Function In Spreadsheet Calculating Incorrectly
Oct 22, 2008
This is a two part question. I thank any help that can be given in regards to my problem. I have attached a spreadsheet similiar to what is used at work. We gather this information from a report we use.
Part one- in Column F, we have it set up to know how long the customer is deliquent. Column F is the difference between the date in column D and the date that is in cell E2. We are using the formula networkdays which will not count the saturday and sundays of the weeks.
The problem is, that sometimes when we place the information from the report, the value in column F is off a day, which causes us to have to adjust the formula so the information is the same. Why do we have to adjust the formula?
Part two - In the networkday formula, we do not want to include certain holidays, which is listed in column J. Is there a way to have the dates for the holidays auto advance if the dates in column J is less than the dates in column D?
View 14 Replies
ADVERTISEMENT
Feb 6, 2014
I have a several tabs that are each named the abbreviation for an element (i.e. Al, Sb, etc.) and I am trying to write a formula to display the full element name based on the name of the tab and a table in another sheet. I have written the formula below which works when I enter the formula and press enter on each sheet, but when I click "Calculate Now" to run the calculations for the whole file Excel will return the name of whichever element I last calculated manually (click in the formula and press enter) on every sheet. Why does Excel calculate correctly when I press enter but then change it when I calculate the whole file?
=INDEX(MCL!$A$1:$C$28,MATCH(RIGHT(CELL("filename"),LEN(CELL("filename"))-FIND("]",CELL("filename"))),MCL!$B$1:$B$28,0),1)
*the table "MCL" that it is looking in has the full element name in column A and the abbreviation in column B
View 3 Replies
View Related
Feb 19, 2008
I'm trying to Calculte the Averages of just the Teachers Salaries in my spreadsheet. If possible i would like to put the average at the end of each
of Teachers information.
Is there code that would allow me to do so.
I attached a sample file to view.
View 9 Replies
View Related
Mar 3, 2009
to know the number of hours between A5 and J5 of my spreadsheet - working day is 8.30am to 5.30pm also need excluding weekends and bank holidays in the uk. I need the result to appeer in K5. the date and time format i have is: 2009-02-04 - 11:56:39 in column a5 and 2009-02-16 - 14:23:45 in column J5
I have over 100 of these calculations to do per month and it takes me ages manually.
View 9 Replies
View Related
Jan 29, 2009
I have a dataset storing 6 numbers in a row (where each number range from 1 to 50 and no duplication of number within each row). Totaling there is 1000 rows ....
View 9 Replies
View Related
Jan 16, 2014
If I enter 1 in a cell, 1.1 below, select both and drag down, I should get a vector: 1, 1.1, 1.2 etc.
However, in the most recent instance of seeing this problem, at 6.5 I get 6.50000000000001! 6.6 onwards is then correct, at 7.2 the value is again incorrect in the 14th decimal place, and the errors continue intermittently through the sequence.
Is there a fix for this? It's extremely time consuming to have to check each auto-incremented array like this.
View 4 Replies
View Related
Nov 6, 2009
How do I combine these formulas for one cell?
=IF(H16170,"Check your Entry","")
=IF(I16215,"Check your Entry","")
=IF(J16190,"Check your Entry","")
=IF(K16240,"Check your Entry","")
If any of these four cells are entered incorrectly I just want the message displayed. I put this formula in the cell I want the message displayed:
=IF(H16170,"Check your Entry",IF(I16215,"Check your Entry",IF(J16190,"Check your Entry",IF(K16240,"Check your Entry",""))))
That works except "Check your Entry" is diplayed until all four cells are filled. I don't want the message displayed with a zero value.
View 9 Replies
View Related
Nov 18, 2013
I've recorded a macro in which I unhide certain columns, copy and paste some information then hide those columns again. The problem is that when the macro is finished, it incorrectly hides columns K to AN. I did not record that and it's not in the code so I'm lost as to why it's happening.
The macro is as follows :
Code:
Sub COPY()
'
' COPY Macro
'
'
Application.ScreenUpdating = False
Columns("K:BT").Select
Selection.EntireColumn.Hidden = False
Range("M5:N24").Select
Selection.COPY
[Code]...
Why it's hiding everything from K to AN. I've tried recording the macro several times but it's just not working, no matter the order in which I hide columns when recording it.
View 5 Replies
View Related
May 23, 2007
to getting accurate regression coefficients from a dataset with *small* (standard) numbers, which contains centered predictors. More specifically, I have a dataset with 18 observed data points containing a criterion (y), a centered predictor variable (x), another centered predictor variable (z), and the interaction of the two centered predictor variables (xz). This multiple regression equation is structured to test for interactions between the two continuous predictor variables (x and z) as prescribed by Aiken and West (1991) in their classic book.
When I run the regression in Excel with the centered predictors, some of the regression coefficents in the output are estimated to be 0, although they are clealry *not* 0 as estimated by SPSS 14.0.2. I have spent many hours troubleshooting this problem (and searched many forums on the internet) and still do not know why this is happening.
Initially, I thought the problem might have to do with the cross-product of the centered predictors, but even just doing a regression with one of the centered predictors (for certain centered predictors) yields a regression coefficient of 0 (although it should be non-zero as per SPSS 14.0.2). When doing these multiple regressions with non-centered predictors, all regression coefficients are estimated accurately.
I was wondering if anyone had any insights on why I am experiencing these problems.... If anyone wants a sample of some test data I have used to troubleshoot these problems, you can download a file from: [url] and/or email me at (email deleted by Mod) for more datasets or questions.
View 5 Replies
View Related
Sep 24, 2007
im currently working on a spreadsheet that tallies financial information for a few national conferences we are hosting at work. It is structured along the lines of below:......
The total is calculate using the SUM function. For sum reason the SUM function has stopped working in one of our columns. Example, if you take the above example, the SUM function for the income is working, but the SUM function for Expenditure comes up with $ - What does this mean? There are no weird values in any of the cells, the formula is exactly the same as the income column, i just don't know where it has gone wrong?
View 3 Replies
View Related
Jan 17, 2014
I entered exactly 113,876.92 in cell L16 I entered exactly 113,390.02 in cell L17 I entered =L16-L17 in cell L18 L18 incorrectly shows the result at 486.9000000000009000 (note the extra "9" after the 11 zeros). When I expand the viewable digits on L16 and L17, they have ALL zeros after the cents. (I went out at least 25 digits). I can't be the first one encountering this.
View 4 Replies
View Related
Mar 14, 2014
How is MOD function used for calculating duration between two timings.
View 3 Replies
View Related
Apr 16, 2014
Excel function or macros for calculating the average of waterSD column where the TT column is less than or equal to 100(red markings). functions like IF TT IS LESS THAN OR EQUAL TO 100, THEN CALCULATE AVERAGE OF WATERSD....
I had done manually on the right side in the attached excel sheet. only those yellow markings.
Because already I have some macro which do this process but it is not accounting for the TT column less than 100. it starts from 200 TT values. but i need to include 100 TT also. That's is where now we have yellow markings. I will provide you the macro code if you can edit that where it will start calculating form 100TT value, it will be really great. The code is,
[Code] .....
Attached File : average for watersd OF 100TT.xlsx
View 3 Replies
View Related
Feb 27, 2014
I'm having problems with a custom VBA Function, regarding with the automatic calculating values.
Basically i have a function that receives an input parameter, cell address, and returns a string, changing the cell value.
View 4 Replies
View Related
Aug 11, 2012
I am using excel 2007. I am trying to calculate the internal rate of return, without creating an array. I figured out that I can use the rate function to give me the same answer as the IRR function if I have one payment stream of say 36 months @ 1000. Where I am an running into trouble is if I have second payment stream of 6 months extension of 1500. Rate # pay 36 amt 75 PV = 5000 FV 500 , How to handle the the last 6 months ?
This is the situation
asset costs is 5000
monthly lease is 75 for 36 months
extension for 6 months is 125
end of lease buyout is 500
what is the internal rate of return without creating an array.
View 4 Replies
View Related
Jun 22, 2012
Is there a simple function for calculating the number of months between 2 dates.
Eg 1/5/2012 - 8/9/2020
View 1 Replies
View Related
Jan 26, 2009
I have a spreadsheet that looks like this:
A B C
### ###
### ###
### ###
I am trying to figure out a function to find the median of Column B of the ones that have a column C greater than 1.
I need (some how) to filter out the column C that are greater than 1 and then take the median of those left.
View 11 Replies
View Related
Apr 22, 2013
Is there a command/formula that will automatically put the progressing date in the tabs of the sheets? Like if I am doing a spreadsheet containing 52 sheets for all the weeks of the year, is their a way I can label the first tab 1-1-2013, and then excel will auto label the remaining 51 tabs when I hold the control key, click/hold cursor and drag the sheet to make another? otherwise I am going to have to manually enter around 1000 dates for the tabs.
View 2 Replies
View Related
Feb 10, 2009
I am trying to get a function (sum) of several cells to be automated in a monthly spreadsheet. I can get the function to work, but how do I get it to Autofil? The syntex seems to call for a range, which will be different every month. I can't figure out how to loop it, so I thought autofill would work.
View 3 Replies
View Related
May 1, 2014
I have the macro below which opens csv files stored in a user selected folder and processes them changing the date format in column D from DD/MM/YYYY to text stored as YYYY-MM-DD.
For most of the dates the code works without issue, but for some (those with a month <12 possibly) it transposes the MM and DD incorrectly.
I understand that when opening the CSV's in excel it automatically converts the dates to DD/MM/YYYY, so I'm actually opening in wordpad which displays as YYYY-MM-DD, with only a portion being incorrect.
I've attached a couple of sample files (pre and post conversion).
Status_20post.csv
Status_20pre.csv
View 9 Replies
View Related
Jan 23, 2012
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies
View Related
Jan 4, 2010
I have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
View 4 Replies
View Related
Aug 11, 2013
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
View 6 Replies
View Related
Jun 26, 2008
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies
View Related
Feb 6, 2009
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
View 3 Replies
View Related
Jan 13, 2010
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
View 13 Replies
View Related
Apr 7, 2014
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
View 3 Replies
View Related
Mar 11, 2012
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies
View Related
Apr 14, 2007
It also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies
View Related
Apr 2, 2014
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
View 6 Replies
View Related
