I need to create a macro code to adjust the width of the columns so it fit in one page for printing. So If it only has 3 columns, the widht will be wider but if it has 200 columns then the width will be much smaller.
View 2 RepliesI have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies View RelatedI have a set of pages I'd like to print on both sides of the paper, in excel the pages are laid out side by side.
I'd like to print them so that the double page spread is on two bits of paper, as in a book, then, you can turn the page and see the next double page.
At the moment, when I print, I get page one, then turn and see pages 2 & 3.
How do I print a "page 0", then turn over to see pages 1 & 2?
I need a code that will print a page only if there is a value in cell G4 for example.
Im think I have part of the code but cant work out the " if " part
ActiveWindow.SelectedSheets.PrintOut From:=1, To:=1, Copies:=1, Collate _
:=True
I am making a project in which there is vast data of around 10-15 pages to get print...but due to vast data its not possible to get all printed in 1 pages...So i want that cell A1:K4 & A47:K53 to get print in every sheet...Header and footer is not posisble due to some logo at the end of the page..is there anyway for such printing option...
View 9 Replies View RelatedWhen printing, how to automatically add a line at the bottom of each page? I don't want to make the line physically there. Just show the line in the page when printed.
View 2 Replies View RelatedI'm trying to scale a worksheet so that when it prints it fills the entire A4 page.
I have used under the print preview menu - page setup option the fit to 1 page with by 1 page tall option. This creates a blank space at the bottom of printed area.
Is there any way I can get Excel to stretch the vertically side of things so that it fills the entire page?
Is there a way to print my columns headers in every page?
Everytime I have to print my spread sheet, I always have to keep page#1 in hands, because I cannot remember the headings.
I have a list that I need to print. It is only 2 columns, but 12 pages long. I would like to print 4 or 6 pages, side by side on the same sheet. I tried changing the print setting to 4 pages per page. But, when I looked at the print preview, it showed only 1 page per page.
View 11 Replies View RelatedWhen I go to print my 1 page document, I've selected to have the page shrink to fit onto 1 page. For some reason, when I choose this option to shrink, it doesn't print the entire document, only about 3/4 of the page or so. Something I did recently that was a little different that may have caused this but am honestly not sure is i added my company logo to the header so it'd print on the document too. If I added it as an image, for some reason it wouldn't print.
View 7 Replies View RelatedI have a workbook with 8 sheets. Two of the sheets have 31 pages (one page for each day of the month). I have to input data every day into these sheets on the current day (ie: If the first day of the current month is Sunday, that is page 1). I have to print out the current days page (not the sheet) after it is complete. Is there a macro or vb code that will print out the current day/active PAGE only? As it stands, I have to do the ctrl+p thing to get the print dialog box, and input the page I want printed....as you know, I have to input the page twice in the dialog box to print only one page, otherwise it starts to print from the page I chose.....and if I don't pay attention, I can print 30 pages when I only wanted one.
View 9 Replies View Relatedin my file i have rows/columns a1:z50. now my requirement is that rows as header a1:a3, as footer a47:a50 and columns a:c to be printed in every page.
View 9 Replies View Relatedis there a macro code that will autmatically determine the end of your page and adjust your page breaks accordingly?
View 9 Replies View RelatedI am trying to take a spreadsheet and have each row print on a seperate page - without having to do the print area thing on each row. Is there a way to automate this process?
View 2 Replies View RelatedI'm working on a simple spreadsheet with individuals divided among teams. Each team is separated by a page break, so the column displaying Team Name repeats the same team name all down a page, and then another team name all down the next page, and so on. I've been searching for a way to display one instance of each Team Name as the Page Header (or just at the top of each page) upon printing. I've included an attachment for reference.
View 3 Replies View RelatedI have a worksheet that changes in length. There is a formula that calculates how many pages the sheet will be. The also is a print button on the sheet that will print a coversheet "Sheets("Title")" and then it is supposed to print the data on the second sheet. Below the code I have so far... I know I am missing something, but knowing very little about macros I just can't seem to figure it out.
View 2 Replies View RelatedHave very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
I am trying to find a way to print an "entire workbook", but have each of the sheets paged as a group separate from the rest. One workbook typically has up to 20 sheets, with each sheet up to roughly 8 pages. I need each sheet set to show page 1 of 8 or page 5 of 8, not page 22 of 53. Counting and typing in the total number of pages in each sheet's footer is too cumbersome. Also, printing each sheet individually has also been cumbersome when printing to PDF. Are there any other ways to have the "&[Pages]" function only reflect the number of pages within the sheet instead of in the entire workbook?
View 9 Replies View RelatedI have a workbook with multiple sheets where the view for each sheet is the Normal view.
If I print the entire workbook, the active sheet changes to the Page Break Preview view after the printing finishes.
I have to then reset the view back to Normal.
I don't know why the active worksheet is changing. I don't want to annoy the people who will use this workbook by making them change back to normal view after each time they print.
Designing a proposal on MAC EXCEL 2011
1 workbook with:
1 page needs to print vertical
1 page needs to print landscape
Is this possible? (without reloading paper and printing a second time)
Right now I can only get it to print landscape OR portrait but not both ...
I'm struggling with getting my Excel worksheet to fit nicely on the pg for printing to .pdf. I could tinker with column widths manually to work this out for a printed report. But I need to print a couple hundred reports with varying column widths, so I need a vba solution.
The context is that I'm using vba to process two sets of interlinked data on a worksheet. I only want to print one set of data, and keep the second set out of the print view. To do this, I'm keeping the first set of data in columns 1 to 10 and the second set of data in columsn 21 to 30. I set the print range to only include columns 1 to 10.
This works fine for keeping the second set of data off the printed pg. The problem is that there is always a gap between the end of column 10 and the maximum width of the printed pg. Given the formatting of the report, this doesn't look very good.
I know that page setup offers the "fit to" option. This would work if I wanted to fit everything on the worksheet on the pg, but I don't. I just want to fit columns 1 to 10 to the pg. Is there a way to do this, allowing for varying widths in columns 1 to 10? Is there a way to do it via vba?
I have a sheet with a few hundred rows of data which I filter out by using a very simple autofilter. I have set page breaks throughout the whole sheet on certain rows I need to start on a new page. If the auto filter filters out any of these rows when it prints it prints a blank page where that row would have been before it was hidden by the autofilter.
For example the whole list is say 5 pages (set with page breaks) I apply an auto filter that now reduces it down to 2 pages say the 1st and last page of the original list. If I page break preview it, it shows me that it will be 2 pages but when i print preview/print the sheet it prints the 1st page then 3 blank pages then page 5 even know that the page break preview only shows and numbers 2 pages. Because the original page breaks are still there just are hidden by the autofilter so it adds them in as blank pages
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies View RelatedI have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.