A1 Sheet1 will be variable and I need to find the same value on Sheet2 in all that data and copy the number in the cell to the right to the clipboard. For example:
If Sheet1 A1 = 120200 1885 I want to find 120200 1885 on Sheet2 and copy 42.43 to the clipboard
Or if it's 130133 1887 I want "x" copied to the clipboard and so on.
I think I want to have a macro "Find" the cell and copy the one next to it, but I don't know the syntax to do that. The macro recorder only takes me part way.
I can't figure out how to make a VLOOKUP formula work, as there's way more than 65,000 lines to make a lookup table out of the data.
I want to vlookup from sheet2 cell E2 to find all matches in sheet1 in coulmn G and add totals together in coulmn E. The match I am looking for is used in several rows of coulmn G on sheet1. I only want cell E2 on sheet2 to give me total amount from data in coulmn E of sheet1 when a match is found in coulmn G of sheet1.
View 9 Replies View RelatedThis is probably easier than I'm making it on myself. I would like a formula that would find the value in D2 of the current sheet on a sheet named 6-19 in D:D, then take the value from L:L in that row and subtract it from L2 of the current sheet.
I've attached an example workbook : Cost Calc Upload.xlsx
I have a column using Vlookup to find values that I want to SUM.
Some of the look up values produce a #N/A and result in a total sum of #N/A.
How do I get the SUM of a column of numbers when all of the cell values are not in fact numbers.
I need a formula for F3 that will round-down E3 and find its corresponding row in the table to the right and find its intersection with the coating listed in I3. Does that make sense?
I've tried, to no avail:
=VLOOKUP(E3,$J$3:$Q$19,MATCH(I3,$K$1:$Q$1)+1)
=INDEX($K$3:$Q$19,MATCH(E3,$J$3:$J$19,1),MATCH(I3,$K$2:$Q$2,0))
I have a very complicated vlookup problem, at least for me. What I want to do is to find values from different firms in different years, by just changing the name of the firm in the formula. This is probably difficult to understand, but please refer to the excel sheet added.
View 4 Replies View RelatedI'm using VLOOKUP with MATCH to find data in a table. I now have to add a third condition to the look up. I've attahced a file as an example. I'm not sure how to list the data for the third condtion. I created another table with the data for third condition.
View 2 Replies View RelatedI need to to highlight keywords within a block of text (string). I don't need to necessarily return a value with the VLOOKUP. I just need to compare keyword list in Column B to the Text in Cell A1. If the word from the list appears in the text, I need it to be highlighted for every instance.
EXAMPLE
Text String (A1)
Welcome to Jake's Car Accessories website. We have all of your car accessory needs including car covers, truck covers, custom car grills and other car accessories.
Keyword List (Column B)
car accessory
car covers
truck covers
car accessories
I think VLOOKUP only works on lists.
I have a very large spreadsheet that I am using to track/analyze enterprise roles and the permissions that go along with each role. On the first sheet, I have a list of all employees (Name, Title, Department, etc) and on another sheet, I have a list of all Security Groups and Distribution Lists (with Members.) What I need to do is create a vba script that completes (1) a VLookUp using the Name column of the Employee sheet as the Criteria and then check against the first column in the Groups/Lists sheet for the matching name. If the employee's name from the Name column is found in the Group/Lists column, replace that name with the employee's Title from the Employee sheet. I then need this process to loop and continue through each column of the Groups/Lists sheet until all columns have completed. The end result should be that all names on the Groups/Lists sheet have been replaced with the corresponding Title found on the Employee sheet.
View 14 Replies View RelatedI have a table (table1) with material numbers which have a price . This value is time dependent i.e., a material 999 could have a price of $10 for 1/1/2008-1/15/2008 and $20 for 1/16/1008 - 1/31/2008.
A B C D
999 1/1/2008 1/15/2008 $10
999 1/15/2008 1/31/2008 $20
998 2/1/2008 - 2/25/2008 $15
I have another table (table2) in another sheet in the same workbook have a material and date.
A B C
999 1/10/2008
999 1/20/2008
998 2/15/2008
My requirement to take the material value and date in table2 and match it with table1 and get the value of column D in table 1 to column C of table2.
I have tried using vlookup but it only works for the first match and doesn't check for other values
below is the function that i tried
=if(and(vlookup(A2,Sheet2!A1:D4,2,false)<=Sheet1!B2,vlookup(Sheet1!A2,Sheet2!A2:D4,3,false)>=Sheet1! C2)),vlookup(Sheet1!A2,Sheet2!A2:D4,4,false),"error")