I have user form which allow user to entry their inputs in required boxes (Like TxtFirstName, TxtLastName etc.)
My form is working but which I want is that users should first fill up txtFirstName Text Box. Otherwise we will not able to do edit his/ her name in the last Name Text Box (TxtLastName).
Is there any way to do that?
I'm trying to force a user to enter a numeric value, (one numeric value between 0 and 8, inclusive) into a range of cells, prior to exiting the spreadsheet.
The range would be D7:D252, and a single value would have to be entered into each range prior to exiting the spreadsheet.
I need to force users to enter one of these words only (Year End) or (Qrt) using inputbox method.
Note that user must not leave the inputbox until he/she enter one of these words.
Have a drop down list in B2 but if what they want is not in the list the can select "other",
If this happens i want to force them to enter something into the next cell B3.
In my userform, I have a textbox where I enter a number.
When I hit the return key in the textbox, I want the userform to act like I hit a commandbutton_Click. (The commandbutton_Click takes the contents of the textbox and locates a line with that number in it in a specific worksheet, and then displays the line of info in other textboxes in the userform).
I have not been able to figure this out.
I am trying to force users to enter data in 5 separate cells in a worksheet. I have tried editing code I have found here, but just can't get it to work.
It is in the second sheet of the workbook and the sheet is called Invoice - the cells I want to force entry into (and the message I need) are as follows.
J2 - You must enter the salesperson's name
J4 - You must enter the customers name
J5 - You must enter the customer's address
J6 - You must enter the customer's postcode
L2 - You must enter the Invoice number
I am trying to have a macro send the data from sheet 2 to sheet 3, record the data then next time shift down a row and enter the new data below and below every time new data is entered.
I have recorded a macro, but I am stuck with the recording the data and then returning to a new row.
I have designed a project sheet that shows Project,tasts,start & end dates, with cells being highlighted via conditional formatting using the between format, What i would like is for the macro that i recorded to enter the data(which is c/f to a new row, At present when i run macro it reruns on the same row,the filldwn method dosn't work either, For design layout i have based it on microsoft project
I have Excel file that is linked to Access Database. Everytime the user opens the file, there is pop up message that warns the user we there to enable the macro or to disable it. I want to force the user to enable the macro or even better if I can make disappear this warning and automatically enable the macro. See attached for more details.
View 3 Replies View RelatedI'm trying to force the user to fill in three of the four available cells.
Initially they have a choice of filling in data for either:
Sheets(1).Range("C4")
or
Sheets(1).Range("C6")
But after that both Sheets(1).Range("C8") & Sheets(1).Range("C11") cells must also be filled in.
So it's either cells:-
C4 + C8 + C11
Or
C6 + C8 + C11
I want to change data through a user form and disable users from going around my form. I want users to see the underlying spreadsheet as the form manipulates data.
If I enable a form in Modal mode users can bypass the form. If I use it without modal form I can't change data from my form. I seem to be in a catch 22.
I have two columns, Account Number and Account Type. I already use Data Validation on Account Number to make sure it is numeric and on Account Type to make sure the user picks from a drop-down list. I want it so that if a user inputs an account number, it forces the user to automatically pick from the drop-down menu in the account type column, otherwise post an error.
View 3 Replies View RelatedI am attempting to use an if statement to stop a user from trying to input a listbox as a null value. The if then statement is not working. The listbox value is null but the if statement doesn't react.
If listbox1.Value = Null Then
MsgBox "you must select a serial number"
Exit Sub
End If
Currently using LEN to simply count 50 characters then it tells the user that they need to move onto the next line.
Is it possible with VBA that after 50 characters reached in the selected cell it forces the user into the next cell below and so on in a loop?
I have a spreadsheet that has a button named Exit Requisition Program on it to close the application with. When the button is used everything is wonderful. All of the data on the sheet is saved and the application closes. I have a problem with some users clicking the red X without saving changes and that creates a big problem.
What I need to do is any one of several things.
1. Remove the red X completely.
2. Deactivate the red X.
3. Have a message box pop up instructing the user to use the Exit Button when the red X is used. Any one of the three methods listed above would work for me.
I am utilizing the following code to force the user of my database to enable macros. This is the
View 4 Replies View RelatedVBA code to get userform input from form to "Data" worksheet. Data starts at columns A3..AG3. I need the code for the "Input" button to put Month, Date, Type, Comments under their corresponding columns and the "Amount" to go under the appropriate column that is selected by the Option Button. I've included a picture with in "red" comments.
View 8 Replies View RelatedI'm working on a spreadhseet which has several macros that can take up to 5 minutes to run. When the macro(s) complete, I pop up a userform to provide instructions and collect some additional data from the user.
The "problem" is that when the user moves to another application to do other work, the user form remains hidden behind the active app. I've added some text to the status bar to let the users know the processing is done, but they would like something more obvious - so, is there any way I can force focus back to Excel?
I'm trying to record a macro which will hide and unhide columns K:P of data, but I only want one button. I know how to do this to produce one button for hiding and another for unhiding...but I want one combined button.
How to use vba, how I do this via the macro recorder?
I am looking to find a way and synthesize code that will prompt the user for text data when he/she clicks a radio button, then place that text data in a "Notes" worksheet within the same workbook. Given that there are multiple radio buttons, with options of "OK" and "attention needed" (it is a checklist of maintenance items), I also need to find a way to have each note listed sequentially in the notes worksheet. My questions: Is this possible using macros? Can you steer me in the right direction? (change event, inputbox, then what?)
View 3 Replies View RelatedI have a userform where I want the user to enter the date (US Version)
I want them to enter 121311
I want the textbox which I am using to show 12/13/11 when they exit from it.
Here is my code i am using:
Private Sub mm_built_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim mm_date As Date
Me.mm_built.Text = Format(mm_date, "mmm/dd/yy")
End Sub
What shows when they exit the entry for the above is Dec/30/99
How do I get it to show correctly?
i have some code that allows my users to enter their user ID on double clicking. The worksheet code below shows how on double clicking into Colum 3 (If Target.Column = 3 Then) then the user ID will appear. Q: How do i get the code to work in Columns 3, 5 and 7 but not those inbetween?! I tried using "or" but it allowed the ID to be entered into all columns! i.e. 3,4,5,6 and 7 which is not what I require. In short I need the ID to appear on double clik into every other column.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim user As String
'This refers to the function ReturnUserName, which takes the name from the NT environment
If Target.Column = 3 Then
Target = ReturnUserName
Cancel = True
End If
End Sub
i need an inputbox to appear asking the user to enter an amount(we'll call XX).
Now the code will find that value in Column F, and delete the row that contains the value XX in F
I am trying to create an input box where the user can only enter a whole number between 1 and 99. i can create the input box but am having trouble specifiying it can only be a whole number between 1 and 99.
I've created a calendar user form, much like many of the examples I seen posted here. I've tried all that I could find but none would allow the user to use the Enter Key to make the selection like the mouse click.
I would like the use of the Enter Key to produce the same results as a Mouse Click.
What I am after is a user form that pops up when I enter ‘Y’ in cells in Column ‘L’ which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name
Surname
Code
Address line 1
Address line 2
Address line 3
Address line 4
Address line 5
Post code
Telephone
Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a ‘Print’ button to print the form would be beneficial. The only other button required would be a ‘Close Form’ option.
I have 4 textboxes that the user enters data. I then have a button on the user form.
i would like to write code so that when the user hits the button...
Textbox1 data goes into active cell
Textbox2 data into the cell below Active cell
Textbox3 below it
and textbox4 below it
then close the user form.
Is it possible to lock a cell so that the user must enter the number manually as opposed to using a formula.
There is a cell on one of our spreadsheets that the user should be hand entering the numbers from the general ledger this is done to ensure that the general ledger balance is the same as the spreadsheets totals. However most of the user insert a formula that just copies the number from above into this cell that should be hand entered.
i want to do is throw a break in my vba code if the user selects yes through a msgbox vbYesNo prompt and proceed in debug mode. is it possible to code in a break point in this fashion? my desired pseudo
if user selects yes:
set break point (to send to debug mode at that point... i dont mean to end the code with a END statement.)
if user selects no:
proceed program normally
Using excel 2011 for mac and would like to learn how to write and record a macro to link to a button to "go to a layout and cell"
View 4 Replies View Related
