I have a macro that is starting to get pretty intensive and beyond my knowledge base. Currently is takes the needed data from sheet(1) and copies it to a newly created "Sheet2" in a specific format. Once the macro is done formatting "Sheet2", it shows both userforms for the next part of this macro.
One userform (UserForm1) is for inputting barcode data into rows on "Sheet2" (this is where I am running into problems). I cannot get the userform to capture the captions to the needed cells in "Sheet2".
The other userform (UserForm2) is for a visual representation of the error check. This will check for differences in Sheet2's column data. If a row's data in Sheet2 doesn't duplicate as expected it will flag RED and an image to show in the associated frame in UseForm2.
UserForm1:
Plate ID (PlateIDLabel goes to "PCR Plate ID" header column in Sheet2)
Plate Location (PlateLocationLabel goes to "PCRLocation" header column in Sheet2)
Currently the userform is coded to recognize prefixes for correct input into label textboxes.
i have used two form and a macro in a workbook. First one captures data via text box. This data is captured in a cell. Form two adds a new sheet with the name that is captured in a cell, then perforns some task in the newly created sheet. Macro does the formatting of the newly created sheet and saves the sheet. Again when i reopen the the workbook the value is captured in next blank cell and the procedure follows. This works fine as far as there is a single. But not in case of multiple user at the same time. Is there a way to directly capture the value to form 2 and macro so that multiple user can work on the same time.
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567 row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789 row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765 row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321 row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I run a golf handicapping system that utilises excel quite heavily to record a LOT data over the course of a season. In essence we have in excess of 50 players who play once or twice a week and I record their Stableford scores (dont worry that's a golfing phrase but it is basically how they performed that day) and adjust their golf handicap accordingly - all in XL.
So - a player may start the season with handicap of 20 but over the season this will vary up and down as each score is recorded. A player may well play in excess of 50 rounds in a season.
I currently record the player's starting handicap in one column and in the next column appears the freshly calculated new handicap after a new score has been entered. The column containing the new handicap overwrites the old handicap value each time it is recalculated.
All I want to do is to create a 3rd column that records the lowest handicap value attained during the season. So for each player I guess it should take the newly calculated handicap and decide if it is lowest it has 'seen' in that column and if it is record it.
I found a useful thread Creating UserForm Controls via Code. how to create dynamically scalable UserForms at run time. I'm now stuck on the obvious Part 2 that isn't included...How does one capture the values in the text fields without knowing the names of those fields. My initial thought is to use a For loop to read the values into an array, like so...
Dim ReadArray (TextFieldCount) For k = 1 To TextFieldCount ReadArray(k) = ????????? Next k
If it were a simple read from a text field I'd use something like: Set ReadField = TextBox1.Value
find the attached file. Book 2 there is 4 columns ie,reg no,fleet no,product & model and on book 1 there is fleet no,reg no and model and what i need is to capture fleet no & model from Book 1.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet
I have used a database template from this site and changed it to suit my needs but I have a bit of a problem with some of the code. I know how to update the worksheet with the relevant userform text fields and in another project I did I have successfully sent userform text fields in the body of an email.
For this project I want to update the worksheet AND send an email at the same time. However, using the two pieces of code together is causing an error that I can't seem to solve (using my very limited vba knowledge!). The code I am working on is below and I have highlighted the line that is getting the error message. C
VB: Private Sub cmdSubmit_Click() 'Submit new record Dim ws As Worksheet, lRow As Long, Str As String [code]....
I have a Userform which has 3 'CONFIRM' buttons to pass the data from userform textbox 'ActDate1' (and 2 &3) to the worksheet 'Mod Schedule'.
In Column B from Row 7 onwards is a list of Names - one of these names will have been in the userform combobox 'SlctStu'.
I need vba such that when I click CONFIRM, on ActDate1, this value passes to:
The cell which is offset from the cell which has the matching name from combobox 'SlctStu' in the userform by the following formula:
((ModSend - 1) * 3) + 1
where ModSend is a variable set by my userform Me.Modsend.Value (a combobox).
So, for example, if the ModSend value is 3 and the name "Chuck Norris" is in the combobox 'SlctStu' in my UserForm, when I hit CONFIRM for ActDate1, I want ActDate 1 to go to the same row on sheet 'Mod Schedule' in column B from row 7 onwards where this name "Chuck Norris" also appears (a dynamic named range called 'StuModList' contains all the names that can appear here) and then offset across the worksheet by ((3 - 1) * 3) + 1 = 7 cells
I am trying to create a User Form to make data input easer for the users.
At this point, I am having trouble figuring out how to “place the data”.
My workbook has categories in which data is organized. For instance A10 might say “Toyota” and B11 would be Corolla than all of row 11 will have data supporting the Corolla.
Same for the “Dodge” category, only it starts at A60 and B61 would be something like Challenger, etc.
I have a code to place the data in the first empty row but this doesn’t work very well for me.
I will have a drop down list of all the categories in the User Form which the user will select. From this is there a way to search for that category and then find the first empty row or insert a row within that category and then the rest of the data can follow?
In the code below, all I'm trying to do is get the next record from the userform to go to the next row in the worksheet and so on. I looked through some of the threads and even tried (as underlined) but I just can't seem to get it to work.
Private Sub TEST_Click() Dim lRow As Long Dim ws As Worksheet Set ws = Worksheets("Sheet1") 'Prompt user before adding record MsgBox "Are you sure you want to Add record?", vbOKOnly, Verify
'Add data to worksheet ActiveCell. Offset(0, 0) = txtFruit.Value ActiveCell.Offset(0, 1) = txtFruit_Number.Value ActiveCell.Offset(0, 2) = txtFruit_Color.Value
I have a userform that has 1 combobox and 2 text boxes. i need the two text boxes to go to specific row and a specific column based on the entry placed in the combobox.
I can move data from a userform to a database if i am adding it to the next row, but here, there already is data and i want to add to existing data.
I tried application.match, to find the text in the combobox, but i can't seem to figure out the syntax to add it to column 13 on the same row.
I have setup a userform to record fuel issued to vehicles. I have a text box which I would like to use to display the last meter reading from my fuel pump. This data is stored in the last cell in column F of "Sheet1" workbook. Is it possible to read this data into my userform so when it starts it displays the last pump reading?
I have two userforms (for simplicity we'll call them UserForm1 and UserForm2). When pulling up data on UserForm1 and selecting CommandButton1 is Unloads the current form and passes the ComboBox1 on the form to a public variable called lSection_Choice. When CommandButton1 on UserForm2 is selected, it uses the public variable lSection_Choice to determine the ListObject on a worksheet and then locate the last row in the first column of the listobject and input the value of the TextBox1 on UserForm2. It runs through without any errors but the worksheets do not update? I am guessing it's because the modal UserForm2 is set and not focused on the worksheet.
Here is the code to pass the public variable
Code: Private Sub AddTeam_Click() lSection_Choice = Me.ComboBox1.Value Unload Me
I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”. The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.
Private Sub CmndInput_Click() Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("Facilities")
' find first empty row in database iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'check for a Facility If Trim(Me.TextFacility.Value) = "" Then Me.TextFacility.SetFocus MsgBox "Please enter a Facility" Exit Sub End If
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are A C E Part Price Vendor
I have a UserForm with two ComboBox's (name ComboBox1 and ComboBox2) and a ListBox (name ListBox1).
In UserFrom "ComboBox1" shows two options of months "January" and "February". And ComboBox2 shows options "Advertising", "Bills", "Daily Expenses"
I have some Data on my Excel Sheet. I want to pull that Data and show it in UserForm according to their Month in which they are incurred. For Example If from Userform "January" month is selected and "Advertising" is selected then it should show data in the ListBox1 as follow.
Code: Dim c_data As Worksheet Dim usrfrm1 As UserForm Set c_data = Workbooks(txtdbname2).Worksheets("CONTROL_1")
[Code]....
I have a userform in a workbook (part2.xls). Data from a second open workbook (defined as c_data) is tallied (countifs) and then dropped in the respective textboxes on the userform (cnthpdia, cnthfld, cnhpcrt). These textboxes have their visibility properties set to FALSE.
I need to turn them on to have the data displayed.
I am receiving a "Variable not defined." error in the line highlighted above.
I have a spreadsheet that summarizes variations on a project. On the "Variations" tab a userform pops up that asks the user to select from 3 options:
1. Create new variation This launches another userform that allows the user to enter the necessary information and create a variation sheet. This userform updates "VarSummary" and also creates a new sheet for each variation created. I have been able to do all of this so far. The summary sheet "Variations" tab uses the data on the "VarSummary" tab. This is the code I used to add variation
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("VarSummary") With ws iRow = . Cells(.Rows.Count, 2).End(xlUp).Offset(1, 0).Row 'Copy the data to the database .Cells(iRow, 1).Value = Me.txtVarRecNo.Value .Cells(iRow, 2).Value = Me.txtDate.Value .Cells(iRow, 3).Value = Me.txtChg.Value .Cells(iRow, 4).Value = Me.txtSrcRef.Value .Cells(iRow, 5).Value = Me.cbstatus.Value .Cells(iRow, 6).Value = Me.DirQty.Value .Cells(iRow, 7).Value = Me.DirVal.Value............................
I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?
I have a database in Sheet1, and need to make a drop-down list for each column title, so that it would filter out the necessary letters or words. E.g. I type "au" and see the words starting "au" in one single list (like aura, aubergine, etc..)
I'm trying to set up a relatively simple UserForm, which will collect the name of a project from a ListBox, a project update which will simply be text entered into a TextBox, and a estimated completion percentage (factor of 10, 10/20/30% and so on) which will come from another ListBox.
I've managed to get many of the basics working, for example an OK button and a CANCEL button, but there are a few bits that I'm still finding rather tricky.
I have the selected date in the percentage listbox going back into my chosen place in the spreadsheet quite happily, but I can't get it to work for the project name listbox (I think it's because the options come from rowsource and weren't entered manually like the other one). I'll paste my code at the end so you can all see how I've done it (and have a laugh)!
I have also just about managed to get the data to go to the right place in the spreadsheet. I want the data to appear in columns, column 1 for the project name, project update in 2 and percentage complete in 3. I have this working, but it for any reason one cell becomes blank, my code uses that cell, and that could cause entries to become mixed up. I want the UserForm to enter data on the first entirely empty row.
Here's my code:
VB: Private Sub Cancel_Click() Unload ProjectUpdate End Sub
Private Sub Clear_Click() Call UserForm_Initialize End Sub
I'm a little out of my element(normally program PLC's). I have always been lucky on searching others programs and have been real successful at piecing them together to fit the application I needed. The current workbook I am working on for my supervisor will allow him to keep track of personnel's weekly job assignments. The workbook and userform work fine when just using one worksheet.
What i would like to be able to do is use the "assigned to" combobox be the indicator as to which worksheet the data is saved to. I have tried to do it several different ways but have been un-successful. Have spent the last two days reading and searching for a solution but have yet to find or understand one.
I am having some difficulties with my VBA code. It is a user form that prints the data entered on to a worksheet. However, I am having some troubles with the calculations I want it do. Here is code...
PHP Code:
Private Sub CommandButtonExit_Click() Unload Me End Sub
Private Sub CommandButtonClear_Click() Dim ctl As Control
I was given a task to build a userform and all the info collected from the userform will then transfer to a worksheet named 'Promotion'. I was copying the code from last year's UserForm and with my 0 VBA background.
With the below code (I just extract part of it), the ideal case would be to transfer data to Cell A4 (which is the first blank cell on the worksheet), and when a second form is recored, it will start from A5, so on and so forth. But somehow, the code transfer the data to Cell A1001, and the columns don't match with the info either.
Private Sub cmdAddPromo_Click() Dim RowCount As Long Dim r As Long Const LastRow = 2000
[Code]...
The other thing is I don't really know why there is 'Me.' before each common buttons...
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
