How To Have The Average Without Empty Zone

Jun 6, 2007

I have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?

View 11 Replies


ADVERTISEMENT

Average & Sum Function With Empty Cells

Jun 8, 2007

I have data in Column A as follows:

A1 15
A2
A3 20
A4 56
A5 45
A6
A7 71
A8
A9 23

where cells A2, A6 and A8 are empty.

I want to be able to AVERAGE or SUM the first four nonblank cells. I know I could manually select the cells, but I have a spreadsheet with 30 columns and 40 rows, and the data (including empty cells) in each column is different.

Is there a single formula that will find the first four nonblank cells and then perform the AVERAGE or SUM function?

View 9 Replies View Related

Average Formula With Empty Cells

Mar 6, 2008

I have a grade system where I need to obtain an "Average" of grade data within four cells. At time there may onlt be two cells with a value or three. Example: The cell cell cantain a value of 100 points with the totral of 400 point. AS we know the "Average" would be 100 points. But is only two cells cantained 100 point and the other two where empty then the "Average" come back as 50 points. Because I have 4 cells that requires a value input. So my question is how do I create a formula that will give the correct value for the "Average" of data that is placed in the cells. The values are calculated as a total from the grades entered. That total is in F14, F31, F48, F65 - Now if F14 has a value of 100, and F31 has a value of 100 then the "Average" should be 100, but it is not for the is calculating F48, and F65 as 4 values, so the return is 50. The situtation is that I need all the cells for in some cases data will be necessary, but I need the "average" to be calcalated for only the values entered.

Where is the Formula.
=IF(SUM(F14,F31,F48,F65)=0,0,AVERAGE(F14,F31,F48,F65)) - My brain says this is simple but no matter what I do it returns 50.

View 9 Replies View Related

Ignore Empty Cells In Calculating Sum And Average

Oct 11, 2013

i get a problem in preparing a roster i went to ignore blank cells in calculating rank. and also i went to make the sum to be empty is one of the cells in a range is zero

View 1 Replies View Related

Count/Average Number Of Specified Name Where Corresponding Cell Is Not Blank/Empty

May 1, 2008

sumif problem but it wont work with a countif or average if.

Column A has various names and Column B has amounts, what I need is to count the number of occurances "John Smith" has an amount in Column B. The previous formula I tried was

=sumif(A:A,"John Smith",B:B) but with either countif or averageif it errors too many arguements.

I wasn't sure if Dcount or an array would be suitable but have not used them before.

Pivot tables I'm sure will be the future with this but haven't got to the foot of that mountain yet.

View 4 Replies View Related

Prevent #DIV/0 Error In Average When All Cells Are Blank/Empty

May 19, 2008

I'm looking for a function that will display the average of a row of cells, while at the same time not displaying any error messages. It's easy to average cells without blank values, but to combine that with no errors is difficult for me. I saw many ways to do the average, one of which is:

= SUM(A1:E1)/COUNTIF(A1:E1,">0")

That function doesn't work for a row of blank cells (i.e., hidden rows), though. The result is an error message.

I also read about a way to ignore an error in a computation:

=IF(ISERROR(F1),"",F1)

The problem is when I combine those functions I get a blank cell no matter which function I put first, and without regards to cell values or not. The reason I want this to be error-free is that I have to average the "average column" at the bottom of the table, too (i.e., F100).

View 9 Replies View Related

Time Zone Change?

Dec 30, 2011

I have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?

is there a way to add an hour to the cell?

View 2 Replies View Related

Finding Zip Codes Within A Zone?

Apr 18, 2013

I have a spreadsheet that has Zip Codes by Service Days, and then I have another Spreadsheet Zip Code Ranges and the Zone they fall in. I want find the Zip Code associated within that Zone for the Zip Code. I listed some data below.

Zip Code Spreadsheet

State Destination Zip Service Days
NY 12095 2

Zone Chart

From Zip
To Zip
Zones

[Code].....

View 5 Replies View Related

Time Zone Offset Calculation?

Apr 2, 2014

I've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.

Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.

Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).

View 4 Replies View Related

Change Date Time Zone

Feb 15, 2009

I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?

View 4 Replies View Related

Match Formula For Zone Pricing?

Dec 15, 2011

I have a zone matrix I'm working on. How can I have a formula match the state and return the numeric value assigned to the state?

Say I enter WA in cell "G5" and in column A I have the states and column B has the numeric value assigned. I need to to match and return the value.

So if "OR" is entered the returned value is "1"

StateZone
WA1
OR1
ID1

[Code]....

View 2 Replies View Related

Creating A Time Zone Userform

Jul 29, 2008

I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).

I am trying to work out what would be best.

Would it be possible to create this on the Status bar?

Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.

View 9 Replies View Related

Running Clock In Excel With Different Time Zone

Nov 28, 2013

Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.

VB code I used to display current system running clock

Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then

[Code] ......

Attached File : Time.xlsm‎

View 3 Replies View Related

Time Zone Conversion - Morning Or Night Shift

May 6, 2014

I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.

For example:

Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.

Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.

The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.

View 4 Replies View Related

Freight Table - Weight And Zone Lookup Return Cost

Mar 4, 2014

I need a courier rate returned based on the zone and weight of the shipment. The rate table has 10 zones (B1:K1) and 12 weight classes (A2:A13)

In the sheet "data & result" I want the cost returned in the yellow cells from looking up the weight (D) and zone (C).

View 2 Replies View Related

Converting Time Values From One Time Zone To Another?

Sep 3, 2013

* Need a normal date calculation according to selected time zone. * Formula required in [D7], facing problem in Negative TimeValue.

View 7 Replies View Related

Filling Empty Cell Value Based On If Else Condition And Delete Row More Than 2 Cells Empty

May 23, 2014

Here find the excel file

My requirement

1) 4 values contains in each row based on the values from those cells the max value will display.

2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.

3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.

View 1 Replies View Related

Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?

May 8, 2014

I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.

I am using code similar to the below:

[Code] .....

View 5 Replies View Related

Delete Empty Rows And Empty Columns From Word Table

Mar 25, 2014

I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.

Find the attached sample excel sheet and the word documents.

DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎

View 2 Replies View Related

Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

View 9 Replies View Related

Is A Cell With A Formula Considered True Or Is It Empty If The Criteria Is Empty

May 30, 2009

Is a Cell with a formula (like shown below) considered true, or is it empty?

=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?

If Scorecard!$B$13 was True...
A cell with the above formula would be True.

View 9 Replies View Related

Hide Blank/Empty Rows & Shown/Unhide Non Empty Ones

Sep 3, 2006

I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.

View 9 Replies View Related

Make Formula Cells Empty Rather Than Empty Text

Apr 17, 2008

Is it possible to make a cell "really" blank/empty based on an If statement? For instance:

=if(a1>10,a1,"")

Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.

So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.

Is there any way to tell Excel to make the cells truly empty?

View 3 Replies View Related

Average Column Of Cells But Ignore Errors And Return Average Of Numbers That Are There

Jun 14, 2013

E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).

E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.

I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.

View 14 Replies View Related

Deleting Empty Rows / Empty Cells

Sep 27, 2009

I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).

I tried this code but it doesn't delete all rows with empty cells:

View 6 Replies View Related

Code Only Deleting One Empty Row Instead Of All Empty Rows

Jan 22, 2012

I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.

The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.

Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer

[Code] ........

Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.

If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.

View 4 Replies View Related

Average And Vlookup: Average The Grades With Appropriate Names

Dec 9, 2008

i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.

=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?

View 5 Replies View Related

Remove Empty Rows Based On Range Of Columns If Columns Are All Empty (no Data) Delete

Oct 24, 2012

Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.

VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range

[Code].....

View 1 Replies View Related

Worksheet.function Average Returning Error "Unable To Get The Average Property Of The WorksheetFunction Class"

Jan 23, 2007

TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)

The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.

View 3 Replies View Related

How To Get A Minimum Average And A Maximum Average

May 23, 2014

Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.

I was going to create a summary page and reference column d.

The following just gives me the min, I want the min average if possible:

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved