Find Value From Cell On Another Worksheet
Feb 19, 2008
I have a 4 tab worksheet containing Control, RawData, F, Dan. I need to know how to copy calculated values for one specific customer from the RawData tab to certian locations on the Dan tab matching the customer number on RawData tab.
RawData Tab colum (V) cells (2-99) will always contain one customer value at a time, and the calculated values will always be in cells E100, H100, and H101, but I need to copy the data in specific cells to the row/cells that matches the customer number on the Dan tab that contains all my assigned customers.
for instance if i'm pulling a report for customer 1-222-222 I need to know how to place the calculated values from the RawData tab to the row designated for customer 1-222-222 on the Dan tab in the required cells.
View 9 Replies
ADVERTISEMENT
Jan 30, 2010
I’m having trouble trying to get a form, once activated;
- to use a specified cell value (offset from the target cell),
- to search another sheet for that value,
- then return values, (offset from the find value),
- to a series of textboxes.
Later, if the user if edits any of the textboxes, to perform the same procedure, pasting those values in the appropriate cells.
View 2 Replies
View Related
Sep 28, 2009
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
View 3 Replies
View Related
Jun 21, 2006
if there's a way to find the first non-empty cell in a worksheet?
Here's what I'm trying to do, the incorrect syntax is underlined:
If IsNotEmpty(123, 2) Then
'Execute some code
End If
View 5 Replies
View Related
Feb 28, 2007
I am need of some code that I can assign to a button that will take a user to the first empty row of another worksheet in order to do some data entry. I only need to look in column A, which is titled "Tag Number."
View 2 Replies
View Related
Mar 26, 2008
I have seen a few examples which find the last used cell... but these seem to grab cells that have formulas in them, even though no text has been entered. I need to know how to find the last cell in a worksheet that contains text.
View 6 Replies
View Related
Jan 13, 2010
In Sheet1 I've got a list of names in column A, then I've got a worksheet for each name in the list. I'd like to fill in column B with information from the worksheet of the same name as in column A.
Quick example...name in column A is Davis, want to fill in column B with a value from cell C3 on worksheet named Davis and do it for the entire list. Data being looked for is in same cell on each worksheet. Tried using a formula and dragging it down the list, problem with that is it doesn't change the sheetname just the cell.
View 3 Replies
View Related
Mar 25, 2009
I want to know how to find certain String and select the cell it on finding the String.
View 10 Replies
View Related
Jul 27, 2007
I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.
How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?
For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range
LineID_Value = LineID.Offset(0, 8).Value
'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then
ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value
'End If
End With
Next LineID
View 3 Replies
View Related
Jun 6, 2007
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies
View Related
May 20, 2008
I have three parameters that users on my spreadsheet will be using. They will be searching using the 'Brand', 'MPAN' and 'Tariff' fields.I would like to have drop down menu's for then to select the correct search option. I then have another sheet within the same workbook with all the data in it with columns headed of Brand', 'MPAN' and 'Tariff'. It has to be an excat match using those three parameters though. I would like the parameters the user selects on the first sheet to be searched and found on the second sheet, with the figures in the cells next to the search result getting fed back into a set cells back on the first page.
View 9 Replies
View Related
Nov 7, 2013
I have a worksheet named "ABC". In row 4 of this worksheet, each cell from G to BG is numbered from 1 onwards and each cell has a unique number. I would like to have a macro ask the user through a pop-up question box which column data should be calculated in. For example, if the user types "1" in the question box, the macro will go to column G which has "1" in cell G4 and will select G5 the cell just below the column the user defined and calculate the formula.
View 6 Replies
View Related
Sep 26, 2013
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
View 8 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Feb 26, 2010
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
View 9 Replies
View Related
Feb 26, 2010
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
View 9 Replies
View Related
Feb 14, 2009
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
View 10 Replies
View Related
Dec 13, 2013
With reference to the attached workbook, I need to write a VBA code which will look up the value in cell T4 from worksheet "tdploader" on the "cashbalance" sheet and return the date in row 1 based on which column the value is found e.g. H1 in the attached workbook example. The date should be returned back to cell P4 on the "tdploader" sheet. I have tried to use the Find VBA formula to no avail.
View 1 Replies
View Related
Feb 14, 2014
I have a workbook with two sheets. I have one macro that saves the text of the active cell in sheet 1 for later use, the macro then switches to sheet 2 and using the find function I want it to search for the variable I just setup but I keep getting run-time error 91.
Here is what I have:
[Code] ......
I get the run-time error 91 with the Find lines of code yellow and the arrow pointing at the last row. I've tried all kinds of variations (with and without Activate) of the find function and as long as it is searching in sheet2 for the variable that was made in sheet1 it will NOT work. If I do this same search on Sheet1 I get no error. Also if I change the string name in Find to the same exact text just with quotes on it it will find that text without problem in Sheet2. But if I use a string I get an error.
Once I get this to work I want to save the address where the string is found in Sheet2 and use that address later as well so how to get an address from a Find result.
View 8 Replies
View Related
Feb 5, 2009
Should be an easy fix for experts, but I'm not one of those...
I'm trying to create a "scoresheet" in Excel where a racer has a name and an ID number on the main tally worksheet, with columns relating to their scores for each race. Subsequent worksheets have results from each race (one race per sheet), with the individual referenced by their ID number.
How do I have the main tally sheet "find" that person's score for each event in separate columns so that it can add up their totals? I tried an IF formula to find each score in the subsequent sheets, but that didn't work.
Is there a simple formula to do this? I've been achieving the results by importing the worksheets into a Filemaker database (where the ID number "matches" and updates each score), but that's a pain, and I'd rather do it all in Excel.
View 11 Replies
View Related
Jan 18, 2010
I have two worksheets to track students registering for one day workshops, which are offered monthly. In my first worksheet called 'CourseCapacity' I track the number of students that can register for each workshop. It looks something like this:
Col A - "Title"
Workshop101
Workshop102
Workshop103
Col B - "Capacity"
5
10
7
My second worksheet tracks the current number of students registered for each workshop for each month. What I want to do is read the course capacity from the first worksheet and display it for the monthly offering of each workshop.
Col A - "Title"
Workshop101 - 1/23/2010
Workshop101 - 2/20/2010......................
View 4 Replies
View Related
Nov 19, 2008
I need to do a find and replace on cell E13 on every worksheet in the workbook - a several hundred pages. The sheets are individually named not Sheet1, Sheet2......
First of all I need to find say "oldchippy" (without quotes) in cell E13 and if its there replace it with "oldchippy2", if its not there leave the contents as it is.
View 3 Replies
View Related
May 12, 2008
I have a file with 2 worksheets: Worksheet "Data" contains Store Locations, Store Numbers, Categories, Brands, Sales, Clusters, % Demand, etc.
Under % Demand on Worksheet "Data", I need a formula to look for % Demand from Worksheet "Stores" that related to the same categories, brands and stores numbers.
View 14 Replies
View Related
Jan 14, 2014
Let's say I have a value (N) in Cell A1 of Sheet 2 in Workbook A.
What I want to do is to Find the row number of the first cell and last cell that contains the value (N) in Sheet 1 of WorkBook B.
View 6 Replies
View Related
Jan 15, 2008
I need a formula that will look up to find a specified date on another worksheet, and input the data in the cell that is 4 columns to the left of it. Can this be done?
View 9 Replies
View Related
Dec 9, 2009
I want to find a text "Style#" in a worksheet and return the value next to "Style#". The value is supposed to be returned in, say, column H, for each row I found the text "Style#".
Below is the sample:....
View 10 Replies
View Related
May 23, 2006
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies
View Related
Mar 18, 2009
I believe this rightmost column number information is available. I just could not find it!
View 3 Replies
View Related
Feb 7, 2014
I've taken some time to learn about building an excel data entry form. I'm looking to add a find button.
1) users would type in something in the ID text box, then click on "find". The code will then try to find that record in the worksheet(just sheet1).
when it is found, i want the forms to auto-populate values from that row.
right now, the search works except when you are trying to search a value that that is NOT in the worksheet. I'm getting an error message that i've never seen before.
[Code] .....
form based input.xlsm‎
View 2 Replies
View Related
