I'd like to write a VBA script which writes all data of my mp3s in a spreadsheet. I can read all data like the artist, songname, album, year, this works fine. However I'm not able to get the duration of the mp3 files. Any sample script which reads the duration of the mp3 files?
View 2 Replies
I am trying trying to calculate the amount of time students view videos. I understand I should use [h]:mm:ss but excel continues to convert entries such as 0:14:59 (0 hours, 14 minutes, 59 seconds) to 12:14:49 PM both in the cell and the function bar.
The problem gets complicated because I have entered the data with two different formats; some in h:mm and some in h:mm:ss'
1) Is there an easy way to sum the duration time so it accurately reflects total hours:minutes:seconds?
2) Do I need to reformat or re-enter data to make it work?
3) If so, is there a macro to do it?
This has been a bear, (40 students by 30 videos) all hand coded.
Date problem.
I need to find the duration of time based on 4 columns:
column A : Start date DD/MM/YYYY
Column B : Start time HH:MM:SS [24 hour clock]
column C : End Date DD/MM/YYYY
Column D : End time HH:MM:SS [24 hour clock]
Column E: The duration result in : in Days and Hours
I have several thousand rows and need to complete before tomorrow
I have the below Date & time in cell a1 and another date and time in cell a3
8/2/2010 08:45:00
8/2/2010 10:15:00
I need to be able to show duration (in hours) between the 2 times, in this instance its the same date, but this wont always be the case. To add a level of complexity in addition to the gross duration in hours, I will also need to know how long (in hours or mins) of the duration fits into "in hours" ( 9 -5 mon- fri) then the duration thats fits "out of hours" (after 5pm weekdays or all day Sat & Sun)
I'm trying to create a work sheet with start and ending times with a 30 minute meal break, for the end of the week I would like to calculate those hours as a general number.
View 2 Replies View RelatedI have a worksheet where I calculate the duration it takes for an operation. the format of the worksheet is as folows:
The worksheet is composed of Start and Finish times in this format: 2009/06/02 5:32:19 , so for example,
- Row1 of the worksheet will have "Start" in column H1 and the start time in column B1
- Row 2 of the worksheet directly below has the "Finish" time, with the Finish time information in column B2
So with the help of excelforums I was able to implement a macro to extract the finish time cell found in row B2 and offset it to C1 and do a simple calculation to get the duration in minutes and display it in column D of the same row as "Start".
I have following data, data_in and date_out. I need to auto cal these 2 variable different and give the output as duration in month.
x_INV EF1date_lndate_out205/10/195005/10/1950325/10/195025/10/1950415/11/195015/11/1950508/01/195029/10/1950618/10/195018/10/1950717/10/195017/10/1950817/10/195017/10/1950915/10/195020/12/19501013/12/195013/12/1950 Excel tables to the web >> Excel Jeanie HTML 4
And give the result in colume X as following :-
x_INV X1stk_dur20304051060708092 Excel tables to the web >> Excel Jeanie HTML 4
I have 10 columns (1 through 10) called TASKS and 2 rows for each task
Row 1, has a 'start date' in the form of 1/1/2010
Row 2, is duration
the duration of each task may or may not overlap with other durations of other tasks.
how can i find out the total duration of ALL my tasks.....without any overlaping.
any formula that can calculate this? ( i need one number at the end!)
I've recently been experiencing some strange phenomena in relation to public variables. It seems that if I run separate routines in quick enough succession (e.g. press a button twice within a couple of seconds), the memory of the public variable "hangs over" into the second routine.
The routines, however, are completely separate events. And I'm not using userforms or anything like that in order to keep VBA running in the background. In which case it seems that Public variables don't always get set to nothing with the end of the final sub in a routine. Has anyone else experienced anything like this? I was under the impression only Static variables could do this.
Is there a format for duration of time. The attached spread sheet has column B "Duration". This is the actual time on which I need to do calculation. On "C2" I have the formula "=IF(B2>10,400,B2*40)". The formula is " if value in B2 is more than 10 hours then the value in C2 should be $400 , else C2= B2(duration time) multiplied by 40.
View 5 Replies View RelatedI have a spreadsheet with thousands of lines of code. Each row contains a complete code that needs to either be converted/pasted to a new .txt or .xml. Until now, just copying and pasting each line into a .txt file was necessary but there has to be a way to automate this. I would love to know if it's possible to extract each row(technically it is only a single cell per row, so its just a really large single cell) and add it to a .txt or .xml file?
View 12 Replies View RelatedI have the following spreadsheet:
A-------------B
File No.-----PRODUCT TYPE
123456-----NDT
123456-----NDT
123456-----NDT
123456---------
123456---------
789110---------
789110---------
789110---------
What I need is if there is an NDT in Column B and 123456 in Column A then I need to eliminate all rows which contain 123456.
End result
A
789110
789110
789110
Someone sent me a pdf file. It contains a list of items but the problem is I need to be able to copy and paste each item individually. I tried doing a google search to find a way to convert the PDF to a word doc but did not have any luck. So I think my only other alternative is to convert it to an excel (XLS) file.
Does anyone know of a way to do this so that I can successfully copy and paste words from the document individually and not just wind up with an excel file with a picture of the PDF file in it?
I have a Log In/Log Out report that I need pulling data from.
Ultimately what I want to do is get the amount of time my employees were logged out.
I am using Excel 2003. Attached is an example of the data I'm working with.
Sheet 1 contains the data, and Sheet 2 will be the summary.
So, looking at Bob's times: If column A contains Bob (A2 in this case), and the same row in column G (G2) contains 79, subtract the contents of the same row in column F (F2) from the next row down in column D (D3) (which would be D3 - F2). That result should populate on Sheet 2 next to Bob's name in h:mm:ss format.
If there is nothing in the next row down in column D, then do nothing.
I would like to leave the data as is, if possible. There are extension numbers next to the names in the data. If possible to ignore those when rolling up to the summary that would be useful. Also, on the summary sheet, if the employee is not on the data sheet (if they had the day off) they can have 0 or NA or something to indicate there is no data for them.
What is the formula for calculating duration in min/hrs between start time and end time without mentioning any date, and if the end time stretches to next day i.e beyond 12.00 midnight. And what is the logic used in the formula.
View 1 Replies View RelatedHow is MOD function used for calculating duration between two timings.
View 3 Replies View RelatedI have this set of time that is in eg. 0800 to 1630. how do i make it in to a 8.5hrs figure
View 3 Replies View RelatedI'm working on a project that will will have varying tasks & estimating the total duration to complete these tasks.
For example:
If estimating that the min-project will take 90 days & I have 17 tasks, how can I distribute the 90 days evenly amongst the 17 tasks?
is it possible to calculate the total duration of logged in from the data below?
TimeDateTimeExtCoDial Number08:02:00 AM11/10/200908:02AM203LOG IN08:03:00 AM11/10/200908:03AM2033448249908:05:00 AM11/10/200908:05AM207LOG IN08:05:00 AM11/10/200908:05AM132102445477708:08:00 AM11/10/200908:08AM207102445477708:11:00 AM11/10/200908:11AM1322908:11:00 AM11/10/200908:11AM1323008:12:00 AM11/10/200908:12AM2073008:12:00 AM11/10/200908:12AM2032908:13:00 AM11/10/200908:13AM132202631121108:14:00 AM11/10/200908:14AM203LOG OUT
Column 'A' has the time and extn# on column 'D' and indication of logged in or logged out on column 'F'
there can be several log in and log out by an extn.
Can it be done? Example posted. How was the SWF file inserted into Excel?
Link to the file is at: http://www.onlinebookforsale.com/swfinexcel.xls
I need to formula to covert duration between start date and end date to units below.
Start Date
End Date
Number of Month
Number of Years
Number of Days
6/1/13
8/31/13
[Code] .........
I encounter an problem when I migrate the excel application from excel 97 to excel 2000. The application basically composed of VB6 and VBA. When the program execute to line "ChangeHistoryDuration", i.e.
'Turn On the Audit
ExlApp. ActiveWorkbook.KeepChangeHistory = True
ExlApp.ActiveWorkbook.ChangeHistoryDuration = gi_duration
ExlApp.ActiveWorkbook. SaveAs w_filename, , gs_open_pwd, gs_write_pwd, , , xlShared
Run-time Error '1004', Method 'ChangeHistoryDuration' of object '_Workbook' faild was found. However, it runs successfully in excel 97. Does anyone know the possible problem that cause such error.
I have a spreadsheet with 4 columns - Start Date, Start Time, End Date and End Time. In the 5th column, I need to fill in the "Duration" which is calculated as follows :- Duration = (End Date,End Time) - (Start Date,Start Time)
View 2 Replies View RelatedI want to write code so that at the push of a button you can browse and find an ascii file. Select it. and then it will go into the sheet of a excel file that you chose in the code.
View 2 Replies View RelatedOur client uses an Excel spreadsheet that we provide to adjudicate/comment on our delivered products (primarily documents and reports). The spreadsheet has columns for:
DefectCode, SectionPage, Comment, FinalDisposition, FinalComment.
At the end of the process of client meetings and revisions, we must generate an MS Word-formatted report. I've written a macro to parse the comments and columns and generate a mostly-formatted Word document. What's missing are the corporate headers, footers, logos -- the standard template or basic document stuff that all of the details would fill in. For now, I auto-gen a Word document and merge it by hand into the corporate template.
So my question is: if I want to "include" a corporate Word template with the spreadsheet, can I bundle it with the workbook somehow or must it always remain a separate file?
My current thinking is that since a *.xlsm file is really a ZIP file underneath, could I store the Word template there where it would effectively be hidden from the user? Or what is the best way to bundle an extra file like this with my workbook app?
Is there a way to make the contents of a particular cell in a worksheet show where to pick up another file. Here is my code to pick up a file:
View 9 Replies View RelatedWhat I want to be able to do now though, is somehow, when someone sends the document back to me, create an FTP queue. I can do this with BulletProof FTP, because it allows really simple text queues. So, what I need excel to do is, when someone has finished selecting their files, is write the results to a text file like exactly like this (without the Line1:, etc.):
Line1: <text from D2>
Line2: 0
Line3: 0
Line4: 0
Line5: ?
Line6: <text from E2>
(then repeated for each row in the excel document until column A is returning blank)
I would like to use macros to insert the 'location' of my excel file into the spreadsheet footer. I have the following code already:
View 3 Replies View RelatedI'm creating an Excel template to reduce data entry errors on a file various departments submit with data, and have the VBA code associated with the spreadsheet close to done with one exception - restricting the active worksheet rows to just those with data to avoid having a number of rows with just comma separators. I can find the VALUE of the last active row (see code below,) but I'm trying to find the address of that last active cell, so I can plug that into my ActiveSheet.Range statement. Here's my code. As you'll see, I have the ActiveSheet.Range statement with hard-coded cell addresses. The A8 is the first row following spreadsheet headers, etc, but I'd like to be able to substitute a variable for the ending cell.
Private Sub CommandButton1_Click()
Dim Rowcount As Integer
Dim offset_num As Integer
FileName = ActiveSheet.Range("B4").Text
'Code to find value of last active cell
With Sheets(1)
MsgBox .Range("C" & .Cells(.Rows.Count, "C").End(xlUp).Row).Value
[code]...
I'm creating a master spreadsheet and I want it to pull live data from other spreadsheets depending on a variable.
I've a cell that has a variable date. I've files saved that have this variable attached to it in the name format: 'filename variable'.
I want to pull data, hopefully live, from workbooks based on this variable.
For example, I have files: generic 01212014, generic 01222014, generic 01232014.
The date is stored in the master workbook say in A1 that I can manipulate by entering a different date to pull data from a different workbook.
='[generic 01212014.xlsm]Database'!$L$3
='[generic 01222014.xlsm]Database'!$L$3
='[generic 01232014.xlsm]Database'!$L$3
There has to be away to make the bolded portions of the file name variable, right?
