I have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?
is there a way to add an hour to the cell?
I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?
View 4 Replies View Related* Need a normal date calculation according to selected time zone. * Formula required in [D7], facing problem in Negative TimeValue.
View 7 Replies View RelatedI've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.
Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.
Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm
I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
I have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?
View 11 Replies View RelatedI have a spreadsheet that has Zip Codes by Service Days, and then I have another Spreadsheet Zip Code Ranges and the Zone they fall in. I want find the Zip Code associated within that Zone for the Zip Code. I listed some data below.
Zip Code Spreadsheet
State Destination Zip Service Days
NY 12095 2
Zone Chart
From Zip
To Zip
Zones
[Code].....
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I have a zone matrix I'm working on. How can I have a formula match the state and return the numeric value assigned to the state?
Say I enter WA in cell "G5" and in column A I have the states and column B has the numeric value assigned. I need to to match and return the value.
So if "OR" is entered the returned value is "1"
StateZone
WA1
OR1
ID1
[Code]....
I need a courier rate returned based on the zone and weight of the shipment. The rate table has 10 zones (B1:K1) and 12 weight classes (A2:A13)
In the sheet "data & result" I want the cost returned in the yellow cells from looking up the weight (D) and zone (C).
My question is i try to change the numbers in to min and sec like this here below.
Table row:
300 > in to this 3:00 and not like this > 00:03:00
1000 > in to this 10:00
10000 > in to this 1:00:00
that all automatic for the whole row.
Is that possible ?
In a particular month, I have some transactions with a consumed date. If the time falls at 12.00 AM in the end of the month, then the transaction goes into the next month. Below is an example:
3/25/2009 12.00.00 AM
4/1/2009 12.00.00 AM
I want all the transactions that fall on 4/1/2009 due to 12.00.00 AM to convert to 3/31/2009.
I have a column with times in it, it seems to be formatted to HH:MM I would like to change this to HH:MM:SS but it will not seem to change at all by formatting the cells, does this mean I will need to go through each individual time and change it to the new format or is there some sort of work around?
View 6 Replies View RelatedIf I try to change the value of more than once cell at a time, it cause excel to crash. By crash I mean, excel freezes and I have to manually end the program with ctrl + alt + delete.
Here is an example of the
If [a1] = "True" then
[b5] = "Text"
[c5] = "TextTwo"
[d5] = "TextThree"
End If
If I only have the code write to B5 and no other cell, it works fine, but if I try to fill in all three cells it crashes.
Need to Change date and time Format.
23 June 2013 14:02:10 BST
" 23 June 2013 00:47:58 BS"
23 June 2013 13:22:21 BST
23 June 2013 13:22:21 BST
Find the attached dump : jlr.xlsx
Required Output
06/23/2013 14:02
In Cell A1 I have the date. In Cell B1 is the shift. There are three shifts labeled as 1, 2, and 3. Is it possible to create a rule that will convert 1 to 0700, 2 to 1500, and 3 to 2300? Below is an example of how I need the shifts converted to time (military).
[Code].....
i am trying to make one cell automatically change to current date and time when the cell next to it has changed value. ive search other posts but cannot figure this out. so if cell A1 changes value cell B1 should automatically fill with current date and time cell A1 changed value.
View 9 Replies View Related provide an easy way to accomplish the following, turn a list like this:
5827627905072:36
5827557905112:37
5827447905152:38
5827507905282:39
5827307905312:40
into a list like this:
582730790531240
582735790543241
582715790545242
582722790563243
582707790565244
582706790570245
582692790588246
where the time is essentially text or a number now
I have data in column A and when i change that data in A, then time stamp should occur in column B. The problem is even when i press enter key in A column cells, i get a time stamp. how to avoid this?
View 2 Replies View RelatedI have a column that has time ranges in it. Example: Column N Row 6 thru
253 has the following time ranges: 11am-1pm, 1pm-3pm, 12pm-5pm, 8am-12pm
I need cells with 11am-1pm to read 13:00
I need cells with 1pm-3pm to read 15:00
I need cells with 12pm-5pm to read 17:00
Is there a formula that I can use the look up the entire column and make all the changes at once, or do I have to use the find a replace. The correct format can appear in a different column.
** I found a reply for someone one a different website with the similar problem. Below is the response but it did not work for me.
Try this formula =--SUBSTITUTE(SUBSTITUTE(MID(A6,FIND("-",A6)+1,11),"pm"," pm"),"am"," am")
Also change format to show 13:30 timeframe
I have a workbook with 120 LOI worksheets that all tie to one master data sheet, and I need to know the date and time of the last change on each worksheet and not the date and time of the last save. The date and time could either be located in a worksheet cell or in the individual worksheet header
View 4 Replies View RelatedI have a worksheet that needs revolving times based on the time now, if the time in the cell before the time now it moves up keeping in order, if it is after the time now it moves to the bottom of the list and starts again and this is based on a 24 hour period.
I don't know if this would work as a ranking formula or vba, either solution would be ok, but this on has me stumped.
I have a consolidated sheet which I maintain to keep track of the scores of my team. Unfortunately from time to time, the format of all the cells is getting changed to "time" value. I do sometimes use an addin which I have downloaded from Straxx.com (excel password remover) and I am not sure if this add-in has anything to do with this.
I am having to change the format of almost 20+ columns every time this happens.
I have a speadsheet with a column of student names with corresponding columns of classes and class times. The class times are on a rotating schedule and will be35 minutes later every week. Groups A to D have rotating lessons at 8.55, 9.30,10.05, 10.40 and groups E and F have rotating lessons at 11.45 and 12.20. I need to print slips with student names and class times each week. I want to be able to update the lesson time for the next week automatically. The only way I have thought to create a custom sort list with lesson times and I drag and fill series for new lesson times. However, the list doesn't return to the beginning of the series, it creates a new lesson time. My question is, is there a better way to update the lesson times?
View 1 Replies View RelatedI have spreadsheets I generate weekly that have 100s of rows. Everytime there is a data change in a certain column, I need the same row entered. I found a macro from this site that got me sort of half way.
I am trying to paste the macro that I found, but I am such an idiot I can't figure out how without it losing its formatting. Regardless, it only enters a blank row at every data change. Is there a way to enter a row with the same labels already entered in it?
I have an excel worksheet to display all debtor amount and create date.
When the create date compare with system date which is over 90 days, the debtor amount will be deducted and bad debt amount increased.
How should I use VBA to work out this? The debtor and bad debt are in 2 worksheets.
Im searching for a script to help me insert the current time value when a value within the row is changed. For example, if a value changes within the specified row, i.e. B1 changes, then within B12, the current date is inserted. However if B1 does not change then the old B12 value (old last change date) stays the same.
View 9 Replies View Related