I am having trouble figuring out a way to get around this situation:
I have a to find the minimum in a range. I have used =Min(range)
However, i wish to exclude 0 values and n/a errors in the case no data figure in one or more cells of the range.
Could you please help me figure out a way?
I'd like to calculate the standard deviation and mean of a whole load of data. Unfortunately it has some errors, FALSE values, blank cells and zeroes I'd like to exclude. Calculating the average is no problem as the AVERAGEIF function works fine, but there is no equivalent for STDEV. The (array) formula
STDEV(IFERROR(E29:E32,FALSE))
ignores the cells with errors and calculates the SD, and the (array) formula
STDEV(IF(E29:E32>0,E29:E32,FALSE))
ignores the cells with a value of 0 in them and calculates SD.
How can I combine the two into one formula?
I am attempting to count how many cells have different values in a table while not counting the N/A's and 0's found in the table. From what I'm finding online, I see lots of formulas set up with frequency functions, but none of them are set up to exclude anything - just find unique values. I need to count the cells with values other than 0 and N/A going across each row and not count the same value twice
Here's an example of what the table looks like (the real one is over 1,000 rows and 50 columns) with column C being where the formula needs to go. I put what I would like to have returned in the cells.
C
D
E
F
G
H
5
2
N/A
N/A
0
43263526AF
324GFDS
[Code] ........
I have a list generator that creates a set of data in a multi-column & row dataset. I would like a formula to create a list of the alpha data points only which excludes blanks and any errors.
Example:
AADD
#N/A
BB23EEFF
#N/A
#N/A12GG
CC
Results:
AA
BB
CC
DD
EE
FF
GG
I need a formula that will check a few things and if it finds an error the word error will appear in the cell, the details of which are in the attached spreadsheet.
I have worked on this a great deal and cannot seem to make a formula with the proper logic. There is a sample of an error in the spreadsheet.
My code here searches for a number from my (mActiveSheet) to see if it matches any number on my "Finanace" sheet. With this code, if the number on my (mActiveSheet) isnt on my " Finanace" sheet, then the proram gets a run time error 91. It happens when my SSRmatch is empty, and it blows up at the line of: If SSRmatch = SSRR, b/c my SSRmatch does not have anything in it. Can anyone help by not having it to blow up, and just move on to my code where if my SSRmatch is nothing?
Do Until z = LastRow
If SSRR "" Then
Sheets("Finanace").Select
Dim SSRmatch As Range
Set SSRmatch = Range("B5:B100").Find(What:=SSRR, After:=Cells(50, 2), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
'I have everything I need when it is equal to true:
If SSRmatch = SSRR Then
I am writing a macro that will find several different values in sheet1 and replace them with values from a table in sheet2. It currently does exactly that but I realized that there are instances when replacing hyphens isn't appropriate and will ruin the upload of my data. I need to replace it in the rest of the columns though. The headers will always be the same, such as "MST" , so I could use that as a conditional statement I just don't know how to go about it with the replace function.
Code:
Sub FindAndReplace()
Dim LastRow As Integer
Dim i As Integer 'Counter to loop through all the rows found in the table
'Finds the last row used in my replacement table and sets that as the searchable range
LastRow = Sheets("Sheet2").Cells.Find(What:="*", SearchOrder:=xlRows, SearchDirection:=xlPrevious,
[Code] ..........
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View 4 Replies View RelatedI have two lists of data as below, and I want to find a match after excluding "Ltd" or "Limited"
example
If Cell A1 is "ABC Limited", and Cell B1 is "ABC Ltd"
This should show as a "match", otherwise it should show error.
I have a colomn with numers and text. I would like to get an average of the numbers in the column, but using average (A1:A10) gives me #N/A as some of the cells contain #N/A.
So wondering if there is an AverageIF function in excel that I can use to write something which only averages IF it is a number.
Sounds very basic but I could not find anything through search.
Heres the code:
I'm having trouble with the With statement near the bottom for the active sheet, effectively the row search. (Would be great if the font can be changed to red as well as text "Withdrawn").
Option Explicit
Private Sub CommandButton1_Click()
Dim search As String 'stringy
Dim ws As Worksheet 'worksheety
Dim Answer As String 'answery
Dim r As Range 'rangey
search = Range("b7").Text 'texty
Dim cell As Range
cell = Range("4:10")
Application.EnableEvents = True
[Code] .......
I have named/(grouped?) a column (J) "DeltaNet". I want J2 to sum everything below (excluding the "Net" Header). I tried =sum(DeltaNet) but get a circular error. I'm also trying to get cell A1 to do a =countA for all below it.
Sample: Count Formula
Sum formula
Ticket
Date
carrier
CarrierID
Product
Net
12345
6/1/13
UP
CEFX123456
CoarseFaction
114.35
Previous question regarding dynamic ranges within a table to create a dynamic chart.
I've now come across another issue regarding the same table but creating a new graph to display a new graph. This time, I need the graph to only include labels with data in them.
The data is based on months including achieved targets and forecasted targets. I need to show a graph for the achieved targets to date and exclude any future months from the graph. e.g. For this month, I would only want to show January to July values and not include August to December.
How easy is this to do? I don't know how to use the OFFSET function but think that this might be a possible solution.
Project: x
Activity: xActifity TypeReference FormDec-11Jan-12Mar-12Apr-12May-12Feb-12Mar-12W/EW/EW/E2-Mar9-Mar16-Mar23-Mar30-Mar6-Apr13-Apr20-Apr27-Apr4-May11-May18-May25-May77%91%91%R/S95%100%100%R/S100%100%100%100%MMMM100%71%71%R/S100%100%R/SMMMM97%81%100%R/S100%MM100%R/S75%85%R/SR/SMM100%100%96%Average
Basically what I want to achieve is the average % of Dec 11 (D11:D22 on the sheet im working on) scores but excluding any blank fields (not excluding potential scores of 0%)
I need to count a column of text excluding duplicates, but only if they are duplicates of the cell directly above them in the column. Example:
a
b
c
c
d
d
a
b
I want this to return 6 instead of 4. Is this possible?
I want to count the number of cells in column C with one forumla that answers the question, "How many of the cells in column C contain the words, APM, BPPM, CAPM, and NMS while exluding any results that have "OUTLOOK" in Column K?
View 2 Replies View RelatedI know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I am trying to use some vba match function code to return the column number of the matching date. The date will be stored in a date variable.
Every time I run this code I normally get a match error even though the date is in the worksheet and the variable matches that date.
See below:
[Code] .....
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View Related1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.