Find And Copy From End (bottom) Of The Worksheet
Apr 1, 2008
I copy information from one worksheet to another. Now i specify the range to copy in the macro. What i need is for the macro to find the end (last row) of data and than copy everything from row 5 to last row.
The below is a macro i currently use:
Sub Import_FNGC()
Const TARGET_FILENAME = "2008.xls"
'
' import_FNGC Macro
' Macro recorded 1/30/2008 by wwrobel
'
'
myMSG = "This will clear the data and import information. Do you want to continue?"
Response = MsgBox(myMSG, vbExclamation + vbYesNo, myTitle)
Select Case Response
Case Is = vbYes
Range("A5:BM100").Select............
View 9 Replies
ADVERTISEMENT
Feb 26, 2010
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
View 9 Replies
View Related
Feb 26, 2010
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
View 9 Replies
View Related
Aug 13, 2008
I now have everything set up to do exactly what I want except this last bit.
All I want is for the overview page to show the top three referrers for each month. At the moment, it's finding the top and bottom 'scorer' but if more than one has the same score I can only see the first alphabetically.
View 10 Replies
View Related
Sep 2, 2008
1. Find a text "State" in column 5 of a active sheet and copy that particular row to a new worksheet "Summary" including the header row.
2. Loop through other worksheets and add results to "Summary worksheet" without the header row.
View 11 Replies
View Related
Oct 27, 2008
I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
View 9 Replies
View Related
Jun 18, 2008
I would simply like a Macro to 'find' or search keyword data in a spreadsheet and copy the chosen rows and past them into a new excel sheet. I want to be able to do that as many time as I need, currently I have the following code, it does not seem to work well for me, I can only use it to search one time, cause an error after that
Sub FindIt()
Dim rngWB As Range, c As Range
Dim strFind As String, firstAddress As String
Dim wsCount As Integer, ws As Integer
Dim rw As Long
strFind = Application.InputBox("Type in the name you wish to find.", "FindIt", Type:=2)
Application. ScreenUpdating = False
Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "Blank"
Sheets(1).Select...................................
View 5 Replies
View Related
May 28, 2009
I understand how to find the top 5 /bottom 5 values using the large/small functions, but the question I have is: How do I get associated fields. For example I attached a sample sheet with values (Fields: Ticker,TE,Sector,Return). How do I get the Ticker,Sector that the return is for. I'd like to show all the associated fields that relate to the retun, but I can't find the solution on how to do that.
View 3 Replies
View Related
Sep 24, 2009
On some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 Replies
View Related
Dec 31, 2012
I am using Excel 2007 on Windows Vista Business 32 bit. I have several workbooks. Each one contains 33 worksheets. 31 of the worksheets are for each day of the month, the other two are for yearly totals and revision history. Recently, a menu bar has appeared at the bottom of my worksheet. At the left is an icon that states that no macros are being recorded, click here to start recording. The center of the bar is blank, but placing the mouse over the bar brings up a customization menu.
At the right side of the bar are three icons dealing with page layout. As I scroll down the worksheet entering data for the day, the cursor goes below the bar and the screen does not move up as it used to do. Also, by using the arrows keys to scroll down, I do not see the bar containing the worksheet names. Luckily, I have a macro that allows me to save the current days worksheet and move to the next one, otherwise I would not be able to do that. When I open a previous month, the bar is there also, so it must be a flag that I can't find or don't know about. Is there a way to get things back to normal?
View 9 Replies
View Related
Dec 3, 2007
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
View 4 Replies
View Related
Nov 13, 2008
I am doing a financial statement for a person but I did not create the workbook. The book has two sheets linked together. I am overwriting the names and numbers from last year's form. I have run out of lines on the first sheet and don't know how to copy and paste the macro to the bottom of the sheet so that I can carry on with inputting my numbers. Here is a sample of the workbook.
View 4 Replies
View Related
Oct 12, 2012
I have a macro that I recorded which is supposed to copy the contents from row 38 of my calculate sheet and paste the values of it below the last record on my monthly summary tab but it is not pasting below the last row of data. It keeps pasting to the top record. My code is below:
Code:
Sub Copy_Record()
'
' Copy_Record Macro
[Code].....
View 9 Replies
View Related
Mar 26, 2007
Is there a way to copy a series of cells from top to bottom, then paste them back so the would be bottom to top?
View 9 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Aug 2, 2012
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim nextRow As Long
If Target.Column = 11 And Target.Cells.Count = 1 Then
[Code].....
View 2 Replies
View Related
Jul 30, 2009
I'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
View 2 Replies
View Related
Feb 5, 2014
I have used a formula to achieve this before which seemed to work although now it seems to be replacing other data already in the worksheet so I am unsure of how to fix, thinking I should just start again.
The file in question is a tracker of activities, Column A (sheet1) is the Status and once the status is "Closed" I need to run a macro that copies all closed activities to Sheet5 at the bottom of previous closed activities. Once this is done I already have a macro to delete all "closed" activities from Sheet1 meaning that it is vital the new closed activities stack onto the bottom of previous closed activities.
The Column Headers start on Row 11 with activities running from Column 12.
View 1 Replies
View Related
Feb 3, 2010
I am getting ready to create a spreadsheet to list vendor's names and emails along with other data. I would like to include at the bottom of the email addresses a quick copy and paste distribution list. I have achieved this in the past by using a similar formula:
View 4 Replies
View Related
Apr 13, 2009
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
View 2 Replies
View Related
Nov 22, 2006
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
View 3 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Mar 27, 2014
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook?
I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
View 2 Replies
View Related
Feb 14, 2009
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
View 10 Replies
View Related
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Dec 15, 2009
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies
View Related
Jun 19, 2013
I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
View 2 Replies
View Related
Dec 11, 2008
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies
View Related
May 12, 2008
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
View 9 Replies
View Related
