Add VBA To Userform To Search By Last Name And To Update Record
May 6, 2014
I have developed a functional User Form that works like a charm. The form will Add New Records to my database and Get Next and Get Previous records. This all works like a charm. I am stuck on how to search by Last Name or Employee Number and then to Update the Existing Record. If I change anything in an existing record as the VBA is written today, my only choice is to add a new record to the end of the database. I have added Command Buttons, but I'm lost as to how to write the code. Here's what I have so far:
VB:
Dim currentrow As Long
Private Sub cmdGetNext_Click()
Range("A2").Select
ActiveCell.End(xlDown).Select
lastrow = ActiveCell.Row
I have a userform for data entry. I am able to make codes for Add ( Add entry to database), clear ( Clear userform ) , Cancel (Exit userform). I have some more buttons and functions to be assigned to them but not able to write code .
Need codes for :
1) Have search box which searches Mat id in the complete database and returns value in the search result listbox. When we click on the result in listbox , the userform values are filled with the values that the mat id has . Then if user wishes he can update teh details for that mat id , and click on update button . the data is updated in the database. Or he can delete the entry from database by clicking on delete button.
2) Have arrows which will navigate through database ( need macros for that ) .
Not sure if I am linking this correctly but here it goes...http://www.excelforum.com/excel-prog...ification.html
This is a previous post link that is now solved but I have a new question based on the code in the post. I would like to know how to add a search and update ability to the user form I have created. I am newb with user forms so I apologize in advance for my lack of knowledge.
And yes I know the way it is set up now it is depositing data in two different locations; this is for a specific purpose.
I came across a userform which was perfect for my needs, as I only had to create additional fields, which I did and have attached. However, since I have more than 10 fields, I was getting an error with respect to the listbox function, where it stated that the list property could not be found. I gathered from the searches I did, that this is the max limit for this particular function. I have been unsuccessful in finding a solution, partly because I don't know very much and I'm not understanding how to incorporate some of these solutions into the vba code. I've created simple userforms before, but this one is a little more advanced than my current capabilities.
I need a code for vinculating a user form and perform some searchings on a excel database. For further details see attached file.
I created a user form in which some infromation is requested in order to search on excel database, I need a macro to search, display and update this data/information.
As an example, if i need to find the part number "C23138810-1" using the button search database and contains or match options, then displays all the information on the user form, this information is located in the same row where the part number is. Then, if some change is required, update is by clickig button "Update Data", and then if require "find next" item to review or update.
I am Working on a Query to Update Record in the Database if Exists Otherwise Insert. I have 2 tables in the database Receipt table and Inventory Account Table.
For Receipt Table there is Form which is used to Insert Data into the Receipt Table(SQL TABLE). Behind the Button Click Event with the Receipt Table Insertion Query I Write a Select Query to Get data from Inventory Account Table Group By Part Number and Location in a recordset.
Code: objmyrecordset.Open "select [Part Number],sum([Quantity Received]) as TotalQuantity,[Move From] from [5_PO_RECEIPT_TABLE_DATABASE] group by [Part Number],[Move From] ", objMyConn, adOpenStatic
objmyrecordset.MoveFirst Do strSQL = "select Count(*) from [Inventory_Account_Move_Table] where [Part Number] = '" & objmyrecordset![Part Number] & "' and [Location]= '" & objmyrecordset![Move From] & "';"
[Code] .......
I used the Above Code to Complete my task. The Problem is It is Adding the Correct Values into the Inventory Account Table But It is Not Updating the Previous Records. it sum all the Values in Receipt Table based on Part Number and Location but it insert this record in New Line. I want it to Update the Previous record for same part Number and Location.
I have a spreadsheet with a list of items for a company inventory. For each item there is a row that has all the details related to the item. There is also a "sub-row" for each item that only has the item number and current costs and pricing for the item.
I have a 2-part task that I am having trouble with:
First: I have to essentially update the "main row" with the updated cost and pricing info from the "sub-row" wherever one would exist and...
Second: Delete the duplicate row for the item (the one with less info).
My production file has thousands of rows, but I have created a sample file if anyone can help me with getting my task accomplished. I am new to these forums, so I'm not sure how I could attach the sample file to this post, but if someone could tell me how to do that I will provide it. In the mean time I will just insert a screenshot.
im trying to do is create a database of autocad drawings based on style of house number of bedrooms sq ft and if theres a garage. what i am wondering is how can i add a search function. for example i want to find a Cape with 2 bedrooms...i have all the information on the spreadsheet. what do i need to do to be able to search among the spread sheet without using the find function this is just the beginning of the data
I have created a Userform for entry data's in a Excel2003 file. I would like to retrieve a complete record (= a row) by searching on a string contained in a cell of this searched record-row. Here an example of a row and I'm searching upon "2041" via an inputbox.
I have a list of times in a column. I'm looking for a macro that will go down the column and record all the times that lay between 5 and 7am, 1 and 3pm (13:00-15:00) and 8 and 10pm (20:00-22:00)
I have created a complaint database with a spreadsheet and a userform in Excel. Only part of the information is known at the time the user enters the complaint. I have created a search feature so I can search for a record using a unique identifier called RecordNo. I can call up a record and change the information in the record or add additional information. When I hit the command button save it stores a duplicate record with the new information. I don't want duplicate records.
Also some of the data fields do not fill the original data. It seems to be inconsistent in the way it loads the original record data into the userform. This issue happens consistently with the weather items that are check boxes and also with the Complaint Taken By field. I am a beginner and have found most of the code to write this database online. So perhaps there are some conflicts between code from different sources. I've uploaded the spreadsheet and userform.
I am trying to populate a 3 column listbox in a userform from SQL Server via ADO. When the result set consists of more than one record, there is no problem and the data is displayed properly (ie each piece of data is in its appropriate column) eg...
however when the recordset returns only a single record, the data does not transpose and views as below (ie each piece of data in the record is on a different line in the first column
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
it's a search loop which runs the following when the file is opened. I would put it in the workbook_open sub but instead I want to have the sheet update before a main userform appears.
What I need it to do is:
Read each cell in column K from row 6 onwards to the last active row.
If a value is found then store the value (let's say as variable x) and from that cell, add up each value starting in the cell that is two columns to the left (column I) and one row down, onwards going down until a cell = "" is reached in that column (contains nothing). The total values added in column I could be stored as variable y.
Once cell = "" is reached, have x - y to make z and then the total (z)should display in the cell to the very left of the very original cell that contained the value x.
Finally, if x = the value in the cell to the immediate left from where x is (so same row but in column J), have that whole row from column A to L turn green, else have it turn orange:
I have a requirement there is a excel sheet that has multiple sheet with application names , cntact names , phone numbers & email address and this gets updated by me often. I need a code that can put the application names and email address alone into an access database and that should automatically get updated whenever changes are made in the excel sheet.
Here's another question for you excel junkies to solve, while I try to understand what y'all are doing. I have two worksheets named "MASTER" and "BEDS". What I need to do, in sheet "MASTER" is go down column ("K:K"). "K:K" has unique data in it. then for each row...
"X" .value = offset minus one "Y".value = no offset
now I need to go to sheet "BEDS" and find "Y" in column "A:A" then
from "Y" offset + 3.value = "TRUE" "Y" offset +4.value = "X"
there should only be one instance of "Y" in column "A:A"..............
In Excel, I have created a userform where a user inputs parameters into various textboxes. A simulation runs based on these user entered values. All the VB code is in this form. There are some textboxes and charts that are supposed to get updated as the simulation runs so that the user can view the parameters change as the simulation happens (it is a "do loop").
Everything is fine except the charts and textboxes don't display the most current value. They display the starting value during the "do loop " execution. Once the do loop quits, they then display the final values and chart.
I have me.repaint and chart.refresh inside the do loop to display the most recent values. none work, as far displaying the most current values.
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double n = Now() sn = Str(n) p = InStr(sn, ".") first = Left(sn, (p - 1)) l = Len(sn) d = l - p S = Mid(sn, (p + 1), d)....................
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name) If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with: 1. I'd like the UserForm to open when the workbook opens. 2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B 3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
I have a form that allows users to enter details and retrieve details of data already entered. How can I make it so users can update the data in the subform?
I have been playing around with this and are totally baffled,userform service,enter pl094 in combobox1 ,first part looks up sheet1 and works well.
If I change overhauled date it changes on sheet1 ,but will not write to sheet repairs,has done in the past as you can tell from entries, have tried irow and c.row but for some reason will not write any more entries.
I have a userform that populates a list of names. As a name is added in column "D" column "C" updates a reference number using the formula =IF(D2="","",C1+1). I can get the formula to copy to the spread sheet but as a new name is added the formula stays the same. If I enter a name in cell D2 everything is fine but when I make the next entry in row 3 the same formula is entered as if it were text and not as a formula. so I wind up with a column of formulas that all say =IF(D2="","",C1+1) reguardless of what row the formula is in.
I have a time sheet which is used by around 15 people. Part of the timesheet is a userform which adds a new sheet and names it with the seleted month and year. I have made a few changes to my timesheet which I wish to update on other peoples sheets. I am going to send out a speadsheet with a macro that people can run and it will automatically make the changes to their timesheet. I have done all the work for updating the various formats and formuals but I have hit a bit of a brick wall when trying to change the code on a user form via a macro. It would be great if I could either overwrite all of it or add a some lines of code from a specific line number.
The following code edits/adds the value of textbox2 to its corresponding cell. The problem with it is that after updating, the values are unrecognizable and can't be used for further calculations.
Code: With LB LI = .ListIndex Range(.ListFillRange).Cells(LI + 1, 2).Value = TextBox2.Value
[Code]...
Although it does not gives an error it makes even more values in the column unrecognizable.
What i want to be able to do is select an item from combobox (comboCPM) and then be able to check off some or all of the checkboxes then up date that line items record.
Check box value can be a "x" or "true" dont really care.
I have gone though the combox excercise at www.contextures.com, but when I try to use that logic in my spread sheet I get nothing in my drop down... just blank spaces
I am writing code that when you click "OK" on the userform the macro should copy the user entered values which are already in a worksheet into another worksheet. Once the values have been copied over I would like the form to clear the values. The code that I have so far is giving me a Method " Range" of object'_Global' failed error.
Sub UpdateVariables() Dim HomeAddress Dim CellAddress Sheets("UserInput").Select If Range("E1") = 0 Then Exit Sub For Each Cell In Range ("E4:E496") Cell.Activate If ActiveCell.Value = 1 Then HomeAddress = ActiveCell.Address CellAddress = Variables & "!" & ActiveCell.Offset(0,1).Value Range(CellAddress).Value = ActiveCell.Offset(0,-1).Value Range(HomeAddress).Select End If Next Cell End Sub
