Getting Time In Next Available Cell
Nov 4, 2008
I am trying to write a macro that, with the push of a button, causes the time H:MM:SS to be filled in the next available cell in a column. So in the enclosed sheet, if the yellow button is pressed, the next cell available in D:D (in this case, D9) would be selected, and the current time placed in it. This instead of having to type the current time manually.
Additionally, I would like to check cells B & C for content before I post a time. IOW, if B9 or C9 is blank, I would prompt the user to fill in that data before passing the time back to D9.
View 2 Replies
ADVERTISEMENT
Aug 21, 2013
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies
View Related
May 23, 2008
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View 4 Replies
View Related
Sep 6, 2006
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
View 6 Replies
View Related
Feb 24, 2012
I put the formula in cell which adds 2hrs in the current time. Now I want msgbox when the system time=time in cell. I want to do it from vba..
View 5 Replies
View Related
Nov 19, 2008
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
View 6 Replies
View Related
Dec 28, 2006
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies
View Related
Jul 24, 2007
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
View 4 Replies
View Related
Mar 9, 2008
I have a problem regarding sorting data having date and also time within a single cell.
Example data (I have written it as code to preserve formatting)
A B C D E F
12/5/2008 02:072/5/2008 06:0128804833363
22/5/2008 18:012/5/2008 18:0599271297
Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
View 9 Replies
View Related
Oct 20, 2009
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies
View Related
Mar 2, 2014
I need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
View 2 Replies
View Related
Apr 22, 2009
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
View 3 Replies
View Related
Aug 12, 2007
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies
View Related
Mar 3, 2007
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Jul 19, 2014
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
View 7 Replies
View Related
Jul 29, 2008
=TIME(LEFT(H59,FIND("h",H59)-1),RIGHT(H59,2),0)
in cell H61 on all of my worksheets except 3. this gives a time in the format of 2:30PM, 12:30AM etc shown in the cell.
Is it possible to use 'on time' or some other method to run a macro at the time specified in this cell? (or even better 15 minutes before the time specified in this cell) I was hoping i could get some help as i cannot write vba code and can only record macros
I would really like it so that this works on any open worksheet independantly. What i mean is that the time in H61 may vary from sheet to sheet and the number of open sheets may vary, so i may have for example 5 sheets that play my macro at different times.
View 9 Replies
View Related
Oct 19, 2007
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
View 2 Replies
View Related
Jun 18, 2009
When a cell changes i would like the cell in the next column to record the date of this change. After achieving this i want to set up conditional formatting to compare this date to the current date and if they are the same then change the original cell's colour to show it changed today!
I started using the code below (from ozgrid) which was working fine BUT my cell value in column A is actually taken from a different column. when the different column cell value changes my cell in A changes but the script below does not seem to see this as a change. it only records the date if i physcially change the cell in A rather than another cell prompting it to change.
based on my overall objective and my plans to date please can someone suggest a solution?
current code below....
View 9 Replies
View Related
Nov 4, 2005
I would like to have people enter text in the cells in column A and record the Date and Time they did it in the same cells in column J.
I have tried (in cell J1) If(A1<>"", NOW(),"") but of course the problem is that it keeps updating to the present time. I tried using INT(NOW()) but that doesn't work
I know I could simply Copy and Paste Special over each cell in the J column but that seems terribly inelegant.
View 3 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
Jun 21, 2009
In Cell C4 I have the time 8:00 AM. In Cell D4 I would like to show C4 plus 8 hours.
When I do the simple calculation of:
=C4+8
That doesn't work.
View 5 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Aug 23, 2009
I have a cell the has the date and time in this format
2/23/2009 8:11:00 AM; I need to get the time into another cell where I can then use another formula to see how often a persons name shows up within a particular time range, like
=COUNTIFS(DATA!$G:$G,Sheet3!$A2,DATA!$N:$N,">=18:00,
View 9 Replies
View Related
Apr 28, 2014
I am trying to merge the following together into a new cell:
A1 = 12:00
B1 = AM
I need a formula to place into C1, that will present the following "12:00 AM"
I have already tried = A1&" "&B1 (however this did not work)
View 5 Replies
View Related
Jul 3, 2009
im trying to take 2 separate cells and combine the contents into one cell and put a dash or hyphen in between. like so
A1 = 8:00 AM
A2 = 5:00 PM
then have a formula to grab those 2 cells data and put them into one cell to look like this : A3 = 8:00 AM - 5:00 PM
or
A3 = 8 - 5 <---this one would be best...if possible.
right now for the i have one cell getting the A1 data and another getting the A2 data.... with this formula : =IF('CREATE SCHEDULE'!A1="","OFF",'CREATE SCHEDULE'!A1). its set up to leave a blank if there is no timeslot.
View 3 Replies
View Related
Dec 5, 2013
I have cells with the format
01/10/2013 12:02:00 AM
I need to extract only time and delete the date
View 3 Replies
View Related
Apr 15, 2014
I have been trying for hours now to write a macro that would do the following:
I have a worksheet that looks like this:
15:10:06.3671B56221
15:10:07.1770B56221
15:10:09.3021B56221
15:10:10.1320B56221
15:10:11.3811B56221
15:10:12.1810B56221
15:10:14.6421B56221
15:10:14.6420B56221
15:10:16.2721B56221
15:10:17.5220B56221
with many more rows
I would like to subtract (for column A) line 1 from line 2, then line 2 from line 3....etc the data in column A represents time I would like to have the result in milliseconds and in a new column (D for example)
View 6 Replies
View Related
May 16, 2009
I have some code that display date and time in a cell when "done" is input into the adjaecent cell. (Any value would be the trigger, though)
View 2 Replies
View Related
Sep 7, 2008
If there is a time value founded in column G.
How can i add in value "1" into specified column H(1000hr-2200hr) or I(2200hr-1000hr) based on the 24hr-time format in column C ?
View 13 Replies
View Related
