I simply need to "break down" the numbers from the first box. The problem is that the distributional data (A, B, C) are not always the same. One day there might me 10 A's, another day 2, etc...
View 5 RepliesI do not have any code for this as I am unsure if it is possible. I have a list of range names in a column (A) that refer to different sheets and in an adjacent column (B) I have a list of data. Is it possible to write VBA code that will allow me to copy each value in column B to the corresponding cell in the workbook that relates to the range name in column A.
View 2 Replies View RelatedI have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
I have a monthly report showing actuals and budget for current month (or quarter) and year to date. Range names have been created for (1) each month, (2) each quarter and (3) year to date). I'm using the SUMPRODUCT function to extract information by account. For example:
=SUMPRODUCT(($A9=ACT_Account)*(ACT_Jan))
This formula works except I have to replace the "ACT_Jan" each month accordingly. Can a data validation list be created with the range names so that updating this formula monthly can be simplified? For example, changing "ACT_Jan" to "ACT_Feb" with a drop down list.
I am trying to make a simple planning sheet.
I have a workbook with 2 sheets.
1.sheet contains Columns : DayDateTimeClassTeacherCovered
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1
Harley
Lidia
Livia
Thais
Salete
Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
I'm trying to figure out a formula to that will pull the newest data from a list. So say I have a list A2:A20. Each week a new number will be entered into the next cell (in this case A21) making the list longer. Is there a formula or some script that will allow me to do this? I have tried a few different things and cant seem to figure it out
View 4 Replies View RelatedI have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I'd like to create a list via Data validation-list. Anyone knows how to reference a range on another sheet of the workbook?
The range is =$Q$5:$Q$13
Is it possible to reference another sheet? If yes, how is is done?
I am using following code to apply data validation list. However this code gives error Intermittently. The error message is 'Application defined or Object defined error'. Also this code looks little cumber some. Will really apprciate if any one can put some ligh on why is this error appearing sometimes. Do I need to change something in the code or add few extra lines. I feel following points will be necessary when you check my code
1. The data of validation list is stored under the column heading 'Reported_By_List'
2. Validation is applied on the range under the column heading 'Reported Through'
3. Start and last Cell Address Of the cells of the column in which data of validation list is
stored are extracted into the variables 'StartCellAddress1' & 'LastCellAddress1 '
4. Start and last Cell Address Of the cells of the column on which data validation will be
applied are stored are extracted into the variables 'StartCellAddress2' &
'LastCellAddres2'
Sub Validation1()
Dim wsName As String
Dim RValue As String
Dim WorkBookName As String
Dim StartRow As Integer
Dim StartColumn As Integer
Dim LastRow As Integer
Dim CellAddress As String
Dim ColumnAddress As String
Application. ScreenUpdating = False
WorkBookName = ThisWorkbook.Name
wsName = ActiveSheet.Name...........
I know how to turn the autocomplete on and off but I don´t have a clue where I configure the data range or the cells to display the list when the combo box is clicked.
I am assuming that this is done in the Edit mode at "linkedCell" and LisfFillRange ... yet I can´t get this to work.
I have a range called List that has 3 columns of data:
Corporate Human Resources Services PMA
Corporate Procurement Director
Ops Central Customer Services Lost Property Office
Ops Travel Information Travel Info Call Ctr
Ops Travel Information Centres Travel Info Centres
I have 3 columns on the entry sheet called Business Unit (Col A), Department(Col B) and Sub-Department (Col C). I want to limit the choice in column B to based on the selection in Column A in the form of a drop-down list e.g choosing Corporate gives a list of Human Resources Services; Procurement.
I am using the list option for field validation and the following formula in cell B2: =INDIRECT(VLOOKUP(A2,List,2,0)). I'm not sure what I'm doing wrong as I don't get a list of options just a blank cell. Do I need to use a different formula other than VLOOKUP..?
I have a spreadsheet listing various pieces of computer hardware, software and mobile accessories, etc with costs attached.
I have created a dropdown list of staff profiles eg a sales representative, finance assistant, IT administrator.
What I want to do is get Excel to pull the data through from the data sheet, to a printable summary output form (something you could also cut and paste from). For example, a sale rep would need to be set up with a laptop, laptop case, mobile phone, etc, so when you select Sales rep from droplist, I want that action to pull all the associated data through to the summary form. Similarly, a Finance assistant would require different kit , perhaps a desktop PC , monitor , etc.
Next to my data I have created columns with "Y" for yes in cells containing kit that match the staff role requirements, but I am not sure of the best way to pull this together.
[URL]
You can download the excel from the above link.
This excel includes some text data, in each cell there is an email address along with additional text. I only want to get the email addresses from the entire data.
I have a list of rules on how to group account numbers. An example is below. I have a very long list of full account numbers (no wildcards). There are roughly 75 rules on how to group the over 40,000 accounts. I want to use the vlookup to determine what group each full account number (always 11 characters) would belong to? It seems that the vlookup isn't treating the ?'s as wildcards. I can use the full account number rules with the wildcards in the cell in the sumif function though.
So ultimately I would like to have my list of account numbers like 40000000000 and 40000000001 know that they belong in group 1 based on the rule table below.
Full Account Number
Account
Subaccount
Group
[code]....
I have a list generator that creates a set of data in a multi-column & row dataset. I would like a formula to create a list of the alpha data points only which excludes blanks and any errors.
Example:
AADD
#N/A
BB23EEFF
#N/A
#N/A12GG
CC
Results:
AA
BB
CC
DD
EE
FF
GG
Make a Data Validation dropdown list that also enters a range for cells, for example:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
Lounge ¦ Low ¦ Large ¦ Easy ¦ Blank ¦ 0 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 month
Bedroom ¦ Low ¦ Large 100 ¦ Easy ¦ Blank ¦ 1-3 ¦ Daily ¦ 1-3 ¦ Low ¦ >1 year
Bathroom ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 0 ¦ Weekly ¦ 1-6 ¦ Low ¦ <1 year
I can make a dropdown list for:
Kitchen
Lounge
Bedroom
Bathroom
But if I select "Kitchen" I would like it to enter the rest of the cells in that row:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
The total number of rows I use is 10, and the number of items in the dropdown list will be 30.
The data in the cells 2 to 10 does not change from that first set to its data menu name.
if there was a way to automatically add each student to a class list as their information is inputted. What i mean is, after input Sally Student in the main enrollment list she would automatically go to the class list for the class she has chosen.
I have attached a sample workbook with my desired results. Basically what i want to do is make this easier for those in charge to get the class lists from the main list without having to copy and past all the time.
The class lists are in the tabs in the workbook.
how i can select the most recent 10 cells from a list of data to be included in a formula. I have selected it manually, for example F122:F131. This is fine but i don't know how i can put it so that it will update to the 10 most recent results when i input another line of data. So when i put in more data it stays on the previously selected. I want it to move shift down to include the new data but only the 10 most recent.
View 5 Replies View RelatedI have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q
R
S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
I have a complicated situation with Excel since I need a formula that can SUM data from the Pull 1 worksheet into the summary Sheet. I attached my sample for your reference because it is a bit complicated therefore I can not explain. It is better if you look at my Summary Sheet, need formula that can retrieve the same information.
Formula Test.xlsx
Please refer to attached sheet.
I have number 10000 to 10200 in column D.
I need to use IF Statement and add corresponding number in Column A as follows.
IF D2 = 10000,10006,10012,10018,10024 and so on then A2=20002
IF D2 = 10002,10008,10014,10020,10026 and so on then A2=20003
IF D2 = 10004,10010,10016,10022,10028 and so on then A2=20004
(Basically there is increment of 6)
Once i have formula for A2 then i can copy down the column.
Book1.xlsx‎
If I have a range say A1:A9 and cells A1, A2 and A5 have values in them and the rest are blank.
I want a formula that will give me the cell reference of the LAST cell in that range from left to right. ie. in this example cell A5.
I have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:
=IF('4. NORMALITY ASSESSMENT'!AC55>'4. NORMALITY ASSESSMENT'!AA55,"YES", "NO")
Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.
I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
I have a time entry spreadsheet where I total hours worked based on the time code entered in the cell next to the hours. I use a formula such as the following: =SUMIF(F11:AS19,"=AN",E11:AR19) which checks cells F11 thru AS19 for the timecode AN and when found, takes the hours in the cell before the code and adds them to the totals way off to the right.
The problem is that when someone does a cut and paste to the time data within the range of F11:AS19 and pastes it somewhere else, like to the next employees data (no formulas are being cut and pasted, just the detail data), the formula for that new line automatically changes to exclude the cells that were pasted over. It is as if Excel thinks that you pasted over that data so it is no longer of interest to you.
It is odd because you can cut and paste smaller ranges within that range with no effect to the formula but if you include the first column or the last column of the range in your cut, then the formula gets altered. If you cut and paste the entire range, the formulas all change to #REF!
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedI am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I have attached a sample of the issue. The formula is found in cell B49. If I enter a gravity of 2.76 or higher in cell B47 I get #N/A in cell B49. Why will it not read any farther over than 2.75. I have been starring at this for awhile now. I might look pretty dumb after someone else looks at it.
View 2 Replies View RelatedI have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.