I have a spreadsheet that has Zip Codes by Service Days, and then I have another Spreadsheet Zip Code Ranges and the Zone they fall in. I want find the Zip Code associated within that Zone for the Zip Code. I listed some data below.
Zip Code Spreadsheet
State Destination Zip Service Days
NY 12095 2
Zone Chart
From Zip
To Zip
Zones
[Code].....
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
I have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?
View 11 Replies View RelatedI have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?
is there a way to add an hour to the cell?
I've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.
Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.
Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).
I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?
View 4 Replies View Related I have a zone matrix I'm working on. How can I have a formula match the state and return the numeric value assigned to the state?
Say I enter WA in cell "G5" and in column A I have the states and column B has the numeric value assigned. I need to to match and return the value.
So if "OR" is entered the returned value is "1"
StateZone
WA1
OR1
ID1
[Code]....
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm‎
I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
I need a courier rate returned based on the zone and weight of the shipment. The rate table has 10 zones (B1:K1) and 12 weight classes (A2:A13)
In the sheet "data & result" I want the cost returned in the yellow cells from looking up the weight (D) and zone (C).
* Need a normal date calculation according to selected time zone. * Formula required in [D7], facing problem in Negative TimeValue.
View 7 Replies View RelatedI have been trying to write two formulas in one cell. I have been able to write them both separately but have been unable to join them both together. What I am trying to do if first search name them how many reoccurring numbers appear. I have provided an example below
a b c d
1 Tom 333
2 Sam 22
3 Sam 22
4 John 5
5 Sam 22
6 Sam 1
7 Tom 3
8 Tom 333
So the answer would be
Tom = 2
Sam = 2
John = 1
I have two columns, zipA and zipB. There are over 7000 rows and I need to calculate the distance between zipA and zipB for each row (so the result should be over 7000 rows of distances (in miles)). I posted this in the programming board because I figured it would require some. I don't have any add-ons.
View 14 Replies View RelatedJust starting to learn VBA. I have the 2 following codes.Can they be combined into 1 code.I have 2 buttons one say hide rows and the other button says unhide rows....can 1 button be used and when the rows are visible the button says hide rows and when the rows are hidden the button says unhide rows
Sub hiderows()
ThisWorkbook.Sheets("sheet1").Rows("3:12").Hidden = True
End Sub
Sub unhiderows()
ThisWorkbook.Sheets("sheet1").Rows("3:12").Hidden = False
End Sub
At my last job we purchased a zip code addin from spheresoft that could give you a distance between two distance ie: =ZipCodeDistance(zip1, zip2)
This worked well but I am now at a new job and wondering if there is any data out there that could help me build my own sheet. I just need California
I have both zip codes now just need the distance, I could sit down, drink a ton of coffee and enter zip codes all night into Mapquest but am hoping for a better way.
I have a spreadsheet containing data in coloumns A to L.
Where all the codes in column B are the same then a border must be placed around all the codes that are the same i.e the border must start in Column A and end with column L.
provide me with the code the will put borders around the codes in column B that are the same ...
I have written a VBA code.
I thought I could just save it as an ADD-IN and then have my colleagues to add it, but that does not work. The macro will be stored in a seperate workbook and that is not what I want. I want them to be able to open any workbook and want them to be able to run the macro. I.e. everytime they open a workbook the macro should be available and be ready to run.
VLOOKUP returns incorrect results when comparing zip codes across worksheets. I think the problem could be caused by 2 things:
1. There are duplicate rows in the lookup_value range because each represents an individual and needs to remain a duplicate to show whether there are multiple individuals from the same zip. In these cases, VLOOKUP only returns the first matching zip from rows containing duplicate zips. (See 07042 in worksheet 1 of the file linked below.)
2. Zip code format is not being treated as a number during sort. Do I need to use a different format during sort? Don't want to lose the leading zeros on the zips.
I am looking out for a macro by which i can combine multiple PDF's into one through excel using vba codes.
Please note that:
> all these PDF's are in one folder
> the code needs to be dynamic (i can have an option to combine selected PDF's
> i am working in excel 2007
> i have acrobat 8.0 installed
I have names in the following format in Column A: e.g.
Mr. Doe SmithSmith DoeJr. Doe SmithJr. Smith DoeMiss Abc XyzMrs Abc XyzXyz Abc
I want a VBA code that would turn all different formats of names listed above as:
Doe Smith
Abc Xyz
I also want another code that would turn above formats as follows: (by the last name)
I have a database where each subject has data for 4 days and a number of different codes each day. I am looking to calculate how many different codes they have on day one, how many unique codes they have on each subsequent day and the sum of all these codes.
For example, in the data attached:
Subject 10002 = 2,1,0,0 (3)
Subject 10005 = 3,1,0,0 (4)
Subject 10009 = 3,1,1,0 (5)
I have an excel workbook with two worksheets. The first worksheet contains a lot of data with more than 20.000 rows and 20 columns. The important part is that there are two different columns (column F and I) containing codes of items. What I would like the macro to do is the following:
write codes of items in the second worksheet column B under each other. I would like the macro to lookup the codes from this column in the first worksheet (column F and I) and if it finds then display in worksheet 2 column C the column in which found it on worksheet1. So basically I write on worksheet2 column B many many codes and then I press a button to do a search and displays next to the items (in column C) if it found the code in worksheet1 column F, or column I or both, or did not found it.
I have the following seven codes used to fill a ListBox with data retrieved form a range (DACNRange).. they are almost the same .. the only difference between them is the range column number (highlighted with red). Instead of these seven similar codes, Can we create a general code replaces them all?
View 2 Replies View RelatedCity, state 29785
city, state 29767
city, state 29719
I need the zip codes to be pushed to the next column, to column 'D' to be exact. I already tried using the "text to columns" function. I selected "delimited" file type and used "2". it pushed the data to the next column everytime there was a 2. The problem is, there are 2's in the middle of the zip code sometimes. Also, it gets rid of all the 2's. Also, I can't use the "fixed width" option because there are some city/states that have more letters in them obviously, so the column is not a perfect width.
I am just thinking if there is a way to delete or hide all vba codes as I dont want readers to see them.
View 4 Replies View RelatedHow to merge two codes too allow (2) functionalist
I have a rather complex situation that I'm not sure how to handle. First let me provide some background on what I have accomplished thus far.
Background: I have an excel file with two worksheets. Worksheet two, named Data, is where all my data is located. It begins with A1 going through JC4 (A1:JC4). However, for the purpose of my project the data I'm concerned with starts on E1 through JC4. Also, every other column is formatted with ="".
I have used the following sequence of commands, obtained from a website, to make it much simpler to define name ranges:
Select the worksheet "Data"Select cell A1Select the current region using CTRL + SHIFT + 8Press CTRL + G to bring up the Go To dialog boxClick on the "Special" button to bring up the Go To Special dialog boxSelect "Constants" and press the ENTER key (or click the "OK" button)Now define the Named Ranges using your selection by pressing CTRL + SHIFT + F3Excel will ask you to "Create names from values in the:" Make sure only "Top row" is selected, then press the ENTER key (or click the "OK" button)Check that the correct named ranges have been defined by opening the Name Manager with CTRL + F3 While I have defined named ranges with the above steps, this is not the same as a dynamic named range. At least I don't think its the same thing.
I have also protected the worksheet to prevent anyone from changing the formatting. Note: the top row of each column that contains information has been designated as the name for the information that comes after it (see step 8 and 9 above). Now, my first worksheet is where I have created conditional drop down screen by using data validation. The drop down screen are conditionally formatted. Meaning depending on the selection from the drop down screen in cell E27 will determine the list on the drop down screen in cell F27, and so on through cell H27. Furthermore, the drop down items on:
1) Cell E27 (in the first worksheet) are located on the second worksheet in cells E1, G1, I1, K1. Each of those columns have a list of items that fall under them.
The lay out of the data worksheet is too combursome to list out, but I have attached a picture. IF you follow the data you will see some of the information is listed in two cells, for conditional formatting purposes. I have also attached a picture of worksheet 1 with the drop down screens.
Code 1: (allows the selection of multiple items in one cell separated by a comma)
Developed by Contextures Inc.
' www.contextures.com
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
Dim newVal As String
Dim lUsed As Long
[code]....
Code 2: (allows for manually adding directly to the drop down list a new item that is not on the list. It will then add it to the list after the hard entry directly to the drop down menu). Remember the list will be on the Data worksheet, worksheet #2. The drop down menus are on the first worksheet).
' Developed by Contextures Inc.
' www.contextures.com
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
Dim ws As Worksheet
Dim i As Integer
Set ws = Worksheets("Lists")
[code]....
I have added the first code by right clicking on the worksheet and viewing the code, then adding Code 1. It works beautifully.
What I'm trying to figure out is how to add Code 2 to the mix with out unding Code 1. I'm trying to either combine the codes or insert the second code without disrupting Code 1. Remember I have already created a defined name range in my Data worksheet for all my columns/information. I tried deleting Code 1 and only inserting Code 2 but it didnt work. Code 2 does not work based on how I have designed the formatting. How do I apply Code 2 to what I have done thus far? Can this be done by bypassing a dynamic name range, since I have already assigned a defined name range? I want both codes to apply to Columns E, F, G, and H on the first worksheet.
I have a list of UK Post Codes that I wish to filter but because of the format I'm getting problems.
The reason is that I'm only interested in the first part of the post code.
Example: Using IP7 6NH and IP32 8LR. If I tried to filter those using greater than then Excel would treat IP7 6NH as larger then IP32 8LR because 7 is larger then 3.
The post codes are all imported from another piece of software and are always in the format of 3 or 4 chracters, then a space and then 3 more chracters. I wish to create another column which only has the first part in it. So I wish to crop IP7 6NH down to just IP7 and IP32 8LR down to just IP32.
Then I want to make a further column which looks at the value in the first new column and returns "In" or "Out" based on some conditions.
These are the conditions. If the cell begins with CO or NR or CB or CM or PE, regardless of the rest of the value, then "Out" should be returned. If the value is between IP1 and IP6 inclusive then "Yes" should be returned.
If the value equals IP7 then "No" should be returned
If the value is between IP8 and IP17 inclusive then "Yes should be returned.
If the value is between IP18 and IP29 then "No" should be returned.
If the value equals IP30 then "Yes" should be returned.
If the value is bewteen IP31 and IP33 inclusive then "No should be returned"
I'm think that it's quite complex and maybe the way to go would be to have two other columns, one containing the "In" values and the other containing the "Out" values, that a formula can refer to when making it's yes or no choice but I don't know how to do that.
I need a macro that displays a msg box when the user hit Delete on the keyboard. "The msg box will display/
"Are you sure you want to delete the selected information? This information might not be recovered.
If you delete it now the undo button in the toolbar could recover the information if activated prior to any other input.”
I have sheet from 1st to 31st of the month wherein I feed the employees details in codes or legends. I need to count certain codes as detailed below: ....
View 9 Replies View Related