If I have a range say A1:A9 and cells A1, A2 and A5 have values in them and the rest are blank.
I want a formula that will give me the cell reference of the LAST cell in that range from left to right. ie. in this example cell A5.
I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:
Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.
A1
B1
C1
10:00-20:00
08:00-17:00
12:15-21:15
13:45-22:45
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
I am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
View 9 Replies View RelatedPlease refer to attached sheet.
I have number 10000 to 10200 in column D.
I need to use IF Statement and add corresponding number in Column A as follows.
IF D2 = 10000,10006,10012,10018,10024 and so on then A2=20002
IF D2 = 10002,10008,10014,10020,10026 and so on then A2=20003
IF D2 = 10004,10010,10016,10022,10028 and so on then A2=20004
(Basically there is increment of 6)
Once i have formula for A2 then i can copy down the column.
Book1.xlsx
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
I simply need to "break down" the numbers from the first box. The problem is that the distributional data (A, B, C) are not always the same. One day there might me 10 A's, another day 2, etc...
View 5 Replies View RelatedI am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:
=IF('4. NORMALITY ASSESSMENT'!AC55>'4. NORMALITY ASSESSMENT'!AA55,"YES", "NO")
Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.
I have a time entry spreadsheet where I total hours worked based on the time code entered in the cell next to the hours. I use a formula such as the following: =SUMIF(F11:AS19,"=AN",E11:AR19) which checks cells F11 thru AS19 for the timecode AN and when found, takes the hours in the cell before the code and adds them to the totals way off to the right.
The problem is that when someone does a cut and paste to the time data within the range of F11:AS19 and pastes it somewhere else, like to the next employees data (no formulas are being cut and pasted, just the detail data), the formula for that new line automatically changes to exclude the cells that were pasted over. It is as if Excel thinks that you pasted over that data so it is no longer of interest to you.
It is odd because you can cut and paste smaller ranges within that range with no effect to the formula but if you include the first column or the last column of the range in your cut, then the formula gets altered. If you cut and paste the entire range, the formulas all change to #REF!
In VBA formula below I would like to use instead of R[-587]C use cell (G1):
=IF(R[-587]C=""Yes"",1,0)
How do I do that?
I have attached a sample of the issue. The formula is found in cell B49. If I enter a gravity of 2.76 or higher in cell B47 I get #N/A in cell B49. Why will it not read any farther over than 2.75. I have been starring at this for awhile now. I might look pretty dumb after someone else looks at it.
View 2 Replies View RelatedNote: I know the syntax below is not how you would enter forumlas into Excel but I am using it to quickly illustrate what I'm trying to do and need help with. A cell not in column D, E, or F contains a formula of the form: F=IF(D>0, D/E, "blank") .
Note: If a cell in column D>0 (eg. D5>0) then the cell to the right of the selected D cell (eg. E5) will also be >0 ; otherwise, both cells will be empty.
This is what I want to do: If cell D?>0 , then F?=D?/E? ; otherwise, F?=empty .
Example 1: If D5>0, then F5=D5/E5 ; otherwise F5=empty .
Example 2: If D7>0, then F7=D7/E7 ; otherwise F7=empty .
Etc. I want this to apply to all rows.
I cannot enter the formula directly into the F? cell because sometimes I will need to enter data into cell F? manually. When I need to enter data manually into F? this results in the formula being overwritten by the new data and this means that if I ever needed to have data calulated based on the formula F=IF(D>0, D/E, "blank") I would have to re-enter the formula from scratch over again; obviously this is a nusance.
I have a file wiht 2 sheets, on one sheet I have a macro that opens 25 other excel files and pastes information into the sheet in a specific order. Then on the "main" page I have different calculations based on the information from the other sheet.
The Information is listed in a row so for example B2:M2 or B3:M3. If a value has not been assigned the vcell will be empty (No formula or anything, completely empty)
The Value in the cells will be between 0 and 100 (its a score from 0-100) so in the "main" page I want a formula that calulates the LATEST score (It will always be the first one on the furthest left and the latest one to the furthest right). Is there any easy formula to calculate this?
For example:
----B-----C-----D-----E-----F-----G-----H-----I-----J-----K-----L-----M
2|-10----30----75----85----93----12---12
So in the example I2:M2 is empty so the latest score would be H2 so thats the value I want to show on the main page.
I have a range of names (say A1:A10) and another range (J1:J3) which contains text strings such as "og", "alle", "ins".
What I need to do is to check each of the names in A1:A10 to see if the cell contains any of the values in J1:J3 (an "exclusion list").
For example:
A1 contains the name John Smith, so I'd need to return a value of false as none of the text strings in J1:J3 is contained in that name. But A2 contains the name Elizabeth Allen, so I'd need to return a value of true as that name contains the text string "alle" which is in the range J1:J3.
I could do three different checks using the formula =SEARCH(J1,A1), =SEARCH(J2,A1),, =SEARCH(J3,A1) and then copy those three formulas down A1:AA10. If I only had three exclusions to check on my actual data that's what I'd do, but my real-life exclusion list contains over 50 different values, and it's a bit time consuming to create 50 different search formulas!
I'm using the code below to create sheets and copy pertinent data for each value found in column O on my data sheet.
Code:
Sub CreateSheets()
Dim WBO As Workbook
Dim ThisWS
[Code]....
What I'm now trying to do, is apply a formula for each cell, in columns C:N for each newly created sheet. The formula is 'The value of 100 minus the value of the cell'.
I've tried adding
Code:
cell.Value = 100 - cell.Value
to differing points of the script but I recieve a 'Type mismatch error.
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
View 1 Replies View RelatedHere is my
Dim value1 As String
value1 = "=OFFSET($B$6,$A6-1,0,1,1)"
Range("g6:ad12").Formula = "=SUMIF(OFFSET(" & value1 & "!$j$6,0,0," & value1 & "!$A$5,1),(" & value1 & "!AS$5)-1,OFFSET(" & value1 & "!$n$5,1,0," & value1 & "!$A$5,1))"
my "value1" needs to equal the value in the corresponding row for the formula. For example:
B6 = "BEA"
B7 = "GE"
B8 = "TAS"
My formula only gets cell B6 value and doesn't pick up B7 or B8 as the formula copies from G6:AD12
how do i get it to pick up B7 then b8?
this formula is on Sheet1 and works ok but would be a LOT better if I could use some variables in it.
=SUMIF('Sheet2'!$D$56:$D$96,Sheet1!G3,'Sheet2'!$E$56:$E$96)
G3 is a date
$d$56 to $d$96 are dates
$e$56 to $e$96 are Dollar amounts
I would like to be able to replace the $d$56 to something like $D
and $d$96 with $D
same with $e...
I want to be able to do is to have a text value in a cell which will be the same as a named range and can be called from a formula in another cell. For example, I have three named ranges: JAN, FEB and MAR. Instead of having a formula which might read: =VLOOKUP("bill", JAN, 1, 1)
I would like to have in cell A1 the text value "JAN" so that the formula can read:
=VLOOKUP("bill", A1, 1, 1)
Then I can change which named range is used in the formula but changing the value in cell A1. When I try to do this, the formula just looks up the value as if cell A1 was the range rather than taking the value from A1 as the named range.
I currently have the following code to copy and transpose data from one worksheet to another:
Range("E3:E6,E10:E53").Select
Selection.Copy
Sheet3.Range("A65536").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues, Transpose:=True
What I would like to do is add to this code. I would like to add the following formula to the cell at the end of that pasted row. =VLOOKUP(Range,LeaveIndicator,6,FALSE). In this case the Range needs to be Row D and the last row of sheet3.
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
I am working an Excell sheet. It have many cells with formula like sum of a range of cells etc.
I wanted to divide a range of cells with the given cell (which is inturn having a formula for sum of a range of cells.) want i wanted is to divide a range of cell values with a given cell whose value (number) is obtained through a formula.
when i do
=100*(v65)/v20 for T65 cell and copy the formula for T66-T106 cell range
it is calculating for T66=100*(v66)/v21 and T67=100*(v67)/v22 ........T106=100*(v106)/v61
what I want is all the cells T66=100*(v66)/v20 ... T106=100*(v106)/v20.
Scenario:
A1: The War of Art by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook
A2: Do the Work by Steven Pressfield (Apr 20, 2011) - Kindle eBook
A3: How to Get the Raise You Want in 90 Days or Less: A Step-by-step Plan for Making It Happen by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook (Note: This cell (A3) have "by" 2 times)
I want to extract text from RIGHT till the word "by"
So the result must be:
B1: by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook
B2: by Steven Pressfield (Apr 20, 2011) - Kindle eBook
B3: by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook
I have value of 26 in Cell A1, for example and I want to find
whether or not that value falls with a range of cells B1:C2 (which is in another sheet) and if so return the value in D Range.
A1 B C D
26 20 30 100
How would my formula look?
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
Not sure if possible but im trying to pass a range to a formula in excel from another cell.
[URL] .......
There is a sum formula in range B5 that sums the range (B9:13). I would like to have a formula in cell D5 that passes the new range in cells(D9:D13) to the formula in cell B5 and give the result in cell D5. Is this possible using Excel functions or would i need to create some sort of user defined function for this?
I have several named ranges with 4 column each. The named ranges have all the same names but with the tow last digits ranging from 00 to 50 by increments of 5 (ie 00, 05, 10, 15 etc.). The 4 columns for each of the named ranges have the following headings; 10, 100, 50 ,70. I have two cells with drop down lists with the list of the suffixes of the named ranges in cell e5 (ie 00, 05, 10, etc) and in g5 a drop down list with the 4 headings for the columns (10, 100, 50, 70)
I want to refer to these 2 values so that in column B, I can get the values of the column chosen for the given named range. For example, the column "100" for the named range THRESHOLD_10. In cell C1, I entered the following formula ="THRESHOLD_"& E5 which gives me the named range name. I entered the following function in the first cell of column B = index(C1,2,G5) but get a #REF! answer. If I write the following formula =index(THRESHOLD_10,2,G5) I get the right value.
how to get about it, and indirect(C1), but still gets a #REF! message. When I evaluate the formula, the named range appears with quotes "" which might be the reason that it cannot work. I am nearly there...but for the syntax and cannot get that working!
Here is what I would like to do: Have a formula like Max(B12:B14) change to Max(B12:B18) when I change the value in different cell from 3 to 7. I would like to stay away from the macro world and keep in formula world if that is possible.
View 6 Replies View Related