I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?
View 4 RepliesI have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?
is there a way to add an hour to the cell?
* Need a normal date calculation according to selected time zone. * Formula required in [D7], facing problem in Negative TimeValue.
View 7 Replies View RelatedI've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.
Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.
Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm‎
I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
In a particular month, I have some transactions with a consumed date. If the time falls at 12.00 AM in the end of the month, then the transaction goes into the next month. Below is an example:
3/25/2009 12.00.00 AM
4/1/2009 12.00.00 AM
I want all the transactions that fall on 4/1/2009 due to 12.00.00 AM to convert to 3/31/2009.
Need to Change date and time Format.
23 June 2013 14:02:10 BST
" 23 June 2013 00:47:58 BS"
23 June 2013 13:22:21 BST
23 June 2013 13:22:21 BST
Find the attached dump : jlr.xlsx
Required Output
06/23/2013 14:02
i am trying to make one cell automatically change to current date and time when the cell next to it has changed value. ive search other posts but cannot figure this out. so if cell A1 changes value cell B1 should automatically fill with current date and time cell A1 changed value.
View 9 Replies View RelatedI have a workbook with 120 LOI worksheets that all tie to one master data sheet, and I need to know the date and time of the last change on each worksheet and not the date and time of the last save. The date and time could either be located in a worksheet cell or in the individual worksheet header
View 4 Replies View RelatedI have an excel worksheet to display all debtor amount and create date.
When the create date compare with system date which is over 90 days, the debtor amount will be deducted and bad debt amount increased.
How should I use VBA to work out this? The debtor and bad debt are in 2 worksheets.
I am looking for a formula or VBA that will be in each in cells D5:D300 and will look at the value entered into the cell in column C and change the 4 digits into the date and time in the same format as NOW() returns.
Example
2045 becomes 17/02/2012 20:45
But I would also want it to see if the 4 digits that represent the time are after 14:00 and before 00:00 then the date would be the date in cell A1-1
example
Cell A1 18/02/12
2045 becomes 17/02/2012 20:45
REQUEST 1
What I need is lets say I have 3 columns Name, Date & Time
Name field has a drop down menu having a list of names
Now what I need is - lets say from the dropdown menu someone selects a name - THEN at the same instance the Time & Date fields gets populated with the Date & Time of that update.
and that Date & Time shouldn’t change if someone selects the same or different name in the row below
Kindly assist in lay man terms as I am a novice to Excel
REQUEST 2
In this format what I need is like above , the start date & start time should update real time ONLY when a name is selected
and when the End date is selected the End time , Date Elapsed & Time Elapsed should Populate automatically.
However there should be NO effect if data is entered or changed in the Request Id or Issue Cells - basically the triggers should only be Name field & End date Field
Can you attach an example sheet as well please
Have enclosed an sample attachment
I work in a sales team, and am currently planning the new year of sales spreadsheets (tracking prospects and orders) These spreadsheets are linked in both directions to the Sales Director's summary spreadsheet (so that she can set the targets, and also provide a summary to the MD). She has asked me whether it is possible to put a formula in that gives the date each line (1 line = 1 prospect) was updated (so that she can see whether information in the line is current / a week old / a month old etc)
Effectively, what I need is in column A a formula which references columns B-Q and if any of those change, puts in the date of change. Is this possible, or am I going to have to ask the sales guys to do it manually? I have tried to use the =Now() function, but, because the spreadsheets are linked, and auto-update on opening, every time the spreadsheet is opened, each line goes to today's date.
The previous threads that I looked at suggested either: volatile time stamp in shared workbook
or
That is bad design, Enter =NOW() to a single name cell named cell and use date =MyD-T in ALL cells needing the Date & Time. Where MyD-T is the named cell. I would advise STRONGLY against using Manual Calculation as it's NOT good spreadsheet design and a mistake waiting to happen.
Let's say I have column C blank, but every time it's filled in with something I want column A to be today's date and B to be current time. Unfortunately, the functions NOW() and TODAY() don't give me what I want. They get recalculated every time that I update the spreadsheet.
Another thing that I can do is just press ctrl+shift+; to generate a non changing date/time, but I want it to happen automatically (being super lazy).
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedI have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?
View 11 Replies View RelatedI have a spreadsheet that has Zip Codes by Service Days, and then I have another Spreadsheet Zip Code Ranges and the Zone they fall in. I want find the Zip Code associated within that Zone for the Zip Code. I listed some data below.
Zip Code Spreadsheet
State Destination Zip Service Days
NY 12095 2
Zone Chart
From Zip
To Zip
Zones
[Code].....
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I have a zone matrix I'm working on. How can I have a formula match the state and return the numeric value assigned to the state?
Say I enter WA in cell "G5" and in column A I have the states and column B has the numeric value assigned. I need to to match and return the value.
So if "OR" is entered the returned value is "1"
StateZone
WA1
OR1
ID1
[Code]....
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I'm trying to write a VBA code for converting the date/time as text to a date/time value.
The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM
I could have the code working fine with the first two types, but not the last one.