Add Rows With Formulas From Above
Nov 29, 2006
I am trying to use a button on the top of the sheet to add a line from wherever they are in the worksheet with the formulas on the above row. Example: 0=formulas
0---------------0---------------------0--0
they are here beneath the line
they press the button on the top of the sheet
0---------------0---------------------0--0
the row is created above the current cell their in with the exact formulas intact.
I am trying to have the sheet protected (so the formulas are not seen) but in order for the user to add a line they have to copy and paste the formulas above to the new line which can't be done when formulas are protected.
View 6 Replies
ADVERTISEMENT
May 7, 2006
I have a simple spreadsheet that will be used by others for records management (rehabilitation case management). I have entered the code for most of the 'stuff' that I need to make the workbook easy and simple to use, and get the data back to head office each month.
Because the users will be emailing their records and I haven't yet worked out a way of sending just the "open cases", I need to keep the workbook/worksheets small (and to maintain good programming).
In column L, I have copied this formula from L2:L501:
=IF(ISBLANK($K2),"",VLOOKUP($K2,LOCSTAT!$A$1:$N$299,2,FALSE))
Column K is where the case-managed person works and so column L returns the geographical location value. Obviously it's blank until the case is opened by starting a new record and entering each field with data. For example, the user can select " Finance" from a validated drop-down list and the adjacent cell (to the right) will look up the value and return "Parramatta".
How do I translate the cell formula to some VBA?
I suspect that the static VLOOKUP range in the formula (LOCSTAT!$A$1:$N$299) will need to be dynamic range as well - I can follow the instructions for a single column dynamic range, but I am also getting lost working out how I can create a dynamic range for all data on a dedicated worksheet.
I'll be able to translate a solution to other cells as well
View 8 Replies
View Related
Mar 23, 2007
I have this macro that adds whatever formula that is in L1 to the same cell down 66 rows. But it doesn't work like the way I want it to because it's stopping when it sees empty cells...so the problem is that my colum is actually completely empty...so how do I get it to stop when I want to?
Sub every66rows()
Dim i As Integer
i = 1
With Range("L1")
Do Until IsEmpty(.Offset(66 * i))
.Copy .Offset(66 * i)
i = i + 1
Loop
End With
End Sub
View 9 Replies
View Related
Jan 25, 2014
I am looking to create a userform to add new rows to a sheet, and continue the formulas in certain columns.
The user starts by entering a number in the text box tbRowAdd. When the user clicks on the button called btAdd it first checks to make sure the number entered is equal to or between 1 and 1500. If this is not the case it should display a message box saying "You must enter a valid number from 1 to 1500 in the tex box."
If the number is valid it should then add that amount of rows below the current active cell in the worksheet ReturnData.
It should then continue the formulas in the A, B, C and F columns. The formulas are as follows:
A: =IFERROR(IF($D6="", "", ROW($A6)-ROWS($A$1:$K$5)),"")
B: =IFERROR(RANK($C6,$C$6:$C$99986, 1),"")
C: =IFERROR(IF(OR(AND(ReturnData!$D6>=Search!$E$1, ReturnData!$D6<=Search!$E$2),OR(Search!$E$1="", Search!$E$2="")), IFERROR(SEARCH(Search!$E$3,$E6,1),"")-(-IFERROR(SEARCH(Search!$E$4,$F6,1),""))-(-IFERROR(SEARCH(Search!$E$5,$G6,1),""))-(-IFERROR(SEARCH(Search!$E$6,$H6,1),""))-(-IFERROR(SEARCH(Search!$E$7,$I6,1),""))+ROW()/100000, ""), "")
F: =IFERROR(VLOOKUP($G6, EquipmentData!$B$3:$C$1048576, 2, FALSE),"")
Each number in bold should match the row number (I dont know if this happens automatically or requires coding).
View 5 Replies
View Related
Jan 1, 2009
I have a spreadsheet with customised formats and formulas and the problem is that when add a new row I have to go through and manually copy all the data to the new row and as there are many columns in the spreadsheet this takes forever.
Is there anyway I could automatically copy all the formats/formulas when I insert a row?
PS: I do not want to copy any data into the cell only the formatting and formulas
View 10 Replies
View Related
Sep 28, 2009
delete rows without affecting formulas
In general, when you write a formula:
In Cell A1:
View 7 Replies
View Related
Jun 22, 2012
a huge spreadsheet that is taking up way too much time. It starts out with 6,000-7,000 rows, but then, she does Subtotals & it grows to nearly 10,000 rows! Then she has to deal with each & every one of the Subtotal rows, by hand. Here is a small sample of the spreadsheet, after the Subtotals have been applied:
Manifest Dttm
Manifest No
Carrier Scac
[Code].....
This sheet has columns A-Q. The key columns for our purposes are K (Weight In Lbs), L (Pickup Charge) and M (Consolidation Charge). We need to add information to column R on each SUBTOTAL row only! On each row there will be an amount in EITHER column L or column M, but not both.
1) If the amount is in L and K is LESS than 488 then R needs to show 44.39.
2) If the amount is in M and K is LESS than 124 then R needs to show 3.82.
3) If either
a. The amount is in L and K is 488 or HIGHER or -
b. The amount is in M and K is 124 or HIGHER
THEN R needs to show a formula to do this: (L+M)/(K/100)
Is there a way to either put a formula in just the Subtotal rows to accomplish this or (preferably) have a macro enter either the 44.39, 3.82 or the formula? I was able to come up with a formula that gets the correct amount in col R. Here's my formula:
Code:
=IF(AND(M3=0,K3123))),SUM(L3:M3)/(K3/100))))))
View 6 Replies
View Related
Jun 23, 2013
delete rows of a report which contains $- or zero value but not row with Beginning Balance. Data begins from Column B to Column E. Some records may need to be deleted completely from Account Number down to Subtotal rows plus one empty row, if the Subtotal amount is $- or zero. Below is the sample data and how the finished sheet should look like. The report will comes in thousand of line. I don't have knowledge in programing but believe it can be done through VBA.
Account Number
211-00-5936-00-001-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
if Subtotal is $0, then delete the row starting from Account Number to Subtotal plus one empty row
211-00-5936-00-002-3-00-2-00
Trans. Date
Doc. No.
Trans. Line Comment
Actual Amount
[code]....
View 2 Replies
View Related
Jun 18, 2008
I have a spread sheet that I have locked with the expection of certain cells. I also have left the ability to insert and delete rows. The cells that are locked have functions in them run in sequance.
Is there a way that when the new row is inserted its copies the formula from the row above automatically but also adjust for the new row and adjusts the rows below it automatically?
For example if I insert a new row between rows 2 and 3 below.
(orginal layout)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (locked)(function is =sum(a3:b3)
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)
(layout after inserting row)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (unlocked) *inserted row*
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)
a5 (unlocked) b5 (locked)(function is =sum(a5:b5)
this is what i want the end product to be.
(layout if formulas are copied and adjusted after inserting row)
a1 (unlocked) b1 (locked)(function is =sum(a1:b1)
a2 (unlocked) b2 (locked)(function is =sum(a2:b2)
a3 (unlocked) b3 (locked)(function is =sum(a3:b3) *inserted row*
a4 (unlocked) b4 (locked)(function is =sum(a4:b4)
a5 (unlocked) b5 (locked)(function is =sum(a5:b5)
View 9 Replies
View Related
Aug 1, 2008
I have 100 excel file in a folder such as File1, File2, File3, File4 etc.There are some figures and reports on these files. format of all the excel files are same except values. And I have a master file.
As is:
On my Master file, I have n number of formulas in Row 10,which gets data from the above excel files.
eg. Master file Sheet1 Row 10,
I have formula like this from Column B
='[File1.xls]Sheet1'!$A$1 [File1.xls]Sheet1'!$D$1, ='[File 1.xls]Sheet1'!$A$1 [File 1.xls]Sheet1'!$M$1 etc.
In Row 11,
='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$D$1, ='[File2.xls]Sheet1'!$A$1 [File2.xls]Sheet1'!$M$1 etc.
If there are 1 or two files then I can type manually in each rows, But I have more than 100 files. So i need a macro which copies the formula from Row 10 to rest of the rows, If there are 100 files with different names in the folder, the formulas have to be copied to 100 rows in the master sheet.
if the file name changes on the formulas I will get the data correctly.
View 9 Replies
View Related
Apr 9, 2009
I have a large amount of data on a sheet which is being looked at by the following formula
{=AVERAGE(IF(LEFT(RAW_DATA!$C$4:$C$10000,LEN(Dashboard!$I$10))=Dashboard!$I$10,IF(RAW_DATA!$A$4:$A$10000=$A2,RAW_DATA!$J $4:$J$10000)))}
However, i don't need to keep the oldest data so I want to write a macro that deletes some of the top rows. Doing this in the normal way causes the formula above to change. I.e deleting one row cause the range to become $J$4:$J$9999 and so on.
Is there any way of deleting a row without affecting the formulas that are looking at it?
View 9 Replies
View Related
Aug 13, 2009
I currently have formulas in a column setup (equations are not actual)...
Cell B1: =IF(A2>A3,"Y","")
Cell C1: =IF(B2>B3,''Y",''")
Cell D1: =IF(C2>C3,"Y","")
....
I want to switch these to one long row from one long column so that they span from Cell A1, A2, etc.
When I special paste or straight paste it obviously alters the formulas because I am also unable to cell lock the current formulas.
I am wondering if there is an easy way to convert my formulas, currently along a column, to a row? Or if there is also a way to cell lock a large amount of cells at once?
View 9 Replies
View Related
Dec 21, 2009
I have some mails in a colum and i would like to put with a formula into a cell.
For example, in column I have:
mail1@hotmail.com
mail2@hotmail.com
mail3@hotmail.com
mail4@hotmail.com
mail5@hotmail.com
mail6@hotmail.com
And into anything cell i would like to put with the coma:
View 9 Replies
View Related
Jan 4, 2007
I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.
View 6 Replies
View Related
May 17, 2007
I have a problem with deleting rows that contains invalid formulas, these formulas are generated randomly daily in rows that contain no data and refer to empty cells in the same row.
Is there a code to delete rows an empty row in that by data it is empty, but not so because there is a formula?
currently this code of mine doesnt work on the zero data but formular-ed cell.. cause counta on the cell gives me 1
Dim i As Long, EmptyR As Long
EmptyR = ActiveSheet.UsedRange.Rows.Count
For i = EmptyR To 1 Step -1
If Application.CountA(Cells(i, 1).EntireRow) = 0 Then
Cells(i, 1).EntireRow.Delete
End If
Next i
View 9 Replies
View Related
Jul 2, 2008
Cell A1 can have only 0 or 1. Cell B1 can have any numeric value. Cell C1 takes the value of B1 if A1 is 1, otherwise it is 0. So, C1's formula can be either "=A1*B1" or "=If(A1=0,0,B1)". Lets say this formula is continued down to the 65000th row. My question is which formula is faster? The first one or the second one?
View 2 Replies
View Related
Jun 4, 2009
How would you copy a row's formatting and formulas but not value. for example: A1 1 B1 =a1+2
I would like the copied row to be: A2 (blank) B2 =A2+2
View 6 Replies
View Related
Jun 17, 2009
Formula: B2+C2
In columnD I want to reference the "formula" and have it calculate based on the values in whatever row references the formula.
As it stands I can only get the formula to calculate within the same row.
View 12 Replies
View Related
Dec 31, 2012
I have a spreadsheet with a lot of financial information going down a column (about 500 rows down). Most of the cells are just typed in, but certain rows have sum formulas in them. Is it possible to copy values from another workbook, paste the values in, but somehow keep the formulas that are running through?
View 1 Replies
View Related
Apr 3, 2014
I am looking for some VBA programming that will allow me to use 1 button to consolidate rows (delete them). The problem I am running into is that the rows I want to delete have formulas in them so I can use "find all blank cells & delete" type of macro.
Capture.PNGCapture1.PNG
Attached are a couple of brief images on a small scale what I am looking to do.
I want a user to be able to have this sporadic list of choices, consolidate them so the are all one right after each other, then export to a word file for editing later on.
View 1 Replies
View Related
Feb 14, 2014
I'm working on a spreadsheet that tracks project accepted and done over a course of time. I am expecting the data to eventually reach the thousands in a year's time. I have several formulas in specific columns that I need to replicate as the user enters new data into the next row.
While it is easy to copy paste the formulas from the cells above, we are looking to save time by having the sheet do this automatically which also prevents the user from accidentally deleting/modifying the said formulas. I am also looking to save file size which is why I am considering doing this in VB. An example of a formula that I need to move down into the next column is:
=IF(ISERROR(VLOOKUP(C2,Tables!A:B,2,FALSE)),"",VLOOKUP(C2,Tables!A:B,2,FALSE))
I am new to VB but would like to gain some understanding on how this works.
View 2 Replies
View Related
Nov 11, 2007
I have 2 speadsheets, I want to copy rows of Formulas from Spreadsheet 1 and copy them into Spreadsheet 2 but convert them into Values.
Is it possible to create a button on Spreadsheet 1 and assign macro to do exactly what i want? I also want the macro to look for the first empty row in the database so that the information being copied are on the next row and not overwritten.
View 10 Replies
View Related
Apr 25, 2009
I was tired of making my list smaller to upload it here, so I uploaded the complete thing on megaupload :P Here is the link:
http://www.megaupload.com/?d=1W6PBADE
On the bottom of the list is a button; "Add New Anime". When you click on that you get a UserForm where you can enter; Title, Type, Total Episodes, D/L Eps and Watched Episodes. When you press ''Add Anime" the entered values are entered at the bottom of the list, underneath the corresponding list names on the top.
Now there are 4 list names left (Left, Status, Status 2, and Progress (%)) I still have to make a option to enter Status 2 as well in the UserForm.
Now the question:
In columns F (Left), H (Status) and I (Progress (%)) are formulas. How can I copy those formulas automatically when I add something new with the UserForm? And can it automatically insert a new row, since I have to move the buttons down with every new title.
View 8 Replies
View Related
Jun 6, 2012
I have a SS that puls data from another sheet using the following formula
=IF(OR('Site Visit ASSESSMENT'!D9={"PARTIAL COMPLIANCE","NOT COMPLIANT","NOT ASSESSED","ADDITIONAL INFO NEEDED"}),'Site Visit ASSESSMENT'!A9,"")
I also have VB Code in teh sheet as follows to hide rows. If I protect colum A and protect sheet I get an error. How can I protect the sheet and still have the following commnad work?
Private Sub CommandButton1_Click()
'Toggle rows hidden where cells in column D are blank
If ActiveSheet.AutoFilterMode Then
[Code].....
View 6 Replies
View Related
Nov 13, 2006
If I have formulas in A1, A5, A19, and A36, highlight them with goto, how do I move them into B1, B5, B19, and B36? Copying and pasting puts them in B1, B2, B3, and B4.
View 9 Replies
View Related
Jul 13, 2009
I was searching through this site and found this macro ...
View 9 Replies
View Related
Jan 11, 2014
I am attempting to create a template to make time and dollar budgets for various projects easier to create (20 plus projects a year with varying number of employees).
I want to have a template in which you input the number of employees working in a cell (IE. 3 employees), and with that the table expands to have enough rows to have 3 employees data input. However, only insert the number required but not overriding "totals" row below. With the new inserted rows I would like to keep the same format and formula for the row it was based on.
Example :
week 1 hours
week 2 hours
total
[Code].....
View 2 Replies
View Related
Jan 19, 2014
how to highlight entire rows within a spreedsheet based on the information in a cell. I have gone to the conditional formatting and done:
=$A4="Needs Labs" and formatted that red, but when i go to note what areas it applies to, It will not highlight the row. I use the wizard box to decide where to apply the formatting like I saw on an online tutorial and dragged across the row, but nothing happened.
View 4 Replies
View Related
Dec 22, 2013
I have 90+ rows of data that I want to transfer into a table format on another worksheet. At present I have laboriously been copying and pasting from one to the other but am losing the will to live:
Id like to create a macro to do this for me. Is it a matter of recording the macro to replicate as I copy and paste or is there a better way....I have dabbled with a pivot table but cannot get it to do what I want.
Here is the code from a recorded macro that does one person/row of data but I dont know how to make this automatic for all rows of data (see below):
Sub staff_rpt()
'
' staff_rpt Macro
[Code]....
View 14 Replies
View Related
Feb 5, 2014
I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
View 5 Replies
View Related
