I need a formula that will look for a name in column "A" and if it find that name it should average the numbers in column "E" to "I". So if TEST ONE is found in A5 then average E5:I5.
View 3 RepliesWe are trying to track the average star values of reviews posted to our clients accounts. Here is an example of the spreadsheet we have set up:
Company Name
Review 1
Review 2
Review 3
Review 4
Review 5
Company 1
[CTY] 4 Stars review content
[ISP] 5 stars review content
[GGL] 4 stars review content
[CTY] 3 stars review content
[YELP]5stars review content
In this example, we use the initial [ ] to track which site the review was posted on ex: [CTY] means city search, [GGL] means google, etc.
We want to be able to track the average star value on each site. So the formula for City Search would scroll across the row of reviews, pick out reviews 1 and 4 and then find the first number in each and average them. The result in this case would be 3.5
From the research we have done so far, this looks like it will require a complex array formula. How to make this formula? Is this even possible what we are trying to do?
I need to find the cells that are greater than 48 and then find the average of this number.
Is there a formula that could put this together?
Average if greater than 48.xlsx
I am trying to calculate the average of the absolute values of a range of visible cells. I use filters to extract the data rows I need from a large spreadsheet. Then I need to calculate statistics on the resulting data, i.e. the visible cells. The line I am using to calculate this is:
VB:
ThisWorkbook.Sheets("Tracker Channel Stats").Cells(newRow, 4).Value = WorksheetFunction.Average(Abs(R.SpecialCells(xlCellTypeVisible)))
However, what I get back is simply the value of the first visible cell in the range, i.e. the average of the absolute value of one number is that number. how to make this work
I'd like to search for a specific value like (1) in an array of cells like (A:A). The result needs to be the average number of a different column (B:B) in the same row as the searched value (1). And the resulting number should be rounded up to the nearest 10.
Example below: (Find value = 1 in A:A) ... 1 is found 4 times.
A | B
1 | 295
3 | 123
1 | 400
5 | 425
1 | 354
1 | 400
In the example above there are 4 (1's) found. By adding all the values in column (B) of the same row, we get 295+400+354+400 = 1449, dividing that in 4, the average is 362.25, rounding that up to the nearest 10... THE RESULT I'M LOOKING FOR IS: 370
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
I have a grade system where I need to obtain an "Average" of grade data within four cells. At time there may onlt be two cells with a value or three. Example: The cell cell cantain a value of 100 points with the totral of 400 point. AS we know the "Average" would be 100 points. But is only two cells cantained 100 point and the other two where empty then the "Average" come back as 50 points. Because I have 4 cells that requires a value input. So my question is how do I create a formula that will give the correct value for the "Average" of data that is placed in the cells. The values are calculated as a total from the grades entered. That total is in F14, F31, F48, F65 - Now if F14 has a value of 100, and F31 has a value of 100 then the "Average" should be 100, but it is not for the is calculating F48, and F65 as 4 values, so the return is 50. The situtation is that I need all the cells for in some cases data will be necessary, but I need the "average" to be calcalated for only the values entered.
Where is the Formula.
=IF(SUM(F14,F31,F48,F65)=0,0,AVERAGE(F14,F31,F48,F65)) - My brain says this is simple but no matter what I do it returns 50.
There are words in a cell and to its right is a number.
I have a name in P5. I need a formula in Q5 to add all the numbers
next to the same name in Range B4:O46.
Michael
Is it possible to show "0" zero in the total average column without inputing zeros in the blank cells in row B3:E3 & B4:E4? There are months we receive no boat & RV orders, so those months wll be zero most of the time. Instead of having #DIV/0! it show 0, without having to input zero in cells to compute the average.
A
B
C
D
E
F
1
Jan
Feb
Mar
April
Total Average
[Code] .......
Here is the formula I am using however it interprets the blank cells as 0% and includes it in the average. To make it more difficult there will be some 0%'s.
View 4 Replies View RelatedI need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
how to find out blank cells and also I want to delete the blank cells.
View 9 Replies View Relatedtrying to put a formula in to find the true value of cells, i.e.
need the positive value of these cells (into one cell), note below, assume colume A1-A6.
FALSE
FALSE
FALSE
35
FALSE
FALSE
I have following table,
Item NoSectorDestination
12346589BOM-DXBN/A
12346589DXB-FRAFRA
12346589FRA-DXBN/A
12346589DXB-BOMN/A
87665976NAG-BOMN/A
87665976BOM-DXBN/A
87665976DXB-PARPAR
87665976PAR-DXBN/A
87665976DXB-BOMN/A
87665976BOM-NAGN/A
Row 2 to 5 are of same item no. The result that is required is in Column C. The formula to check same item numbers in column A and give the result as "FRA" in column C3 with C2, C4, C5 showing as not applicable. Similarly for the next item no
I have a spreadsheet with a number of different formulae on it. I have a macro which I want to extract which cells are referenced in the formula in the active cell and then branch based on the which cell is referenced.
Is there a way to find the referenced cells without parsing the formula string?
I am making a form with drop down boxes and auto fill to make things easier. I have one Box for the Company selection another box for the occupation selection and I need a formula to find a $ value based on the selections made in these two cells. If I could establish the actual cell reference of the selected data in the second drop down list. The data will be much larger than this example and will live on a separate sheet.
View 2 Replies View Relatedi have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....
I have a list of Names that has numbers accumulated over months. I am looking for a formula to use in a search tool that uses a drop down list to identify the name I am looking for and then the formula will show me the increase that happened in certain months.
See the attachment the result is coming from Denominators tab, I want the answer displayed in the Display tab, you will see a drop down list at C3 in Display, I am trying to show the answer in cell D9-I9.
how many the denominator has increased in that month. so for D9 it will come from denominator tab column c minus b, E9 will be d minus c
I have 3 excel sheets (A,B and C) linked to a master sheet (X). In each sheet (A,B and C), people enter unique idetifier in first column, its type (mr, ab, J) in the second column, start date in the third column and finish date in the fourth column. At the end of every week, i subtract each start date from the finish date and get the number of days spent for each unique idetifier (column N). I preiously posted a thread (Calculate difference between dates excluding weekends) to inquire about how to calculate the difference between finish date and start date and exclude the weekends. I received some nice solutions, but none has worked as the start date cane be weekend as well.
My second and major query is once i have the difference in weekedays for each unique identifier in all the three sheets, I want to calcuate the average of each identifier type (mr, ab and J) in the master sheet. In the master sheet, i have used sumproduct to calculate the average of each idetifier type from column N for each sheet. That means i have a column for A sheet, subdivided into three types, which include the average. I am using sumproduct for this. Once this is done for each sheet type, i need a final colum in the master sheet that calculates average of all mr from A, B and C together, and similarly for ab and J. The problem here is if i combine all the sumproduct formula, i am not gettng the right answer.
My formula looks like SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40)) for all mr in sheet A. I then divide this by SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40<>"")) to get the average of all mrs in sheet A. I do the same for sheet B and sheet C for all three identifier types. Now i want to combine the formula for all sheets together under mr, Ab and J. I thought the following should work ((SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40))+(SUMPRODUCT((SheetB!$E$5:$E$40="mr")*(She etB!$M$5:$M$40))+(SUMPRODUCT((SheetC!$E$5:$E$40="mr")*(SheetC!$M$5:$M$40)))/((SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40<>""))+((SUMPRODUCT((SheetB!$E$5:$E$40="mr") *(SheetB!$M$5:$M$40<>""))+((SUMPRODUCT((SheetC!$E$5:$E$40="mr")*(SheetC!$M$5:$M$40<>""))).....
But this is giving me wrong value. It is working fine when done for individual sheets, but when combined for all three sheets together, the value is wrong.
Column B: The day of the week that the date is, Sunday, Monday, etc.
Column C: Every date in 2008
Column D: my data (the number to be averaged)
What I need the formula to do:
Look in Column B for every instance of "Sunday", and count them up (they count only if the data in column D is not 0) and use that number to average the number in column D
So if I have 52 Sundays and we are only 4 weeks into the year and the 4 data points are 50, 100, 75, 25. The average will be 62.5 instead of 4.8 (divided by 52).
I am trying to figure out how to take the average of the last 4 "non-zero" numbers in a series of values.
The sheet looks something like this, numbers are all in one row:
7 , 7 , 7 , 7 , Total = 28 , 8 , 8 , 8 , 8 , Total = 32 , 0 , 0 , 0 , 0 , Total = 0 , 8 , 8 , 8 , 8 , Total = 32 , 7 , 7 , 7 , 7 , Total = 28 , 8 , 8 , 8 , 8 , Total = 32 , 0 , 0 , 0 , 0 , Total = 0 , 8 , 8 , 8 , 8 , Total = 32
I'm looking for a formula that will look at all the last few totals (starting from the end) and take an average of the last 4 totals that were > 0. In this case it would average {32, 32, 28, 32} ignoring the 0 total.
Attached Dummy file. I would like to be able to get the average time spent on a process for the day recorded on the "Results" tab. I have posted the answers it should be on the Results tab, which was done manually. I would like the file to do it on it's own. On the individual's tab, the time and instances will be recorded for each job. I believe I am close, and the only thing I need is the Results page to be able to return the desired results. Ranges varies day-to-day, and I think (maybe), I can figure out the dynamic range settings.
I would like to avoid creating a helper column for each set, because then I would be dependent on the person expanding on this. I am also avoiding Pivot Tables, I understand it, but not the ones that needs it. This will have about 15 tabs for employees, and could be possible that more or less will happen, depending on workload. This will continue to be manual for now.
I have a total in F16 that i need to find an average of.
The range is set from f4 - f15 (12 months) and need to find the running average per month. but as we only have done 5 months of the year so far that is the only average required (F16/5).
I need this to count at the end of june (F16/6) basically not counting any zero months (jul, aug, sept etc until the end of each)
I am just looking for an function which will gives me the average of the hours worked on daily basis. A breif descripiton is i have an workbook in sheet1 i have the sample report which i struggle to prepare on daily basis for each client.
Sheet2 i have the Raw data in column H i have the client name and then in column I is Date and finally in J the hours we worked on in it. To say i just want the average if the each client on the particular date as shown in Report sheet.
I want to find the average of a range.
I've put the range in order and I want to take off the top 7.5% and the bottom 7.5%. Then find the average of the data that is left. (the middle 85%)
Can I do this with a formula?
I want to find incremental average
My cell numbers are
AG4
AG4,AG13
AG4,AG13,AG22
AG4,AG13,AG22,AG31
and so on..
(In incremental of 9)
I have the following Data:
Full Drum
247
Full Drum
247
Full Drum
261
Full Drum
261
[code]....
I need to know how to find the best combination of combining these drums to get the highest average from each combination. Each combo will have 3 drums except for one which will have two and a half.