Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm
How we can put a running clock in Excel Cell directly .
View 2 Replies View RelatedI currently use a manual time clock for my employees to punch in and out. I then use Excel to tally their times. This is very tedious and error prone.
Is it possible to use Excel as the timeclock itself? I know that the employee can enter the time in a spreadsheet manually. But this also opens the door for error and potential dishonesty.
What I am looking for is, if the employee can punch in and out by doing a keystroke and Excel uses the computer's clock to timestamp.
* Need a normal date calculation according to selected time zone. * Formula required in [D7], facing problem in Negative TimeValue.
View 7 Replies View RelatedI have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?
is there a way to add an hour to the cell?
I've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.
Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.
Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).
I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?
View 4 Replies View RelatedI would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
I've linked some cells to the date picker function so a date can be selected from a pop-up calendar.
Is it possible to do the same with a clock function?
I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
View 4 Replies View RelatedWhat i try to achieve is: from 00:00hrs to 24:00hrs = 24hrs which is 1.0 day
Have made the attached spredsheet to calculate it correctly to 1 day. But if you look on the attachment the "total hrs" is saying 00:00 (it transfers to 00:00 when i am putting in 24:00). Basically how am I able to make Excel to display 24:00 insted of 00:00. Maybe there is an add ins availible like the pop up calendar but for times instead.
Okay I have a basic Time clock calculation in excel (i.e.-(timeout1-timein1)+(timeout2-timein2)="Total time"). What I need to do is convert the "Total time" to be changed to 3 min increments. I don't know if that is the best way to put it but let me show you the chart for the conversions.
3 mins=.05 hrs, 6 mins=.10, etc etc etc.
So lets put this into us
A1 (timein1)= 6:42 AM
A2(timeout1)=11:30 AM
A3(timein2)= 12:00 PM
A4(timeout2)= 5:00 PM (17:00)
So A5(Total Time)=9h 48min, but I need it to equal 9.80 hrs because with the conversion, 48 mins is .80 of an hour. So how can I set up A5 (Total time) to automatically do this calculation? This website is how I would like it to work http://www.1728.com/timecard.htm
I've calculated the time of hours worked by staff using th 24 hour clock - "hh:mm" format.
When summing up the hours, it goes a bit haywire, i.e.
Staff A = 12:30
Staff B = 14:00
Sum = 02:30
Total should equal 26:30 (26 and a half hours), however I get returned 02:30. I assume it is down to the 24 hour clock and I so I tried adding 24 to it in the formula bar to get the right answer and it didn't work.
I need to calculate how much time I've got left before the earliest order needs to be despatched (it might be 2 or more on every day). This wouldn't be a problem if orders would be placed daily. But for every item it varies. For example: for "X" product there is an order in 3 days time to be despatched at 19:00. I have built a live clock in the spreadsheet but I can't work out the formula.
P.S. Also I need two time formats, first - days(text) hh:mm second - just a numeric value that can be formated as [hh:mm].
I want to make a Word Clock. Instead of showing the time as "12:30" I want it to show the words "It is half past twelve"
To Do this I've created a Square of Letters on an excel sheet (one letter per cell!) with black letters and black back grounds, when it is 12.30 I want the relevant letters to (cells) to change the text coulor to white so it shows up.
The cell I'm using are from D8 to P19 and the time is shown in A1
So lets say at 12.30 Cells D9, F12, H14 and M16 need to change from Black Text Colour to White Coulour,
I need a code or some VB that says "If A1 = 12.30 the Cells D9,F12,H14,M16 = White Text Colour, if not Black Text Colour".
I currently use a manual time clock for my employees to punch in and out. I then use Excel to tally their times. This is very tedious and error prone.
Is it possible to use Excel as the timeclock itself? I know that the employee can enter the time in a spreadsheet manually. But this also opens the door for error and potential dishonesty.
What I am looking for is, if the employee can punch in and out by doing a keystroke and Excel uses the computer's clock to timestamp.
I am trying to figure out the written formula for needing this answer:
For a time clock with 6 minute rounding.
If I type in 8:20 as the arrival time, I need it to round to 8:18, so that the final time will be in tenths.
Here is the rounding:
Actual Rounded Minutes in Time Clock
:57, :58, :59, :00, :01, :02
:03, :04, :05, :06, :07, :08
:09, :10, :11, :12, :13, :14
:15, :16, :17, :18, :19, :20
:21, :22, :23, :24, :25, :26
:27, :28, :29, :30, :31, :32
:33, :34, :35, :36, :37, :38
:39, :40, :41, :42, :43, :44
:45, :46, :47, :48, :49, :50
:51, :52, :53, :54, :55, :56
Anything in the same line will round to the bolded time.
Example: I arrive to work at 8:09 and go to lunch at 11:59, it will round to 8:12 and 12:00, making my time worked 3:48 or 3.80. Then I get back from lunch at 12:59 and leave at 17:14, which will round to 13:00 and 17:12, making my time worked 4:12 or 4.2 for the 2nd 1/2 of the day and 8:00 or 8.0 hours for the day.
Time In----------Time Out----------Total Time----------Decimal Time----------Total Hours
...8:12.................12:00..................3:48......................3.80
..13:00................17:12..................4:12......................4.20..........................8.00
The problem is I want to write the actual time and not have to round everything myself and yet I need the decimal time to match what my time clock actually calculates from.
My current formula for the decimal shown above as 3.80 is this: =(HOUR(F7)*60+MINUTE(F7))/60
My current formula for the total time for the day (regular hours) is this: =IF((((E7-D7)+(I7-H7))*24)>8,8,((E7-D7)+(I7-H7))*24)
My current formula for overtime is this: =IF(((E7-D7)+(I7-H7))*24>8,((E7-D7)+(I7-H7))*24-8,0)
This is not a time clock, it is my personal copy of what my time for the week was/is, so that I can compare it to the actual time card that I have to sign off on.
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies View RelatedI have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
Here is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).
It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.
At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3
For that I had wrote the program which is below
Private Sub CommandButton5_Click()
Dim i, j, k, m, n As Integer
i = ListBox1.ListIndex
j = Sheet2.Cells(1, 39).Value
k = j - i
[Code] ....
When I click the delete commandbutton5 the result is as shown in figure below
In sheet2
In sheet 3
For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.
I have a macro that would run once the workbook is opened. This macro would then open another excel file to get updates then close it. Now this file is also being accessed by other persons in the network but just for a split second. Since an opened file would result into an error, what proper codes should I add so that if the file is currently in use, the macro would then run again after 5 seconds and would do the same thing until the file is ready? This is what I have so far. All in the standard module.
Sub Updater()
Dim updatePath As String
updatePath = Worksheets("Entries"). Range("E104")
Application. ScreenUpdating = False
Workbooks.Open (updatePath)
On Error Goto Errorhandler
Workbooks("APTupdater.xls").Close True
Application.ScreenUpdating = True
Exit Sub
Errorhandler:................
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies View RelatedCreate a cell with running time in Hours, Minutes, and seconds, in 12:00:00 AM format.
View 13 Replies View RelatedI want to know if I can schedule a macro to run at specific times?
If so would 6 requests at the same time slow excel down?
I have a macro which downloads data from website. But takes some more time to complete a work. I want that a time should display at the bottom bar of excel where "Ready" is written. THe time should be in hh.mm.ss format.
View 9 Replies View RelatedI wanted to run a macro at 08:00 each day. I tested the macro would auto start and run, and set the test to start at 13:00.
In the Private module of the Workbook I put
Private Sub Workbook_Open()
Application .OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
and in a standard module
Sub TestTimeMacro()
Application.OnTime TimeValue("08:00:00"), "MyMacro"
End Sub
Initially I had the TimeValue set as 13:00:00. The test worked OK so I changed the timevalue to 08:00:00.
The macro now runs at 08:00 and 13:00.
How do I stop the 13:00 event?
I have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.
View 9 Replies View RelatedHere is the code for my user form.
Private Sub UserForm_Initialize()
TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
I have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?
View 11 Replies View Related