I have some mails in a colum and i would like to put with a formula into a cell.
For example, in column I have:
mail1@hotmail.com
mail2@hotmail.com
mail3@hotmail.com
mail4@hotmail.com
mail5@hotmail.com
mail6@hotmail.com
And into anything cell i would like to put with the coma:
I currently have formulas in a column setup (equations are not actual)...
Cell B1: =IF(A2>A3,"Y","")
Cell C1: =IF(B2>B3,''Y",''")
Cell D1: =IF(C2>C3,"Y","")
....
I want to switch these to one long row from one long column so that they span from Cell A1, A2, etc.
When I special paste or straight paste it obviously alters the formulas because I am also unable to cell lock the current formulas.
I am wondering if there is an easy way to convert my formulas, currently along a column, to a row? Or if there is also a way to cell lock a large amount of cells at once?
i have a problem in copying many columns to to rows that originally contains data, this is gonna be really complicated so here is wt i want, let's assume i have this table .....
View 6 Replies View RelatedI am trying to convert some data...
I have a spreadsheet of 1000 rows on my spreadsheet and I am trying to convert them to 2 columns. Below is an example
Antidiarrheal AgentsBrand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume
Antidyskinetics Brand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume
I want it to look like this:
Antidiarrheal Agents Brand or Series
Antidiarrheal Agents Application
Antidiarrheal Agents Generic Drug Name
Antidiarrheal Agents Strength
Antidiarrheal Agents Type
Antidiarrheal Agents Dosage Form
Antidiarrheal Agents Container Type
Antidiarrheal Agents Volume
Antidyskinetics Brand or Series
Antidyskinetics Application
Antidyskinetics Generic Drug Name
Antidyskinetics Strength
Antidyskinetics Type
Antidyskinetics Dosage Form
Antidyskinetics Container Type
Antidyskinetics Volume
Is there a formula or a suggested way of doing a macro to acheive this?
I want to convert a bloack of rows to columns
1abc2xyz3mnq
4efg5klm6rst
required format
1abc
4efg
2xyz
5klm
3mnq
6rst
I have a spreadsheet that consists of columns of data and I need to covert it into rows depending on how the data is set up. In column A, there is a list of invoice numbers. Columns B, C, & D are as follows:
Column B: Sales Rep Name
Column C: Sales Rep Number
Column D: Sales Rep % Split
I want to have a single row for each unique invoice number. As an example, I have the following:
Row 1: invoice ABCD-1234 Sales Rep 1: 55%
Row 2: invoice ABCD-1234 Sales Rep 2: 25%
Row 3: invoice ABCD-1234 Sales Rep 3: 20%
I want the output as follows:
Row1: invoice ABCD-1234 Sales Rep 1: 55% - Sales Rep 2: 25% - Sales Rep 3: 20%
I have attached a sample workbook with two sheets; one containing the raw data and the second, which shows the desired output.
I have data which is in rows. I want them to be in 5 columns.
I am attaching the sample.
for some of the entries, there will be 6 rows:
Company Name - 2nd row
Address - 3 row.
In this case, I want to combile them as one entry Separated by a comma
& placed in one column
Eg: For 3rd one in sample,
Haifa Marble & Tile
69 Garfield St
Wanted Result: Haifa Marble & Tile, 69 Garfield St
If this is not possible, then suggest how to combine two columns to make it
into one column separated by comma.
If I have formulas in A1, A5, A19, and A36, highlight them with goto, how do I move them into B1, B5, B19, and B36? Copying and pasting puts them in B1, B2, B3, and B4.
View 9 Replies View RelatedSolution to convert data columns to rows in excel.
View 4 Replies View RelatedI have a data in Coloumn "A":
12345678910
I need to Convert the Data in B1 Like
1;2;3;4;5;6;7;8;9;10
the No of Columns may increase, but i should get a data till where the data is in Coloumn "A" ends.
I have a very large sheet of all US zip codes by county name. Unfortunately, the document builder decided to list up to EIGHTEEN columns of zip codes per county name... I assume to make it easier to look at.
I now need to rebuild the sheet to have one column of county names and *one* column of zip codes, which will be a nearly impossible task if I don't find a way to automate the conversion.
Attached is a sample... sheet 1 is my initial state (except here its 5 columns rather than 18), and sheet 2 is my hoped for end state. Notice that the zip codes can, but don't always, fill every column allotted.
I'm currently faced with a spreadsheet that has data formatted like this:
A
1 RandomRowofData1
2 RandomRowofData2
3 RandomRowofData3
4 RandomRowofData4
5 RandomRowofData5
6 RandomRowofData6
7 RandomRowofData7
8 RandomRowofData8
9 RandomRowofData9
Every 9 rows, a new "set" of data repeats itself (wow, this is so hard to put into words)....
I need to figure out a way to get the data in column "A", every 9 rows, to transpose itself into 9 separate columns.
How to convert multiple Rows recors to a single row record in a Notes(csv) format? Have update my xls file. My source is in the below format(Source.xls):
GroupName_A,Name_A
GroupName_A,Name_B
GroupName_A,Name_C
GroupName_B,Name_D
GroupName_B,Name_E
GroupName_B,Name_F
GroupName_B,Name_G
GroupName_B,Name_H
GroupName_B,Name_I
I want to convert it to a CSV file where by it can be import to Lotus Notes (output.xls):
1,1,Group,GroupName_A,"Name_A,Name_B,Name_C","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM
1,1,Group,GroupName_B,"Name_D,Name_E,Name_F,Name_G,Name_H,Name_I","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM
As you can see only GroupNameN, and Name_N are varibles, the rest of the fields are static. note that there is opening and closing quota for column "E" and "F" in output.xls
I currently have a spreadsheet that I had to convert from multiple rows to columns:
[URL]
Now I need a script to change the data so that each column is now in row format, (see attached spreadsheet).
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I have lot of data in Excel 2010 which I wish to bring in Columns using a Macro depending on the input value which the macro should prompt me. For E.g.:
A1B1C1D1E1F1G1H1I1J1
12345678910
12345678910
12345678910
12345678910
12345678910
If I select data from A1 and J1 (in practical it will be more Columns) the Macro should prompt me how many Columns would be the output on Master Sheet. If the input is 2 then it should create an output Sheet "Master" and should show the following result
A1B1
12
12
12
12
12
34
34
34
34
34
56
56
56
56
56
.. ..
.. ..
It after selection I run the macro and input 3 then the output should go in three columns (A1,B1,C1) one below other. If 4 is Input then 4 Columns (A1,B1,C1,D1) will come below each other so on and so forth.
If you have a cell with the value ="2*c2+3" NB: (Notice the ""), then to make excel convert the formula in another cell to =2*c2+3 (notice the removal of ""), so that it can calculate the value of the cell instead of showing a textstring?
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
When I was using Excel 2000, there was an Excel add-in where I could highlight rows of information and then transpose these into columns of information. Since we have upgraded to Excel 2003, the same Excel add-in does not work and I have not been able to find a simple solution to transpose my information from a horizontal view to a vertical view or the reverse.
Or do I just have to move 53 columns (weeks) of 4 rows one cell at a time to 4 columns of 53 rows (weeks)?
I have a product mix values as below. I want to convert the values into the % of total product mix.
CREATE TABLES LIKE BELOW?
----G---- ----H---- ----I---- --J--
4 Product A Product B Product C Total
5 32 73 125 230
6 14% 32% 54% 100%
To avoid manually updating a formula 100+ times, I am looking for a way to update cells in a column with reoccuring formulas with references to other cells that vary respectively from cell to cell. Meanwhile, there are other cells without formulas that this will not apply to in the same column. I am trying to avoid macros if possible, unless it can be easily understood/modified by someone who knows next to nothing about macros or VBA. My initial thought was to use the find/replace feature, but I don't know of any way to do this so the reference will update respectively for each cell (ie A9 then A10 etc.) in both the find and the replace fields.
ie
Find: A9="Text1"
Replace: OR(A9="Text1",A9="Text2")
Where the row number updates respectively.
Simplified example:
Existing:
=IF(A9="Text1","1","2")
[misc. blank or non-blank cell]
=IF(A10="Text1","1","2")
etc..................................
I am copying the value in a cell to another sheet's cell. I want to convert the formulas on the second sheet to reflect their value. I do this all the time within cells by using Past Special and Values however it doesn't give me that option within the Text Box
View 2 Replies View RelatedI am trying to find a way to search for specific cell formulas (not the values they produce). For example, how could I search an Excel tab for a cell containing "= sum()" ? I want to ignore all other formulas and values. I then want to replace this formula only with its value.
View 4 Replies View RelatedI have a names in column A starting with row 7 as follows:
Walden, Douglas E
Haden, Michael
Wilson, Matt David
I need help with coming up with 3 formulas:
(1) That returns the First, Middle Initial, & Last Name in column P of the same row:
Cell P7 Douglas E Walden
Cell P8 Michael Haden
Cell P9 Matt David Wilson
(2) That returns the First & Middle Initial in colum Q of the same row:
Cell Q7 Douglas E
Cell Q8 Michael
Cell Q9 Matt D
However, I am so new at this, the simpler the formula the better because I want to try & understand it, not just learn it.
I want to convert multiple sections that contains formulas to values. Usually i did this by coping range of cells, and paste as Values. But now i have multilple sections and excel doesn't allowe me to copy multiple sections. (i can not use clipboard, because there are more than 2.5 k rows)
View 7 Replies View RelatedI want to create a Macro to convert the formula results from a filtered data range to values. I thought to use a simple code to do the copy - paste to value
Sub QuickSaveValue()
Dim r As Range, c As Range
Set r = Selection
For Each c In r.SpecialCells(xlCellTypeFormulas)
c.Copy
c.PasteSpecial xlPasteValues
Next c
Application.CutCopyMode = False
End Sub
But is not good because the range is much to large and i need just a filtered part to be changed and i tried like this:
Sub QuickSaveTV()................
I have an excel file with 2 sheets. Sheet 1 has a column that contains formulas (ie (18299*11151)/20067 ) Those numbers are IDs referencing questions stored in Sheet 2. What I would like to do is find a way to look up those questions and place them into the formula instead of the ID numbers.
View 6 Replies View RelatedI am creating a Macro to convert formulas to values on a Datasheet after each entry from a form (worksheet) is carried over. Since each entry will go on a separate row I created formulas to give the new datas location. I just can't get the syntax correct for it to run.
Sub Convert_Formulas_to_Values()
Range("Reviews!$B$202").Value: Range("Reviews!$AF$202").Value.Select
Selection.Copy[code]....
I'm using Excel 2007 and I'm a VBA novice.
Problem: The macro will be assigned to a command button and will be used by laypersons when they finish filling in data on a worksheet in Workbook 1. The sheet contains maybe 30 columns and 50 rows with a mix of fixed values and values generated by Vlookup and Indirect formulas. I need to copy the sheet from Workbook 1 to Workbook 2. Workbook 2 will be for archival purposes so I want to convert all formulas to fixed values. The catch is dealing with some cells that contain hyperlinks to PDF files...
Current Solution: I currently do this with a macro that moves/copies the sheet from Workbook 1 to Workbook 2, it then selects all cells in the new sheet in Workbook 2, copies all cells, then pastes-special "as values" to the exact same cell locations. This works great for me since the cell formatting and data in the sheet are VERY irregular and I have merged cells all over the place. This method keeps the exact formatting I need maintain:
ActiveSheet.Copy After:=Workbooks("Workbook2.xlsx").Sheets(1)
ActiveSheet.Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
The problem is that a few of the cells have hyperlinks with "friendly names" and I lose the hyperlinks when I convert to values. The hyperlinks are not inserted directly, they are created by a formula, =HYPERLINK("N:Filepath"&C16&".PDF", "Click_For_PDF"), and the row and column that contains the hyper link will vary for each sheet I want to migrate from Workbook 1 to Workbook 2 using this macro. I want to keep the hyperlink active with the clickable friendly name in Workbook 2.
Possible Solution: I'm open to all types of solutions, but is there a way to essentially use my existing macro but AFTER converting to values with paste-special, go back to the original sheet in Workbook 1 that still contains formulas (or maybe a temporary duplicate sheet I migrate to Workbook 2?), search for all cells with a "value" of "Click_For_PDF", copy ONLY those cells and paste (normal) into the corresponding cell locations in the sheet in Workbook 2 that now contains fixed values? ALL of my hyperlinks have the friendly name "Click_For_PDF" so it should be an easy way to identify the hyperlink cells. The cell location of the hyperlink copied in Workbook 1 needs to carry over to Workbook 2 and I said before, the row and col vary with every sheet I want to archive with this macro.
I have cells (all in one column) containing text separated by commas e.g. (SD-299, SD-200, SD-300)
I am trying to transpose the text in these cells into rows.
VB:
Sub SplitAndTranspose()
Dim N() As String
N = Split(ActiveCell, ", ")
ActiveCell.Resize(UBound(N) + 1) = WorksheetFunction.Transpose(N)
End Sub
The problem with that is that when transposing it does not shift the cells down (/ insert new rows) so I lose the data already in the cells underneath.
Also, that macro would only apply to one cell I would like to be able to apply it all the data in the specific column on my Sheet.