Worksheet_change: Macro In One Worksheet To Run When Any Cell (in A Given Range)on A Different Worksheet (dataentry) Is Updated
Mar 27, 2007
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
View 7 Replies
ADVERTISEMENT
Jun 24, 2009
determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
View 4 Replies
View Related
Sep 26, 2013
I'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.
Is it possible do this with a Worksheet_Change routine? If so, how?
View 7 Replies
View Related
Jun 9, 2007
i have 1000 lines of criteria (being updated all the time)
i have say 10 or so different jobs
i need a summary of values that is automatically updated for each job on another worksheet for a report
View 9 Replies
View Related
Jun 12, 2007
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies
View Related
Sep 17, 2013
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
View 8 Replies
View Related
Apr 29, 2013
I care about is the line starting wks4.Cells(Di, 2) = I am trying to sum data from a variable length column in worksheet 3 and place the result in column 4 However, when I hit enter after entering the formula into =SUM() I get
Compile Error:
Expected: list separator or )
[code]
Sub Macro1()
Dim wks3 As Worksheet Dim wks4 As Worksheet
Set wks3 = Worksheets("Sheet3")
[Code].....
View 4 Replies
View Related
Nov 15, 2008
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies
View Related
Mar 17, 2013
Dropbox - Final.xlsm
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
View 9 Replies
View Related
May 12, 2008
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
View 9 Replies
View Related
Mar 20, 2012
I am trying to write a simple macro to create a chart over the used range in a worksheet. The first part of the macro correctly selects the used range which in this case is A1 to F19 when I single step through the macro. A listing of the macro is shown below:
Code:
Sub AddChartObject()
'
Sheets("Sheet1").Activate
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
[Code]...
When I place the formula given in MyArea as an argument for the source data, I receive a syntax error, so obviously it is the wrong argument. Numerous attempts to correct it also failed. As a sanity check, I placed the used range in an argument for the source data and was able to create the expected chart. fix the syntax error in the macro
View 4 Replies
View Related
Mar 20, 2013
I have code to save an excel sheet as a PDF and attach it to an email but when it try to modify it to save as an excel, it causes errors. Below is (1) the excel code I'm trying to fix; and (2) the working code for my PDF function. When I run the macro to save the excel worksheet in a new workbook, it creates the sheet in the a separate workbooks, but then gives as Run-time error '9': Subscript out of range." When I run debug, the line in red is what's highlighted. So it's not liking something with the filename/path??(1)
Code to save worksheet into new workbook (broken)Sub SaveAsExcel2()
Dim FileFormatstr As String
Dim Fname As Variant
[Code]....
View 3 Replies
View Related
Jul 26, 2009
I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies
View Related
Mar 8, 2007
Sub New_Book()
Sheets("2006-07").Activate
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
ActiveSheet.Paste
Application.CutCopyMode = False
Sheets("2006-07").Activate
Range("A1").Select
Sheets("2006-07").Select
Range("b3").Select
ActiveCell.FormulaR1C1 = "=R[-2]"
Dim ThisFile As String
Const MyDir As String = "C:"
With ThisWorkbook
ThisFile = .Worksheets("2006-07").Range("b3").Value
. SaveAs Filename:=MyDir & ThisFile
End With
ActiveWorkbook.Save
End Sub
The above VBA works by saving a copy of existing Workbook by refering to cell A1 and then Pasting Special worksheet 2006-07 which has external links. Is it possible to create a looping macro that refers worksheet("BUs") which list all business units I need to run and save? Range(A1) needs have a looping macro that refers worksheet BUs and then automatically saves files without manually changing cell references.
View 6 Replies
View Related
Feb 14, 2012
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies
View Related
May 3, 2013
coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True
If Target.Address="'Worksheet1'!A1" Then
If Target.Value = "Set 1" Then
Rows("40:50").EntireRow.Hidden = False
Else
Rows("20:30").EntireRow.Hidden = False
End If
End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.
View 5 Replies
View Related
Sep 14, 2008
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
View 9 Replies
View Related
Jan 27, 2012
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
View 8 Replies
View Related
Jan 28, 2010
I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.
This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.
I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.
I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.
View 12 Replies
View Related
Apr 21, 2012
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
View 1 Replies
View Related
Aug 29, 2009
I have the following line of VBA code that sums a range of cells on the active worksheet. I need to change that to sum on a specified worksheet. Is there a way to do that? I thought it would be simple, but have had no luck... Actually using variables for the cells, but simplified here for example's sake.
If Application.WorksheetFunction.Sum(Range(Cells(2, 2), Cells(123, 2))) = 0
View 9 Replies
View Related
Aug 13, 2014
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
View 1 Replies
View Related
Oct 2, 2011
How can i delete a range of cell in another worksheet 2? for example, i have a data in B1:F1 in sheet 2 and i want to put a button in sheet 1 which will delete the data in B1:F1 in sheet 2.
View 1 Replies
View Related
Jun 28, 2007
I am maintaining an issues list in excel. File contains two worksheets/tabs: 1) Open Issues & 2)Closed Issues
One of the columns is Status. When an issues is in 'Complete' status, it is removed from Open Issues and added onto the 'Closed Issues' worksheet.
There are many issues closed daily and its quite a manual task to individually delete rows in one sheet and paste them at the end of the last row in the other sheet. Want to have a button/macro that would find any rows that have the cell for the status column w/ value 'Complete', delete it from 'Open Issues' sheet, and append it to the 'Closed Issues' shseet.
ive done basic c++ programing years ago, but know nothing about vba or excel macros.
View 13 Replies
View Related
Mar 26, 2014
I have a macro assigned to a button that saves the worksheet as a PDF in a certain folder, but what I cant do is make the Macro look at a certain cell to save the file as a specific batch number.
This is the macro I have so far, I want the macro to do as below but to also look at cell L3 in the same worksheet and save it as the number what is in that cell.
[Code] ......
View 1 Replies
View Related
Sep 12, 2007
I am using the worksheet change routine for conditional formating of more than three items.
The problem is that it only changes if I manually type within the page and does not update if the cells are updated via formulas.
To explain a little more, I have three sheets that I combine into one to help find the best rate from three companies using the following formula:
=IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" All",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4),FIXED(PMI!C4,2)&" PMI/UG",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" PMI/GE",IF(AND(MIN(PMI!C4,UG!C4,UG!C4)=GE!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(UG!C4,2)&" GE/UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,FIXED(PMI!C4,2)&" PMI",IF(MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,FIXED(UG!C4,2)&" UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=GE!C4,FIXED(GE!C4,2)&" GE","ERROR")))))))
Please feel free to condense this if you like.
So when I update a reference on one of the first three sheets, the cells update on this sheet but the cell colors never change. This is the code for the worksheet change
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cel1 As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error GoTo 0
View 9 Replies
View Related
Jan 9, 2012
How do I set a worksheet to monitor H29 to run a macro whenever H29 changes?
I found [URL] but I'm having trouble getting it to work right
I cant figure out the errors im getting enough to correct them.
View 3 Replies
View Related
Jul 12, 2013
I need a macro that I will be using for a workbook that has many workseets. I need to save a worksheet "Test1" and save to a path found on worksheet "Test2" cell A1 and make the file name the value of "Test2" cell A2.
View 9 Replies
View Related
May 17, 2007
I have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
View 5 Replies
View Related
Oct 20, 2007
I'm having some problems with trying to reference cells on another sheet with VBA.
I've tried using both of the following but i am getting an error. I get object doesnt support this object or method when I do "'Master List'!" or type mismatch when I use Sheet1.Range($$:$$) I'm new to vba, sorry if this is a dumb question
With Target
Cells(Target.Row, 33).Formaula = "= SUMIF('Master List'!B3:B190" & ",A" & .Row & "," & Sheet1.Range("AR3:AR190") & ")"
End With
View 6 Replies
View Related
