I've used Conditional format before and up to now never had a problem with it. I would like that if a cell ends with a number it turns (eg) yellow. So Hallo1 remains colourless, but in the case of Hallo2 the cell turns yellow. I have tried (in the active cell A20) Right(a20,1)>1 (with the setting hasFormula) and =Right(a20,1)>1, both without the desired result.
View 2 RepliesI am using excel 2000. I want to apply conditional formatting to a range of cells if they contain (V) as part of the cell contents. The cells will generally look like this : 09.00-6 (V) or 9-5.30 (V). I want to shade any cell if part of the contents of that cell is (V).
View 2 Replies View RelatedWe have the following formula in our timesheets. Basically when we enter a Job number in one cell in say Tab1, it will return the matching project name in a different cell that we have next to the project number. The job number match is done in the tab named "ProjectSchedule", where all the details of the project are listed. We need to extend the match range to include another tab named "CustomSchedule", but I can't figure out how to make the first formula search jobs from both tabs.
Current working formula:
=IF(C7="","",INDEX(ProjectSchedule!$C$3:$C$202,MATCH(C7 & "*",ProjectSchedule!$B$3:$B$202,0)))
What I'm trying to accomplish, but it not working is something like this:
=IF(C7="","",INDEX(ProjectSchedule!$C$3:$C$202&CustomSchedule!$C$3:$C$202,MATCH(C7 & "*",ProjectSchedule!$B$3:$B$202&CustomSchedule!$B$3:$B$202,0)))
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I'm working on a report right now that I would like to identify incorrect phone numbers. So I'm looking to use the LEN function to identify and highlight any phone number that is incomplete (like missing area code). But I also don't want it to highlight if there is an "N/A" in the cell.
So I was using =LEN(A1:A100)<10 since 10 digits would be a complete phone number). But I don't know how to manipulate it to be if the cell is greater than 3, but less than 10.
I have a column in a sheet referencing data from a column in another sheet in my workbook. I want to apply conditional formatting on these numeric values, from red for lowest vals to green for highest. However the fact that my column is referencing cells that will not yet have data means that they are being pulled over as 0. I am not displaying zero values in cells but the zero vals are still being included in the conditional format. Is there any way to discount these zero vals?
View 2 Replies View RelatedCell D8 contains many different account codes. When entering into this sheet, if D8 is filled using account code 4010.12, 4010.17, or 1190.1000, then I want Cell J8 to turn a different color, flagging that cell so they know they have to fill that cell in J8, otherwise that cell will remain blank.
View 2 Replies View RelatedI am trying to conditionally format columns B:I so that when either "Closed" "Complete" are entered in G they all go grey
Also I want the cell in column I to go red when the date in there is equal to today or has gone past
I have got it to work using:
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedI wonder how to copy a conditional format from one cell to its current row.
I've attached an example (if B3 is green then I'd like its whole row turns green too).
I think there should be an "easy" way to turn the whole rows green, red or whatever color based on the B column formats (or colors)..........
I'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
View 4 Replies View RelatedLooking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.
This has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.
=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)
Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
View 8 Replies View RelatedI have a large spreadsheet with a number of columns that are set up for conditional formatting. For example a column of "BUY"'s and "SELL"'s where the "BUY"s are formatted with the default "light green fill, dark green text". I have other columns that are conditionally formatted using a formula. When I base the result on a formula I don't seem to have the option to use the default formats. Is it possible to use the defaults or maybe even how to customize my format to look like the default? It would look a lot better if I had a uniform red/green style throughout the sheet.
View 1 Replies View RelatedI have two cells. both formatted to contain dates.
cell a1 will have a date in it. cell a2 will have a date calculated to be cell a1 + 42 days.
now, when cell a2 reaches a date that is greater than cell a1 + 42 i want cell a2 to be formatted as fill red.
so, i have tried a conditional format as =a1+42 >=TODAY() but it always highlights as red even if the value in cell a2 is less than cell a1+42.
I want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
View 2 Replies View Relatedis there any way to set the conditional format to the colour of a particular cell if the condition is met?
View 9 Replies View RelatedI have set 3 conditional formatting rules where the row from column A to K will change depending on the value on column L.
Selection is equal to A3:K100, conditions are similar to:
- Formula is =$K3="PIP"
Then for formatting I chose WHITE BOLD FONT & BLUE SOLID PATTERN, for example.
Conditional formatting only allows 3 conditions. If this can be replicated
using VBA, then you can set "n" conditions, correct?
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedCan I conditions format a cell based on data from another cell?
View 8 Replies View RelatedAs a pert of a spreadsheet I have 2 columns (M5:N400) of 400 cells deep. Each cell in these columns contains a formula that counts days, when appropriate. They can end up showing a value of blank, a number between 0 and 5, or any number greater than 5. (But very rarely greater than 30)
If the number is greater than 5 then it means that it has exceeded it's target time and I wish to highlight this with conditional formatting (CF). I have a CF on all cells in both columns that says.
If "The cell value" is "Greater than" "5"... then
format the background colour to a pale yellow.
It works, but doesn't work.
If the cell value is 0 to 5 it's unchanged. Good.
If the cell value is >5 it changes. Good.
BUT, if the cell is blank it also changes. Bad!!!
I assume it is because it is looking at the fact that there is a formula in the cell, even though the displayed value is "". So I tried a second level saying that if the cell is equal to "" then no format, but it still changes.
Not very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
Calibration Record-example.xls
I am trying to conditionally format cells in column I (named range of ETID).
I want the cell to change shading if the cells do NOT meet this criteria:
Whole Number10 digitsstart with '0' or '1'I have this but it isn't working:
=AND(OR(LEFT($i2,1)="0",(LEFT($i2,1),1)="1"),OR(LEN($I2)<>10,($I2)<>""))
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedMy cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
I have a large spreadsheet that I would like to indicate the location of the cells (Change cell color or text color) which contain formulas. My thought is that conditional formatting would be the easiest way...
View 3 Replies View RelatedI need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies View Related