Any better way than to look up all 300 + rows and see if row already exist.
I need the macro to look if row A as matching text then see if texte matches in Column B, if yes then add new columns and copy entire row. If no match found add new row and copy content to sheet #2.
I don't want it to overwrite the existing information already in sheet 2
I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.
This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.
I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.
I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.
I have some text in a cell, which is longer than the width that I am going to make that cell. When I don't wrap the text, it cuts it off at the end of the cell.
Since each column represents a day in a calendar, it would be incorrect to merge the two cells, but I don't want the text hidden, since I need to print the final product.
It is non-numeric text, and i've pasted --> values to remove formula issues.
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.
How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.
How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.
I am converting a xls workbook into a tab delimited text file, but instead of copying the entire workbook, I want to copy the first two columns of the workbook except for the header row.
This is my code which is copying the entire workbook -
Code:
Private Sub SaveAsTabDelimited(ByVal sFileName As String)
With ActiveWorkbook
.SaveAs FileName:=sFileName, FileFormat:=xlText, CreateBackup:=False
End With
End Sub
[Code]...
how can I achieve this in my macro. I tried using the range(A2:B100000).Select syntax, but it didn't work.
I am trying to put together some code to have Excel to copy all the text files from a folder with numerous text files, all of which have identical formatting, to one worksheet. Furthermore, I need the copying event to occur every time the workbook is opened so that it will "refresh/overwrite" the worksheet with all of the files in the folder.
I have lifted some code from several sites which would seem to an untrained eye to accomplish what I am trying to get done, however I run into a file path error.
I need to combine or merge text from cells in 20 rows of data into a format able to be printed. This is evaluation data for a class of 20 students, where each row is one students response to the evaluation, with the last cell in the row containing their comments (text data that may be blank, or up to several sentences in length). Here's what I'm trying to do:
Combine all 20 cells into one cell that can be printed (with word-wrap turned on).
Add a blank line between each comment.
Disregard any blank cells so extra blank lines are not added.
is there a formula or macro for merging identical text cells in a column?
I am looking at data relating to familes with a row for each family meber therefore the address cells for each family are identical. I would like to merge these cells for ease of reference when printing the data to be used as handouts for staff attending the households.
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
Code:
Sub sheets_merger()
location_path_file1 = Range("location_path_file1")
location_path_file2 = Range("location_path_file2")
file1 = Range("file1")
file2 = Range("file2")
[Code] .......
Below is the exact error message:
HTML Code:
Run-time error '1004':
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste.
* Select a rectangle that's the same size and shape, and then paste.
I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
I have Workbook with 85 Sheets. I want to copy Entire Sheets Whose Name Starts with CC to a Text File with Tab Seperated Columns . The Other Sheets should be ignore.
View 12 Replies View RelatedI want to copy a bunch of data from a text file and paste in into an excel worksheet I have open. I want to paste it at the end but I don't know how large the data range will be each time so I can't select that size range. I have this code so far:
FileToOpen = Application. GetOpenFilename("Text Files (*.txt), *.txt")
If FileToOpen <> False
Then
Workbooks.Open FileToOpen
Else
Exit Sub
End If
Cells.Select
Selection.Cut
Windows("myfile.xls").Activate
Range("A1").Select 'THIS IS THE OLD CODE FOR THE FIRST IMPORT
ActiveSheet.Paste 'I NEED TO REPLACE THIS WITH THE CODE FOR APPENDING
'OR PASTING AT THE END OF MY RANGE
From a supplier I will get a spreadsheet including the the following Information which I need to convert into an url including trailing slash (/) for an online store.
Column A = Value of Main Cartegory (e.g. Holidays)
Column B = Value of Subcategory_1 (e.g. Christmas Decor)
Column C = Value of Subcategory_2 (e.g. Candle Holders)
Those raw data are without any trailing slashes.
Now I want to create a column e.g. Column D (product_url) which should be a summary of column A thru C but if there is only a Value for Main Category
there should be no trailing slash,
if there is a Value for Main Category and a Value for Subcategory_1: no trailing slash after Subcategory_1 but trailing slash between Main Category and Subcategory_1.
The result should look like this:
Holidays (Main category)
Holidays/Christmas Decor (Main category & Subcategory_1)
Holidays/Christmas Decor/Candleholders (Main category & Subcategory_1 & Subcategory_2)
Is it possible to create something like that in Excel at all since all values will only be text and the trailing slash is actually functional for Excel calculations but in this case it would have to be treated as "text".
I have a folder containing text files. Any way by which I could merge all the text files into one file - one after another?
View 5 Replies View RelatedHow can I merge into a single cell from a range of selected cells that contain text. If the range of cells do have empty cells it should be smart enough to skip over or not to create an additional space. Any idea how can this be done? Macro or formula?
View 9 Replies View RelatedI merged about 15 adresslists from media contacts to one excel list. Each list had a name i.e. music, health, theater, etc. and the same logic in colums. I added a few columns and have 1 large list now.
As some journalists write about music & health & theater, architecture, etc. they are listed up to 10 times in the new list now. But the "genres" from the original list i.e. music, health, theater, etc. are in different columns. Some of the lines have empty fields (i.e. no address or mail)
All I want to do is have one line with all the information of all 10 lines in it, merged, dupes removed:
company - firstname - lastname - Adress - Mail, etc. : genre: music - health - theater:
example.xlsx
I atteched an example of the full list and the result i want
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies View RelatedIs it possible to copy text from a Excel worksheet and paste it into the custom header or can you just type in the three boxes?
View 1 Replies View RelatedI want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies View Relatedsample merging file.xlsx
I have a data array of 7 col and 256 rows. I want to focus only on the first 2 columns though. Here is what is going on. In the first column I have numbers from 1-256, these numbers are merged to the appropriate size to accommodate the data in column 2. However, the data in column 2 is not merged, it consists of 1,2, or 3 lines of text. Excel deletes the text in the rows below 1 if I try to merge, excel does not allow multiple row merge selections. What I am looking for is a formula that looks at column 1, finds how many rows are being merged in column 1, then looks at column 2 and identifies the number of rows needed for merging and displays that text in only one row. Basically, it's a formula that merges multiple rows of text in col 2 depending on the number of merged rows in col 1.
No.Customer/Operator
1Fairbanks Morse /
Beloit, WI
2H+H Umwelttechnik /
[Code]....
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View Related