Get Userform With Search And Update Functions To Work?
Mar 27, 2014
I came across a userform which was perfect for my needs, as I only had to create additional fields, which I did and have attached. However, since I have more than 10 fields, I was getting an error with respect to the listbox function, where it stated that the list property could not be found. I gathered from the searches I did, that this is the max limit for this particular function. I have been unsuccessful in finding a solution, partly because I don't know very much and I'm not understanding how to incorporate some of these solutions into the vba code. I've created simple userforms before, but this one is a little more advanced than my current capabilities.
View 2 Replies
ADVERTISEMENT
May 9, 2013
I have a userform for data entry. I am able to make codes for Add ( Add entry to database), clear ( Clear userform ) , Cancel (Exit userform). I have some more buttons and functions to be assigned to them but not able to write code .
Need codes for :
1) Have search box which searches Mat id in the complete database and returns value in the search result listbox. When we click on the result in listbox , the userform values are filled with the values that the mat id has . Then if user wishes he can update teh details for that mat id , and click on update button . the data is updated in the database. Or he can delete the entry from database by clicking on delete button.
2) Have arrows which will navigate through database ( need macros for that ) .
USERFORM.xlsm
View 5 Replies
View Related
Feb 17, 2010
Not sure if I am linking this correctly but here it goes...http://www.excelforum.com/excel-prog...ification.html
This is a previous post link that is now solved but I have a new question based on the code in the post. I would like to know how to add a search and update ability to the user form I have created. I am newb with user forms so I apologize in advance for my lack of knowledge.
And yes I know the way it is set up now it is depositing data in two different locations; this is for a specific purpose.
View 14 Replies
View Related
May 6, 2014
I have developed a functional User Form that works like a charm. The form will Add New Records to my database and Get Next and Get Previous records. This all works like a charm. I am stuck on how to search by Last Name or Employee Number and then to Update the Existing Record. If I change anything in an existing record as the VBA is written today, my only choice is to add a new record to the end of the database. I have added Command Buttons, but I'm lost as to how to write the code. Here's what I have so far:
VB:
Dim currentrow As Long
Private Sub cmdGetNext_Click()
Range("A2").Select
ActiveCell.End(xlDown).Select
lastrow = ActiveCell.Row
[Code]...
View 6 Replies
View Related
Dec 29, 2007
I need a code for vinculating a user form and perform some searchings on a excel database.
For further details see attached file.
I created a user form in which some infromation is requested in order to search on excel database, I need a macro to search, display and update this data/information.
As an example, if i need to find the part number "C23138810-1" using the button search database and contains or match options, then displays all the information on the user form, this information is located in the same row where the part number is. Then, if some change is required, update is by clickig button "Update Data", and then if require "find next" item to review or update.
View 9 Replies
View Related
Jan 5, 2014
Is is possible to Update the master sheet with data from sub sheets in one click? Let us say we have one Master Sheet and Three sub sheets with name A, B, C. I would like to have excel function on Master sheet or Update button on Master sheet by which if i click on that it should copy all data except labels from A, B, C to Master sheets and also while copying one column should get auto filled based on from which sheet the data been copied. For example- If 10 data copied from A sheet on column X should show A, if data is copied from B, it should show as B...
View 1 Replies
View Related
Jan 29, 2014
I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
I am using Excel 2011 for Mac
View 7 Replies
View Related
Jan 13, 2009
I created a user defined function and using Application.Volatile to update sheet automatically.
But this slowing down my sheet execution alot.
When i remove that it doesnt take much time but no automatic update.
View 9 Replies
View Related
Jul 16, 2009
I have 2 worksheets - Data & Reference.
in Reference worksheet, have 2 columns - Cards & State
* Cards column contains a listed points which will be added from time to time. The points can either be a word or part of a sentence etc.
* State column contain various general category
Table Example in Reference worksheet
Cards- State
MBB Visa- Classic
CitiBank Visa- Gold
Diners- Classic
Amex Corp- Platinum
MBB Mastercards- Gold
DirectAccess Persona- Gold
CitiBank Mastercard- Platinum
Amex Persona- Gold
DirectAccess Corp- Platinum
in Data worksheet, have 2 main columns - Remarks & Refs.
* Remarks column contains all sorts of data. The rows can be more or can be less day by day.
* Refs column will auto refer to specific reference.
Table Example in Data worksheet
Remarks- Refs..................................
View 7 Replies
View Related
May 25, 2007
I have this search function that works well: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok") my E9 cell contains the phase: "I have a number which is < 9, and which is positive..." E9 has "which is < ", then i get back "test ok"
My question is.... how can I do this multiple times within the same function/cell. i.e. if I wanted to search "which is < " and/or "positive" in the same cell, then i get back "test ok", "positive number") I keep trying all combinations to no avail, like: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok"), =IF(ISNUMBER(SEARCH("positive",E9)),"positive number", "no good")
Keep in mind I am using a numeric example, although I am using this function to check if part of a cell matches specific text...
View 6 Replies
View Related
Jun 30, 2013
Is there any excel-addin which offers function in which you could search any excel function (not just formula) so that you could access any function in a seconds, just like google desktop search for windows.
Right now you could use quick access for most common functions you use and shortcuts for functions in different group. But if there is universal search for all the functions, it is going to be faster for any access!
View 2 Replies
View Related
Dec 23, 2013
I have an excel file with a large amount of employee data in it and want to create a search facility that will run on variable search functions and display the information on the screen
I want to be able to enter variable search functions as follows:
Employee Number; shows all information on employee
Division: shows all employees in division (possible from a list of all divisions)
Appraisal Eligibility : Applicable shows all the applicable employees
Job Role: shows all the employees with the same job role (possibly from a drop-list of all roles)
I know its easier in Access, but all records in Excel as a legacy and don't have time to create an access database currently.
View 1 Replies
View Related
Jan 19, 2014
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
View 7 Replies
View Related
Feb 27, 2009
I am trying to get a formula to work where it will search a single cell (on a sheet called "Calls") to see if a particular code is in there, if so return a value using HLOOKUP from a table on a sheet called "Values". The problem I am having is how to use the wild card etc because everything I have tried returns an error...
The code I am trying (Without wild cards, because they all failed) is...
Code: ....
View 10 Replies
View Related
Jul 4, 2009
I've been working on a database for a Dutch nursing home, but I'm struggling to get it to work. The file provides for a userform that enables users to search for residents and retrieve their appartmentnumber and the adress of their legal representative.
This userform consists of three parts; in the first, the user can type the full or partial name of the resident of interest in a textbox; in the second phase, all matching registrations are presented in a listbox; and in the third phase, a macro searches for the name selected in the listbox and retrieves the corresponding appartmentnumber and adress.
The first two phases of the userform work fine, but in the third phase, the macro fails to find any matches even though it is practically the same as the macro used in phase 1.
View 2 Replies
View Related
Jan 26, 2010
it's a search loop which runs the following when the file is opened. I would put it in the workbook_open sub but instead I want to have the sheet update before a main userform appears.
What I need it to do is:
Read each cell in column K from row 6 onwards to the last active row.
If a value is found then store the value (let's say as variable x) and from that cell, add up each value starting in the cell that is two columns to the left (column I) and one row down, onwards going down until a cell = "" is reached in that column (contains nothing). The total values added in column I could be stored as variable y.
Once cell = "" is reached, have x - y to make z and then the total (z)should display in the cell to the very left of the very original cell that contained the value x.
Finally, if x = the value in the cell to the immediate left from where x is (so same row but in column J), have that whole row from column A to L turn green, else have it turn orange:
View 12 Replies
View Related
Apr 28, 2014
I'm trying to return the selected items from a listbox to a range within a Worksheet when the user press the >> button as shown below. The point is i can't return ALL the selected items but only the first picked by the user.
Here is the code i'm using when button >> is pressed:
Code:
Private Sub Inserir_Atributos_na_Analise_Click()
Dim i As Long
Set ws1 = Worksheets("ListBox")
[Code].....
View 7 Replies
View Related
Dec 4, 2008
how to work with RefEdit tool within a userform!
eg: say I use RefEdit to select a range and I want that range to be in Bold.
Just give me a small code using RefEdit to perform the above action. I hope then I can use it in a larger way.
View 20 Replies
View Related
Mar 20, 2008
Problem: I have textbox entries that are part of a Userform that opens using a macro on a speadsheet button. Once this form is open, I can no longer actively work in the spreadsheets.
Need: I need a way to minimize or "put on hold" the Userform so that I can freely move around in the spreadsheet. This could be in the form of a button on the Userform. Then, I need a way to bring back this userform to the point I was at before being put on hold so that I can continue to input entries into the textboxes (again, a buttton that could bring it back). There should be a way to toggle between both worlds.
View 2 Replies
View Related
Aug 3, 2012
I have a requirement there is a excel sheet that has multiple sheet with application names , cntact names , phone numbers & email address and this gets updated by me often. I need a code that can put the application names and email address alone into an access database and that should automatically get updated whenever changes are made in the excel sheet.
View 1 Replies
View Related
Jun 20, 2007
Here's another question for you excel junkies to solve, while I try to understand what y'all are doing. I have two worksheets named "MASTER" and "BEDS". What I need to do, in sheet "MASTER" is go down column ("K:K"). "K:K" has unique data in it. then for each row...
"X" .value = offset minus one
"Y".value = no offset
now I need to go to sheet "BEDS" and find "Y" in column "A:A" then
from "Y" offset + 3.value = "TRUE"
"Y" offset +4.value = "X"
there should only be one instance of "Y" in column "A:A"..............
View 3 Replies
View Related
May 20, 2009
In Excel, I have created a userform where a user inputs parameters into various textboxes. A simulation runs based on these user entered values. All the VB code is in this form. There are some textboxes and charts that are supposed to get updated as the simulation runs so that the user can view the parameters change as the simulation happens (it is a "do loop").
Everything is fine except the charts and textboxes don't display the most current value. They display the starting value during the "do loop " execution. Once the do loop quits, they then display the final values and chart.
I have me.repaint and chart.refresh inside the do loop to display the most recent values. none work, as far displaying the most current values.
View 6 Replies
View Related
Jul 18, 2007
I'm writing a program on VBA for Excel and I've succeeded in just displaying the Userform when opening the file. I have set the ActiveWindow.Visible option to False and the Application.Visible one to false as well so that i only have the user form displayed.
However, if i try to open an excel file via "My Computer", the file doesn't open. I also noticed that when I was leaving the application.visible option to True, i couldn't access the application while the userform was running. I think i need to do something with an event, but i can't find the event corresponding to opening a file oustide Excel.
View 2 Replies
View Related
May 16, 2007
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name)
If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
'*****Part two of routine*****
View 10 Replies
View Related
May 10, 2009
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
View 8 Replies
View Related
Sep 11, 2013
I have a table recording details of attendees of courses. There are common and variable entries columns) for each attendee (row)
Common: Venue, Date, Teacher, Course.
Variable ( and specific to attendee): Role, Place of work,
So if there are 40 attendees then currently I have to enter the common fields for all attendees 40 times !!
Is there a way of having input boxes/ user form which asks for the common fields and then automatically updates the table?
View 3 Replies
View Related
Jul 19, 2006
I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
View 7 Replies
View Related
Mar 19, 2008
I have a form that allows users to enter details and retrieve details of data already entered. How can I make it so users can update the data in the subform?
View 3 Replies
View Related
Aug 18, 2014
I have been playing around with this and are totally baffled,userform service,enter pl094 in combobox1 ,first part looks up sheet1 and works well.
If I change overhauled date it changes on sheet1 ,but will not write to sheet repairs,has done in the past as you can tell from entries, have tried irow and c.row but for some reason will not write any more entries.
View 1 Replies
View Related
Nov 28, 2009
I have a userform that populates a list of names. As a name is added in column "D" column "C" updates a reference number using the formula =IF(D2="","",C1+1). I can get the formula to copy to the spread sheet but as a new name is added the formula stays the same. If I enter a name in cell D2 everything is fine but when I make the next entry in row 3 the same formula is entered as if it were text and not as a formula. so I wind up with a column of formulas that all say =IF(D2="","",C1+1) reguardless of what row the formula is in.
View 4 Replies
View Related