Format Cell Based On 2 Cells?
Nov 6, 2013If F2 is blank and E2 date is older than or equal to today, bold and color E2 RED.
View 2 Replies
ADVERTISEMENT
Cell Number Format Based On Another Cells Value
Oct 21, 2007If Cell A1 in my spreadsheet is 1, then cell A2 should appear formatted as a percentage. So if a user enters 9000 into cell A2, it should appear as 9000%. If Cell A1 in my spreadsheet is 2, then cell A2 should appear as a comma-formatted whole number. So if a user enters 9000 into cell A2, it should appear as 9,000. Conditional formatting doesn't appear to let me do this.
View 5 Replies View RelatedFormat Cells Color Based On 1 Cell
Nov 24, 2007I want to format a group of cells color based on the value of one referance cell. Example would be: If a1 is adn "X" the the results in cells b1 thru b10 would be green else they would be blue. Is there a way to do this using Excel 97?
View 3 Replies View RelatedFormat Color For Range Of Cells Based On Cell Value
Jul 1, 2008I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:
Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.
Format Cell Color Based On Others Cells Not Being Blank
Jan 9, 2008I know that I need to use Conditional Formatting, but I can't get the formula code correct.
This is what I need it to do:
If cell A2 is populated (not blank) AND cell B2 is blank, then cell B2 to be highlighted in bright red fill.
If cell A2 is populated (not blank) and cell B2 is also populated (not blank), then leave formatting as per normal
If cell A2 is blank then leave formatting as per normal
Basically, as soon as someone types anything into cell A2, cell B2 to turn red. Then once they have input something into cell B2, the red highlight can disappear. The inputs will be text, not numbers, so I can't use </>
I have tried varying circumstances of IFs, ANDs, NOTs, ISBLANKs etc and I can't crack
Conditional Format X Number Of Cells Based On A Single Cell?
May 4, 2014I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
Conditional Format Color Of Cell Based On Values In Range Of Cells?
Oct 24, 2013I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
VBA Conditional Format Range Of Cells Based Upon Criteria In One Cell / Repeat For All Rows
Apr 3, 2014Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
Change Cell Format Based On Existing Currency Format
Jun 12, 2008I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedFormat Cells Based Upon Being Outside Scope Of Calculation Of 2 Cells
Feb 6, 2008I am comparing a set of common variables across 2 sets of independent financial data. When comparing a variable across the 2 sets e.g. profit I want to colour a neighbouring cell based on the size of the difference. For example if the difference between the two values is within plus or minus 1 make it green, plus or minus 5 red etc.
View 5 Replies View RelatedFormat Cells Based On Their Value
Jun 14, 2008I was wondering if anyone knows how to create a formula that is dependent on the colors of a range of cells subject to conditional formatting. For example, I would like something that could answer =if(A1 is red,"Phillies",if(A1 is blue,"Mets","Marlins)). However, the text color will be generated from conditional formatting, so most of the VBA code I have found thus far isn't working properly. Does anyone know of a solution?
View 4 Replies View RelatedConditional Format Formula Based On Two Cells.
Apr 9, 2009I want to create a conditional format formula which is based on values in 2 cells.
Example:
Cell B1 = 100
Cell C1 = 50
I want a formule for cell A1 which turns red for exmaple when B1 is higher then 85 and Cell C1 is lower then 85. Only in this case the conditional format should work.
How To Conditional Format Based On Adjacent Cells
Oct 18, 2013Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
Format Based On Three Different Cells - IsError Check
Oct 30, 2013I have a worksheet that I want to format based on three different cells. I had it set up with the following:
Code:
For i = 2 To LR
If Cells(i, 13).Value = "Price Mismatch" Then
Cells(i, 1).EntireRow.Interior.ColorIndex = 39
[Code] ........
Worked fine until one of the cells had an error in the result, I want to have this row colored also. I altered the first check to :
Code:
If Cells(i, 13).Value = "Price Mismatch" Or IsError(Cells(i, 13)) = "True" Then
I have tried multiple variations without success. I need to have the row colored if the value in the cell on the row in column 13 = Price Mismatch or is an error.
Change Cells Format Based On Selection
Feb 15, 2010I have created a named range that includes raw data layed out in 4 columns (Finish Name, Fill Color, Pattern, Font Color). On a separate sheet, when one of the finish names is selected in a particular cell, I want the cells fill, pattern, and font color to change according to the raw data. Below is the vba code I am trying to get to work. However, it is not working. It does not break, but does not achieve the desired result. It looks like the variables are getting set correctly, but still not changing the cell when they are referenced. I am only testing it on the first finish color, as seen in the code. All of the rest are static values for the cell, but I want the values to be dynamic.
Sub SetFinishSeparatorColor()
ActiveCell = frmFinishSeparator.cboFinish.Value
Set rngTarget = ActiveCell
With Sheets("Pick List Do Not Tamper").Range("Finish_Cell_Color")
lngFinishCellColor = . Find(What:=rngTarget, After:=.Cells(1, 1), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Offset(0, 1)..............
Format Cells Based On Conditional Count
Feb 15, 2010I have a drawing register that contains drawing reference numbers in column D. When a new revision of a drawing is issued it is added to the bottom of the list. What I would like to do is any previous revisions to be greyed out and struck through.
The conditional formatting
= COUNTIF($D$1:$D$100,D1)>1
works well but strike through all duplicates, I need the most up to date left without the format until it is superceeded
Number Format Based On Corresponding Cells Text
May 15, 2008Cell L90 to L120 are input cells where I type " Percentage" or "Dollar Amount". I need the five cells to the right of each input cell starting two cells over, to be formatted accordingly. I read a thread similar to what I'm asking for suggesting a worksheet change macro, but I can't quite figure it out for a range of cells. Also, in case I need to add a row to my sheet before all of these cells, how can I make sure that this will still work without having to go into the code. Is this an activecell thing?
View 5 Replies View RelatedFormat Cells Based On Values In Pivot Table
Dec 23, 2009I have a pivot table and next to it I added some calculations which are based on data from the table. In my "real" file, the cells next to the PT are formatted with conditional formatting based on other values in the sheet (see attached sample file). What I now need to do is add borders to the cells in columns “D:G” only if the cells in “B5” and downwards are not empty. I have tried doing it with conditional formatting but there are some other rules which contradict this setting.
The idea is to make the cells in columns “D:G” look like they are a natural extension on the PT. However, the table can grow or shrink (in length) and I want to see borders only around cells that are on the same rows as the data in column “B” (staring with B5). I think that whatever solution you can provide (if you can...) should be based a workbook_change event, because in my “real” file, the length of the table is changed whenever I select a different “page” of the PT.
Multiple Conditional Format Conditions Changed Based On Another Cells Value?
Jun 12, 2009A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
Auto Format Some Merged Cells Within A Sheet Based On The Information In Them
Feb 22, 2010I am trying to auto format some merged cells within a sheet based on the information in them. how to reference the information within theses cells?
View 5 Replies View RelatedConditional Format Cells In Jan - Dec Columns Based On Next Column Data?
Jan 29, 2014Wondering if it is possible to conditional format cells in "Jan"-"Dec" columns based on "Next" column data?
What I need is (lets say fill colour to differ) in one cell per row, based on latest input and "next" data.
Month Avg
Date
Jan
Feb
Mar
Apr
May
Jun
Jul
[code]......
So for example:
row2: May is latest input so need fill in cell +2("next" column data) from may. In this case July
row3: Feb is latest imput and "next" also 2. Result should be Apr
row8:May is latest input, "next" is 6. Res should be Nov.
Finally, only one cell per row to be highlighted so need to overwrite colour fill when new data input in a cell already colour filled.
Automatically Format Range Based On Formula Result Of Cells
May 16, 2009The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
Macro That Will Clear Contents Of Cell Based On Format Of Text In Adjacent Cell
Feb 18, 2009Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedConditionally Format Cell Based On Another Cell That Is Manually Colored?
Nov 24, 2013let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies View RelatedChange Result Cell Format Based On Input Cell Value
Mar 24, 2007Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
View 2 Replies View RelatedFormat Row Based On First Cell Value
Sep 21, 2012Y3:Y500 contains a range of years, 2014/2015 through to 2018/2019, for a total of 5 different values (So conditional formatting is out the window). I'd like code which highlights the rest of the row, Z:FN, in a certain colour depending on the value in Y3:Y500.
Also, where there is data in the cells between Z:FN I'd like that to highlight in yet another contrasting colour.
Conditional Format Cell Based On Data From Another Cell
Nov 11, 2012Can I conditions format a cell based on data from another cell?
View 8 Replies View RelatedConditionally Format A Cell In A Grid Based On Other Cell
Sep 12, 2006way to conditionaly colour code all cells in a grid based on cells in other grid: i.e.
gridA
1 1 2
1 2 1
2 2 1
grid B
12 11 14
34 16 53
35 64 23
i want all cell in grid B to be red if the coresponding cell of GridA is 2.
so here "14" "16" "35" and "64" will be red!
Numeric Format Based On Cell Value
Nov 17, 2009I am stuck on this one. In the attachment I have values pulling into N3:N7 based on a drop down choice. Some of the numbers are numeric (no decimals), others are currency (no decimals), others are percentages (2 decimals), etc.
Is there a way to pull values I'm currently pulling into column N and have those values match the format of the source? I've tried converting it into TEXT but then I cannot place conditional formatting data bars on the values and have it work.
Return A Value Based On Cell Format
Aug 9, 2007I don't even know if this is possible but can you use some formula within Excel to return a value to a cell based on the cell formatting of another cell? Here is specifically what I am trying to do:
Cell A2 has a value of 10. If the font color of that cell is black (or "automatic") I want a formula in cell A1 that will return a value of "+10". If the font color of cell A2 is red, I want the formula in cell A1 to return a value of "-10".