Have Data In Row , Copy Formula In Column?
Jul 18, 2006
I am having a problem with copying a formula and I know that there is at least one way in which to solve this. I have all my data in one row. A1 -C1 (for example) ... I am looking to reference these values to a column in another part of my spreadsheet, K10-30 (for example) How do I go about getting excel to let me do this? I know that if you want to do it opposite, like data in columns and copying to rows you would use =Indirect(Address(Column()-X,X) with the X's being numbers ... but I am not sure how to manage this in my scenario.
View 5 Replies
ADVERTISEMENT
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
View 11 Replies
View Related
Dec 12, 2013
I need a formula to automatically transfer data in a column into another column, omitting cells in the 1st column that do not have data in them.
So, for example, transfer the data in column "A" below to column "C" below omitting any blanks when the formula automatically copies data over:
Example Spreadsheet.xlsx
View 3 Replies
View Related
Mar 13, 2009
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
View 2 Replies
View Related
Aug 20, 2014
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
View 5 Replies
View Related
Mar 7, 2007
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
View 2 Replies
View Related
Aug 21, 2012
I want to link the sums from one sheet to another.
In the first sheet the sums are in the rows. I want to link them so when i copy my formulas through columns in the first sheet it refers to the rows in second sheet.
I've been trying this on cell L6, ='sheet2'!T31
Now I want cell M6 to be ='sheet2'!T32. But when i copy, it becomes U31.
I see the logic in why my formula dosent work.
View 3 Replies
View Related
Sep 12, 2009
I have a formula in Row B,C,D,E,F......& etc.. in Sheet1.
Now, I want to copy the same formula in Sheet2 but in Column B,C,D,E,F....& etc..
View 9 Replies
View Related
May 11, 2009
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies
View Related
Mar 10, 2014
I have a spreadsheet where I need to insert a column then a formula that performs a calculation on the previous column, all the ranges change; so far I ahve managed to insert the column to the right of the one I want to perform the calculation on and insert the formula in the first line, but i'm having a problem copying this dowm to the end of the data range.
View 3 Replies
View Related
Apr 20, 2009
I need a macro that will copy each formula down each column from row 2 individually and then copy & paste values for each column (from row 3 to row x) until it reaches the first column with a blank in row 2 column y.
1. Copy A2 to A3:A65536
then Copy A3:A65536
then Paste Values A3:A65536
2. Copy B2 to B3:B65536
then Copy B3:B65536
then Paste Values B3:B65536
3. Do to each column until first blank row 2 ( no formula)
View 9 Replies
View Related
Mar 7, 2008
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
View 2 Replies
View Related
Jun 13, 2014
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies
View Related
Mar 20, 2014
In column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
View 3 Replies
View Related
Apr 14, 2014
I have this formula that I'm trying to insert into cell AE2, then copy down the entire column. When I execute it, none of the cells are populated.
Range("AE2").Select
ActiveCell.FormatConditions.Add Type:=xlExpression, Formula1:= _
"=+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$2/365)/P2)"
Range("AE2").Select
Selection.AutoFill Destination:=Range("AE2:AE3495")
Range("AE2:AE3495").Select
View 5 Replies
View Related
Aug 19, 2006
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies
View Related
Jan 17, 2008
i want to insert value from the name of file from this formula "=MID(CELL(""filename""), FIND(""["",CELL(""filename""))+1,10)" to range b2 until last empty range that i found form this formula =ROW(OFFSET(A1, COUNTA(A:A)-1,0))
Sub lumu()
Dim x As Variant
x = "=ROW(OFFSET(A1,COUNTA(A:A)-1,0))"
Columns("B:B").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B1").Select
ActiveCell.FormulaR1C1 = "kode_wilayah"
Range("B2").Select
ActiveCell.FormulaR1C1 = _
"=MID(CELL(""filename""),FIND(""["",CELL(""filename""))+1,10)"
Range("B2").Select
Selection.AutoFill Destination:=Range("B2", Range("B" & x)), Type:=xlFillDefault 'this an error
Range("B2:B123").Select
On Error Resume Next
ActiveSheet.Name = "t"
End Sub
View 2 Replies
View Related
Dec 9, 2008
I have a time card report which will record the time spent on work for each employee. Each month, i have to generate the time card report and copy the data to my master file. Is there any code that can auto copy the time card entry directly to the master file? I only need some of the entry on the time card report, some of the column can be ignored.
I was thinking of creating a macro that will prompt me to choose the file to import as there are different file for different individual. Attach here with the master list (Demo.xls) & the time card for one individual (Nov-KTTHAM.xls) for reference.
I want to copy the data on column B of the time card to the column A of the master list, column C to column B, column D to column C, column E to column D, column F to column E and column G to column G.
View 4 Replies
View Related
Sep 18, 2012
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
View 2 Replies
View Related
Mar 27, 2014
I have a column in two different worksheets that contain the same information that I want to match.
Raw Data - worksheet 1
Data - Worksheet 2
Column A - ShopperID
Same data is in both worksheets, column named the same in both worksheets
Raw Data worksheet contains email addresses in Column J that i want to extract and copy to column I in Data worksheet if there is a match on Column A.
View 3 Replies
View Related
Jul 19, 2013
I need to do something to my workbook, and I need to do this task:
When I insert/delete a column between E & F in sheet 1, the formula (not the value) in the column E was applied too to the new column I've inserted/deleted..
Then, when that happened to the sheet 1, It would happen too to the other sheet automatically..
So I don't need to insert/delete the row and copy the formula manually for each worksheet..
I know that I could simply solve it with grouping the sheet tab..
But I have plenty of data that needed to be inserted and applied with the formula..
I will attach the little example : insert.xlsx
And one more thing, I received this VB code from [URL] ..... for inserting the column:
VB:
Private Sub Workbook_SheetBeforeRightClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
And this code for deleting the column:
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
View 9 Replies
View Related
Nov 4, 2009
i have a dataset A1:E9, where A2:A9 is the object names and the remaining column (B2:E9) is the value of the object in the same row.
The object ID in A2:A9 has various names, and i want to copy certain data value from B2:E9, for only certain object name.
On the file attached i only want to copy data in Column C & D ( in the same row) of certain object name & then paste the data in to different working books.
View 4 Replies
View Related
Mar 27, 2014
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies
View Related
Nov 14, 2008
Id like to apply a formula, any formula to an entire column if it contains data, and incorporate the original data in the calculation and then replace the original data with the result. I don't want to have to create new columns.
I'm using this to fix up database results; a common problem is dates in dot format e.g. 14.11.2008
All I have so far is an autofill formula that overwrites everything. Can someone help me with the rest? I'm using the SUBSTITUTE function to replace the dots '.' with slashes '/'
Sub Create_formula_result()
Dim Limit As Long
Dim r As range
Set r = range("A1")
r.FormulaR1C1 = _
"=IF(RC[0]"""",(SUBSTITUTE(RC[0],""."",""/"")+0) ,"""")"
Limit = ActiveSheet.UsedRange.Rows.Count
r.AutoFill Destination:=range(r, Cells(Limit, r.Column))
End Sub
View 9 Replies
View Related
Jan 18, 2013
If I just one number in each each (row 1-100) for example, but in different columns, is there a way I can copy all of these numbers so that they are all in the same column--that is, they would stay in the same row but now they would also be in the same column.
View 2 Replies
View Related
Mar 25, 2014
I am trying to copy data from one workbook to another. I have an excel Database (Sheet1) with a macro that prompts the user to select an excel workbook which has the data I'm trying to copy.... I got this part down....From this opened workbook, I want to copy the Range("C2:C12") and paste into my database(Sheet1) workbook.
However, I need a dialog box to pop up for a user input to designate which row the data must be pasted into. The dialog box will search column H in the database (Sheet1) workbook to designate the appropriate Row # in which the data will be pasted.
Now the ranged that I copied earlier will need to be pasted selectively if possible. Range C2:C8 will be pasted from Column HG:HM and C9:C12 will be pasted from HO:HR. Is it possible to selectively paste a range in such a manner or should I just split it up? I'm not really sure the order in which I should do these commands or how to go back & forth from one workbook to another. I would like for the workbook filename to not be a factor.
View 9 Replies
View Related
Jun 20, 2014
I want to sum filtered data from one column V and paste value into TextBox1 Goal for this code is that sum will be displayed into textbox automatically. Also i select data as last row Column "I"
Private Sub TextBox1_Enter()
Dim LR As Long LR = Range("I" & Rows.Count).End(xlUp).RowTextBox1.Value = Sum(Range("V2:V" & LR).SpecialCells(xlCellTypeVisible)).ValueEnd Sub
View 1 Replies
View Related
Jun 26, 2014
In my assignment, I need to concatenate data from certain row and column ( The concatenate data will about 200 character). So once the concatenate cell change, it will copy the value to the next column.
View 9 Replies
View Related
Aug 25, 2008
I would like to copy all the text in the column to a cell below is what I'm trying to do
Sheet 1 (Original data)
Cell A
Apple
Orange
Apple
Grapes
Grapes
Lemon
Apple
Lemon
Sheet 2 (Desired Output)
Cell A, Row 1
Apple, Orange, Grapes, Lemon
The Original Data will not be a list a user can just type in the information. Basically I want to make sure I get all the list to the desired ouput sheet but do not want to list duplicates and want it in one cell
View 9 Replies
View Related
Dec 3, 2008
I want a macro that copies all columns data in coulmn a which starts from row 2 and delete rest of columns data.
see mentioned below example....
View 9 Replies
View Related
