I know this is wrong -
Code:
Function LoadStuff() As String
With Worksheets("Sheet1")
LoadStuff = .Range("A1:A132").text
End With
End Function
But can I make it work - or must you get each row one by one ?
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedI care about is the line starting wks4.Cells(Di, 2) = I am trying to sum data from a variable length column in worksheet 3 and place the result in column 4 However, when I hit enter after entering the formula into =SUM() I get
Compile Error:
Expected: list separator or )
[code]
Sub Macro1()
Dim wks3 As Worksheet Dim wks4 As Worksheet
Set wks3 = Worksheets("Sheet3")
[Code].....
I am trying to find specific text throughout an excel document (2007) and replace it with the same text but in italics. I tried using the options/format function and selecting italics for the "replace" text but it replaces the entire cell text in italics instead.
View 5 Replies View RelatedCurrently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
I am trying to search through an excel worksheet using the code below. I have a Form containg a text boxes and a command button (SearchTxt, FindCmd). The VBA program is able to search through XL but (1) It does not set the next value or text in a the worksheet active
(2) It only finds a value or text as an entire cell and not as a set of characters in a cell.
I tried to use Cells.Find method that solves the above problems, but i get an error message-Object variable not set (91) .
Private Sub FindCmd_Click()
Dim Rng1 As Variant
If SearchTxt.Text = "" Then
MsgBox "Please enter Vendor Number.", vbOKOnly, "Error"
End If
Set Rng1 = Range("A1:F10000").Find(what:=SearchTxt.Text, Lookat:=xlWhole, _
LookIn:=xlValues, SearchDirection:=xlNext)
If Rng1 Is Nothing Then
MsgBox "Cannot Find" & " " & SearchTxt.Text & ".", vbOKOnly, "Sorry"
Else
Rng1.Activate
Exit Sub
End If
End Sub
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
Check the attachment, i could not make out this using vlookup, how to overcome this problem.
test.xlsx‎
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
I am trying to Lookup a country to see if it is classified as a "Developed Country".
My formula would be in cell AA4. I want to see if the country in cell B4 is on a list of developed country's on another worksheet. IF the country is found on that list cell AA4 displays Developed. If the country is not on the list, cell AA4 displays Emerging.
I have tried an IF statement using the Match function and it does not work.
=IF(MATCH(B4,'Developed Country List'!$A$2:$A$37,0), "Developed", "Emerging")
I have been tasked with creating a scheduling system for my work. There are three groups of shifts that can be selected, Opens, Swings, and Closes. I have been asked to make the cells turn red if a user selects a sequence of shifts. We are trying to avoid having a person working three scenarios:
Close>Swing>Open
Close>Off>Open
Close>Open
If they select the shift that meet this scenario, then I need the cells to turn red. The complete list of shifts are on the "Data" tab and the the three scenarios have been inputted into the "Jan" tab in E13:G15.
I am using the code below to change the background of the cells in my worksheet based on what is in the cell. How can I modify it to accomplish the changes below and meet the criteria above?
I have a range that contains text. Let's say the range is colums $F:$M. There is x rows and in each cell there is either nothing or a word, let's call it "dummy". There is just a certain amount of "dummies", such as "dummy a", "dummy b" and so on, let's assume ten different dummies. It can also happen that "dummy c" or any other dummy appears more than once in those colums.
What I want Excel to do, is looking up columns $F:$M and make a list (possibly sorted) that includes all the entries from columns $F:$M, but each one only once and no blanks. Can I do this and if, how?
I'm trying to create an Excel function that allows me to choose a row from a table based on text found within entered data. For example, say I have a table called "categories" that looks like this:
Categories
cat
dog
mouse
Now in a different section of the workbook, I want to be able to enter an arbitrary number of sentences, one per row, that look something like:
"It's raining cats."
"The mouse is hiding."....................
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
I am trying to fill a textbox with a value from a different worksheet.
I can seem to get it to work whichever way i write it.
Also is there a way I could reference this from a different (closed) workbook
I have been having problems referencing text in a worksheet.
I tried cleaning it, didn'twork.
When I do T() some cells come back empty. I don't know why?
How do I get the text?
I’m building a data logger and all the info from data logger goes to sheet1 using serial port. I need to separate log1, log2, log3 to each individual sheet. Log1 must be copied to sheet2, Log2 must be copied to sheet3 and etc. The reason I need to separate Logs into different sheets so I can create charts for each Log automatically. Also I don’t know how big each log can be. Here is sample data what I’m getting to sheet1. I can change my datalogger to output text log1, log2, log3 to any numbers such as 9999 to make it easier. I need your help to be able sort out each data Log to each worksheet.
View 7 Replies View RelatedHi all, first up I'm a total novice but I'm trying to populate a worksheet from a text file, but here's the kicker, I'd need specific lines of the text file to populate specific columns.
None of the text files will contain the same data, but, they will all have the same related data on the same lines. So I'd like to see:
.txt file 1 line 1 > Worksheet A:1
.txt file 1 line 6 > Worksheet B:1
.txt file 1 line 12 > Worksheet C:1
.txt file 2 Line 1 > Worksheet A:2
.txt file 2 Line 6 > Worksheet B:2
etc.
Everything needs to go into the same worksheet. Some .txt files won't have any data in the specified lines so skipped if blank, or just blank data copied.
I need to run through about 1300 .txt files in a directory in this fashion, can it be done?
I have an Excel file that has several worksheets. One of the worksheets is a letter and one is an envelope. Instead of typing the name address twice I need to have th name and address info repeated onto the envelope each time I use enter info in the letter. I know how to do this with a formula but not with a text.
View 1 Replies View RelatedI want to find a text "Style#" in a worksheet and return the value next to "Style#". The value is supposed to be returned in, say, column H, for each row I found the text "Style#".
Below is the sample:....
How about if I have a long string of numbers that I want to display in another worksheet. For example, here is an item id off eBay, that I want displayed in another worksheet if it is present, otherwise, it should be blank. Here is the item id, they are all unique by the way.... 230092645222. I tried to use this formula below but it didn't work.
=IF(ISBLANK(inventory!S2),"",TEXT(inventory!S2))
I have to group some data from a pdf format.
I import them into a excel worksheet, but the problem is with selecting them, because the data are really messed up. I tried selecting them with sumproduct with criteria, but the problem is that the formula wants the criteria to be a text that is in only one cell, whereas in my case there I would like the formula to select for example the cell that has the text "Visa34" as well as the cell with "Visa12,FIB3" (i.e. all the cells with "Visa" even thought there might be other words or letters in the same cell...).
Trying to create a button that, once clicked performs the following task:
Checks whether the text in a cell in the column X2:X40 matches the text in a cell in the Range A2:U14.
If it does, the formatting of the cell in X2:X40 (eg background) must change to match that of the corresponding cell in A2:U14.
Only 1 cell in the range will match 1 cell in the column
For example:
Before click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a clear background
During click:
matches these cells
changes X4 so that it also has a yellow background
After click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a yellow background
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI have a spreadsheet which is an extract from another application's DB, and it's just ugly in Excel. No nice neat columns etc. Data from some tables of the other application were just dumped into cells. Some of the data I need is scattered about the worksheet in various cells. There are no seperators that are common, no common length of text strings I could use to pull every X word etc.
The one common thread I am working with here, is the the data I need to extract ALL begins with the first 4 letters, and containers a total of 8 characters. For example:
A3 - The dogs collar had the name ABCD1234 on it
J9 - Today I found a dog collar at the store, and it read ABCD2345
c5 - It says ABCD3456
I'm trying to basically see if there is a way/function within excel that can go through all of the cells and extract anything that says ABCD? (and the 4 wildcards after it)
The Find all function finds them all, but trying to just extract the data ABCD? info.
Any better way than to look up all 300 + rows and see if row already exist.
I need the macro to look if row A as matching text then see if texte matches in Column B, if yes then add new columns and copy entire row. If no match found add new row and copy content to sheet #2.
I don't want it to overwrite the existing information already in sheet 2
