Formulas In Columns Converted To Rows
Aug 13, 2009
I currently have formulas in a column setup (equations are not actual)...
Cell B1: =IF(A2>A3,"Y","")
Cell C1: =IF(B2>B3,''Y",''")
Cell D1: =IF(C2>C3,"Y","")
....
I want to switch these to one long row from one long column so that they span from Cell A1, A2, etc.
When I special paste or straight paste it obviously alters the formulas because I am also unable to cell lock the current formulas.
I am wondering if there is an easy way to convert my formulas, currently along a column, to a row? Or if there is also a way to cell lock a large amount of cells at once?
View 9 Replies
ADVERTISEMENT
Apr 24, 2014
I have a worksheet with a series of data in rows. Every 40th row is a sum of the previous forty rows.
I have a second worksheet that in a series of columns uses the 40th row sums from the other sheet. So column 1 uses row 40, column 2 uses row 80 data, etc.
Every time I update this, I create the new column using a copy and insert copied cells and then have to go to each field on the new column that uses this other worksheet to correctly update the formula for the new row. As when I do it this way, if Column 1 cell a1 formula said "worksheet2!A40, then the new column 2 cell b1 says "worksheet2!B40, where I want to make it be worksheet2!A80. I have tried highlighting a series of these corrected columns and dragging the formula over but still get a change in columns vs row from the other sheet.
I am looking to see if there is a way to do something like (in layman's expression):
(first column) worksheet 1, cell a1 = worksheet 2 cell A40
(second column) worksheet 1, cell b1 = worksheet 2 Cell A80
(third column) worksheet 1, cell c1 = worksheet 2 Cell (A80+40)
etc....
View 3 Replies
View Related
Dec 21, 2009
I have some mails in a colum and i would like to put with a formula into a cell.
For example, in column I have:
mail1@hotmail.com
mail2@hotmail.com
mail3@hotmail.com
mail4@hotmail.com
mail5@hotmail.com
mail6@hotmail.com
And into anything cell i would like to put with the coma:
View 9 Replies
View Related
Nov 13, 2006
If I have formulas in A1, A5, A19, and A36, highlight them with goto, how do I move them into B1, B5, B19, and B36? Copying and pasting puts them in B1, B2, B3, and B4.
View 9 Replies
View Related
May 28, 2009
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
View 2 Replies
View Related
Sep 25, 2008
I've got a rather large set of data consisting of many sheets of data. I need to gather some of this data in a summary for to make it presentable. (Common goal) Currently the summary page works on a series of sumproduct commands that reference other sheets and take a great length of time to compute. I'd like to change this into a VBA code to speed up the process and eliminate all of the Sumproduct referencing. I know that in VBA you have to use the execute command to sumproduct, but i continue to get errors that i cannot resolve.
This is a sample of on of the sumproduct formulas that works (though slow) in the sheet:
=-SUMPRODUCT((('June Data'!A2:A65535="18020")*'June Data'!I2:I65535)+(('June Data'!A2:A65535="18030")*(LEFT('June Data'!E2:E65535,2)="AF")*'June Data'!I2:I65535))
The Raw data comes in columns A thru L. I need to sum the values from column I when column A = "18020" or when column A = "18030" and the left to letters of column E are "AF".
When I input the sumproduct into VBA using the execute command I get a compile error, it says it expects a list seperator at the "18030" and doesn't like the quotes. When I remove the quotes or put single quotes the result i get is a NAME# in the cell. Any help would be appreciated. This is a clip of the VBA code. Also, anything that is faster than execute would be much appreciated. I suspect that even in VBA having to run 50 of these sums will take some time.
Range("q4").Select
Selection = Evaluate("=-SUMPRODUCT(('June Data'!A2:A65535="18030")*(LEFT('June Data'!E2:E65535,2)="AF")*'June Data'!I2:I65535)")
View 9 Replies
View Related
Apr 13, 2009
I would like to have a code (VBA) for the below formula so I do not have to protect my worksheet (column B).
=IF(D15="","",INDEX(Sheet4!$C$14:Sheet4!$C$3000,MATCH(D15,Sheet4!$A$14:Sheet4!$A$3000,0)))
The above formula ends down until B13000. I feel the slowliness of Excel. I have seen something like this using the code (VBA) and it was not so slow compare with the formula created on the cell.
View 9 Replies
View Related
Nov 3, 2008
I work for a company that exports data from a website into Excel.
So here's my problem:
The data is usually Part Numbers using numbers and letters. When a Part Number is, for example, 248E12 we have this reaccurring issue. Importing it into Excel automatically converts it to scientific notation (ie. 248E+12 or 2.48E+14 to be exact). "Format Cell" doesn't convert it back because it was auto-converted when "exported". I need a way of fixing this problem without going line by line and doing the math to convert it myself.
I don't have time for that. Some of my files have thousands of lines.
View 14 Replies
View Related
Feb 29, 2012
I have converted a column of dates to days using format & dddd. However I'd now like to count how many mondays, tuesdays, etc are contained in this list, however as the data is still a date I cannot seem to do this.
View 6 Replies
View Related
Jul 6, 2006
When I open a new excel workbook and enter a number in any cell it formats it as though I am entering a percentage. So when I enter 100, the cell value becomes 1. How do i change this? I have tried formatting the cells and no change....
View 3 Replies
View Related
Nov 28, 2013
I have adapted the use of StephenR's solution to a problem similar to that in the thread linked below. However I want to load the data directly into a new sheet instead of loading it into line 27 of the current sheet. This is the code I am working with, I think I need to change r2 somehow, not sure what to do exactly though.
[URL]
VB:
Sub KonverterFraMatrixTilListe()
Dim rng As Range, c As Long, r As Long, r2 As Long
r2 = 27
[Code]....
Another thing that I really want is for it to run not only for rows 4-8, but for rows 4-last row as defined by the A column.
View 7 Replies
View Related
Apr 3, 2008
If I create a Workbook in Excel 2003 with Pivot Tables when I open it in 2007 the Pivot Table are no longer there. It look like the Pivot has been converted to Data only. Are there any ways of correcting this?
View 3 Replies
View Related
Mar 9, 2009
I have attached an example sheet to help visually explain what I am going to try and articulate. Cell A2 and B2's values result in cell E2, Cell C2 and D2's values result in cell F2. The same is true for row 3.
So what I would like to do is, based on the predetermined ranges of the Height+Chest Columns, auto complete column E, and Columns C+D, auto complete column F. My problem is that I cannot simply cell A + B = E, because the maximum range of one layers the minumum range of another. An example would be Maximum of A+B is 101 to result in SXS in Columm C, but the minmum A+B to get a SS in column C would be 97. So what I need is, for another specific example:....
If cell A2 is between 57 and 65, and cell B2 is between 31 and 36, then Cell C2 must be SXS. If Cell A2 is between 66 and 68, and Cell B2 is between 31 and 36, then Cell C2 must be SS.
View 5 Replies
View Related
Apr 18, 2014
I want some vbs code on my 'Copy All' button in Email Data sheet which will do my work. Its a bit lengthy but who knows the concept will find it easy.
I have one sheets -
Sheet attached - Worksheet .xlsm
Workshet.xlsm [Data in 'Mod' sheet i)should convert from text to column and paste in 'Row Data' sheet ii) then transfer form Row Data sheet to 'Email Data' sheet 'Mobile Data' sheet and 'Other Data' sheet when Copy All button is clicked in Email Data sheet.
There should be some logic which will fetch appropriate date from 'Mod' sheet to the respective sheet . We can have some kind of logic like
If 'Register' found then take the value of register and workstation and paste in Email Data sheet.
All data below should be fetched from Row Data sheet which is blank now and will get the data when we click the Copy All button ,
1st Register Count:
Below Register Count (*) i.e. 16 If workstation count present copy to E15 in Email Data sheet in Table B
Below Register Count (*) i.e. 9 If register count present copy to E16 in Email Data sheet Table B
2nd Register Count:
Below Register Count (*) i.e. 8942 If workstation count present copy to C15 in Email Data sheet in Table B
Below Register Count (*) i.e. 2883 If register count present copy to C16 in Email Data sheet in Table B
3rd Register Count:
Below Register Count (*) i.e. 0 If workstation count present copy to E18 in Email Data sheet in Table B
Below Register Count (*) i.e. 1 If register count present copy to E19 in Email Data sheet in Table B
4th Register Count:
Below Register Count (*) i.e. 98 If workstation count present copy to C18 in Email Data sheet in Table B
Below Register Count (*) i.e. 999 If register count present copy to C19 in Email Data sheet in Table B
Substr:
B32:B44 will be pasted in C29:C41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
B50:B62 will be pasted in B29:B41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
View 1 Replies
View Related
Jan 15, 2008
Is it possible to apply a formula with a relative reference to an entire column? I have a very long, constantly updated datasheet for pivot tables and this would be a most helpful thing to know.
View 9 Replies
View Related
Jul 28, 2013
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
View 14 Replies
View Related
Apr 11, 2009
I have data from F1 to AG1...I am unable to create a formulae & drag in excel in a column like
=F1
=G1
=H1.....If i drag after H1...it is reflecting as
=F4
=G4
=H4.
View 3 Replies
View Related
Nov 6, 2008
I would now like to as remove the first column and add another column a and b. A would say "Service From Date" and column B would say "Service To Date" In addition I would like to add a column between "5202 Meals Provided" and "5221 S.A. Facility Lodging" a column that reads "7025 Number of Days Care" and that tallies like the rest of them.
View 14 Replies
View Related
Dec 9, 2008
I need to editing a VBA script and can't assist right now. Here is the VBA script as it exists today:
View 3 Replies
View Related
Apr 6, 2012
I'm working on a project that spans three sheets. A2:A151 of Sheet 1 and 2 is a list of names. The names may repeat and they probably won't fill all 150 rows. What I'd like to do with formulas is combine Sheet 1 and 2 into a single list in Column A of Sheet 3 without repeating names or showing blanks. I'm fine with multiple formulas and hiding columns, whatever needs to be done to make it work. Is this possible?
View 2 Replies
View Related
May 12, 2013
I have column AD where there are something like 2,500+ formulas. I would like to change the columns used in the formulas around. By that I mean the first formula is...
Code:
=SUM(AA6-X6)
...and I would like it to be...
Code:
=SUM(X6-AA6)
Now the thing is, the formulas are not continuous, there are breaks where there is a formula to sum say the previous dozen or so for example, then it skips a couple of rows and I have more formulas and then the sum say for the previous dozen for example and so on.
I just want those cells changed with the particular formulas as above.
View 1 Replies
View Related
Dec 3, 2013
I have 2 sheets in my excel document. The first sheet (sheet1) has student data (grade they got on a test) from C5:C35 all in 1 column. On the 'second' sheet (sheet3), I have made a profile for each student (there are 30 of them, spread out 1 per printable page). I want to take Sheet1!C5 result and put it in sheet3!D7. The formula in sheet3!D7 would just be =sheet1!C5. I want to 'drag' that formula to L7, then to T7 then to AB7 etc etc (they are all 8 columns apart), obviously not affecting any of the cells between them.
There are 12 pieces of data in sheet1 that I want to auto update in sheet3, for 30 students, so copy pasting, and adjusting the formula would take a long time.
View 7 Replies
View Related
Jan 21, 2014
I need to 'fill down' a series of formulas in several columns - but the number of rows I need to fill down will vary dependent on my raw data.
See attached file.
Worksheet 1 - contains the raw data which is copied and pasted in from an external source. In this example, there are 20 records.
Worksheet 2 - brings in the raw data from worksheet 1 and does some calculations. The formulas are in the first 30 rows - in case the number of records grow. But what happens if the number of records is, say, 40?
I have a much bigger workbook in reality - so having too many formulas will increase the file size.
Simple example.xlsx
View 3 Replies
View Related
Apr 4, 2014
i have a data entry tab where we put names and button to sort and hide blank rows from other tabs. Problem i want to move down the number entered also. something like extend sorting but not affecting the formula on the other columns.
View 2 Replies
View Related
Jun 4, 2014
in my workbook: in sheet1 i have many cells with formulas which calculates values from sheet2. I also have a macro which is used often that will arrange and prepare data in sheet2, including adding some columns.
The problem is that after these columns are added, the formulas in sheet1 will be changed, even if I used f4 ($) in the formulas.
how can I freeze these formulas? I think a solution is to include the formulas in sheet1 in the macro I'm running for sheet2. But I would like to avoid this.
View 2 Replies
View Related
Feb 7, 2014
I have a very simple inventory spreadsheet that I used to keep track of certain products. The issue is that I often have to insert new columns and when I do, the formulas get convoluted. Is there a trick to making them follow the structure of the formula before?
My formula is =SUM(GT4:GU4) and appears in the Running Total column. When I insert two columns - a white column where an order will be inserted, as well as a running total column. When I perform the insert, the formula for the inserted columns, as well as the set of columns immediately to the right require corrections:
Inserted columns: =SUM(GT4:GW4) [Should be GV4:GW4]
Columns to the right: =SUM(GV4:GY4) [Should be GX4:GY4]
I know how to manipulate the formulas correctly, I would like to keep a clean file for my predecessor.
View 1 Replies
View Related
Nov 29, 2006
I am trying to use a button on the top of the sheet to add a line from wherever they are in the worksheet with the formulas on the above row. Example: 0=formulas
0---------------0---------------------0--0
they are here beneath the line
they press the button on the top of the sheet
0---------------0---------------------0--0
the row is created above the current cell their in with the exact formulas intact.
I am trying to have the sheet protected (so the formulas are not seen) but in order for the user to add a line they have to copy and paste the formulas above to the new line which can't be done when formulas are protected.
View 6 Replies
View Related
May 13, 2014
I need to list only the unique values in a range found in multiple columns. Some cells are blank. I need to list all the unique values in numeric and/or alphanumeric order in another column within the same worksheet. I would prefer non-array formulas, if possible. See the attached file.
In the attached table, I have 5 columns and 5 rows of values in the range B2:F6. The unique values, in order, are 0, 1, 2, 3, 4, 5. This looks simple and can be done manually if the file is small but I have 150 columns and 150 rows, thus the need for automation.
List of unique values in multiple columns 2.xlsx
View 4 Replies
View Related
Nov 3, 2013
I was wondering if there was an easy way to copy columns (headings) and the formulas to a new sheet. I'm currently working on Sheet 1, need to copy everything onto a new sheet so I can keep things separated by week..
Example, Sheet 1 is Week October 30th, would like my 2nd sheet to have same exact headings and formulas which I would then rename to Week Nov. 1st etc..
Also, is there a way that I can then copy the 4 sheets that would make up a month into a new spreadsheet so I can then start December...
View 5 Replies
View Related
Nov 10, 2011
I need some VBA code that puts in formulas to pull data in various columns within row 2 of another worksheet.
The formulas need to be entered below some other data, which is populated from another prior macro.
The below code works well but as the prior macro can populate a different number of rows on different days, the Row count then also changes and doesn't always refer to row 2 of 'HLDRT before' tab.
ActiveCell.FormulaR1C1 = _
"=IF('HLDRT before'!R[-22]C[-18] = ""A17"",RIGHT('HLDRT before'!R-20C[14],3)&'HLDRT before'!R-20C[9]&'HLDRT before'!R-20]C[-13],"""")"
Is there a way I can tell the above code to always use row 2 from the 'HLDRT before' sheet, while keeping the column number lookups the same?
I think there is a way to do it by removing the [] signs but I can't get it to work. I also then need the macro to copy these down so I'm not sure if using $ will cause problems?
View 4 Replies
View Related
