I need a macro that will copy each formula down each column from row 2 individually and then copy & paste values for each column (from row 3 to row x) until it reaches the first column with a blank in row 2 column y.
1. Copy A2 to A3:A65536
then Copy A3:A65536
then Paste Values A3:A65536
2. Copy B2 to B3:B65536
then Copy B3:B65536
then Paste Values B3:B65536
3. Do to each column until first blank row 2 ( no formula)
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I have a macro that inserts a formula on the first row and then copies it down. The problem is the row count is variable but I know it won't exceed 5000 so I just copy it down 5000. For the blank rows I get the ugly #NAME, #VALUE, etc errors.
I know there are ways to supress those error messages, but how about a way so that the macro checks to see how many rows are populated so it doesn't copy down on the blank rows.
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies View RelatedI want to link the sums from one sheet to another.
In the first sheet the sums are in the rows. I want to link them so when i copy my formulas through columns in the first sheet it refers to the rows in second sheet.
I've been trying this on cell L6, ='sheet2'!T31
Now I want cell M6 to be ='sheet2'!T32. But when i copy, it becomes U31.
I see the logic in why my formula dosent work.
I have a formula in Row B,C,D,E,F......& etc.. in Sheet1.
Now, I want to copy the same formula in Sheet2 but in Column B,C,D,E,F....& etc..
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies View RelatedI have a spreadsheet where I need to insert a column then a formula that performs a calculation on the previous column, all the ranges change; so far I ahve managed to insert the column to the right of the one I want to perform the calculation on and insert the formula in the first line, but i'm having a problem copying this dowm to the end of the data range.
View 3 Replies View RelatedI am having a problem with copying a formula and I know that there is at least one way in which to solve this. I have all my data in one row. A1 -C1 (for example) ... I am looking to reference these values to a column in another part of my spreadsheet, K10-30 (for example) How do I go about getting excel to let me do this? I know that if you want to do it opposite, like data in columns and copying to rows you would use =Indirect(Address(Column()-X,X) with the X's being numbers ... but I am not sure how to manage this in my scenario.
View 5 Replies View RelatedI've columnA(code), columnB(desc) and columnC(value) in sheet1. How can i copy top 3 highest value for each desc into sheet2?..Below is the illustration of the scenario.
Sheet1
ColumnA ColumnB ColumnC
abc123 item1 5987
def312 item1 2324
ert343 item1 424
[Code]....
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies View RelatedIn column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
I have this formula that I'm trying to insert into cell AE2, then copy down the entire column. When I execute it, none of the cells are populated.
Range("AE2").Select
ActiveCell.FormatConditions.Add Type:=xlExpression, Formula1:= _
"=+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$2/365)/P2)"
Range("AE2").Select
Selection.AutoFill Destination:=Range("AE2:AE3495")
Range("AE2:AE3495").Select
code to copy a cell formula all the way down the same column to the cell where its next immediate row is completely empty.
View 6 Replies View Relatedi want to insert value from the name of file from this formula "=MID(CELL(""filename""), FIND(""["",CELL(""filename""))+1,10)" to range b2 until last empty range that i found form this formula =ROW(OFFSET(A1, COUNTA(A:A)-1,0))
Sub lumu()
Dim x As Variant
x = "=ROW(OFFSET(A1,COUNTA(A:A)-1,0))"
Columns("B:B").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B1").Select
ActiveCell.FormulaR1C1 = "kode_wilayah"
Range("B2").Select
ActiveCell.FormulaR1C1 = _
"=MID(CELL(""filename""),FIND(""["",CELL(""filename""))+1,10)"
Range("B2").Select
Selection.AutoFill Destination:=Range("B2", Range("B" & x)), Type:=xlFillDefault 'this an error
Range("B2:B123").Select
On Error Resume Next
ActiveSheet.Name = "t"
End Sub
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI need a macro that can copy a simple formula
I have 2 columns one for the number of items and a column next to it that cumulatively add the totals down the sheet e.g. =E12+G13 etc.
A B
2 2 (=A1)
4 6 (=A1+B2)
1 7
3 10
2 12
If I copy the formula all the way down the page my graph becomes distorted
Is there a macro that will only copy the formula when there is data in the first column and run in the background without needing to be activated
I want the column to be pasted on the first empty column in the other sheet. Additional information: I'm constructing an excel-file that has 4 worksheets. First sheet has all the workable data. Everything is ordened in columns. Column 1 has all the 'first information', column 2 all the 'second information'.
Second sheet has all the formulas. On this sheet I only have to select the data I want to use, for example the data of the 'first information'. On the third sheet will all the results be punt. All the results will be put in a single column again.
The fourth sheet needs to contain all the results, column by column.....
I've got workbooks containing various numbers of sheets that represent rooms with equipment in them.
The room number is always in cell B4. The data always starts in cell A8. I need to somehow copy the room number down column G starting at G8 and going down only as far as there is data in column A, which will vary for each sheet. I also need it do do this on all the sheets in the workbook.
I have NO marco skills, can anyone help start me off?
How to write a VB macro to copy an existing formula from cell A1 to cell A2 and back again.
I want to have a macro button which will act as a toggle each time the button is clicked.
For example the data will either be in cell A1 or A2.
When the button is clicked once, I would like the macro to execute and determine whether the formula is contained in A1 or A2.
If it finds data in cell A1, I want the Macro to cut and paste it to cell A2.
On the second click of the button I want it to do the opposite. Effectively it's a toggle switch.
I would like a formula or macro that would recognize an answer to a question and populate a group of headings in another sheet.My thought is it would be copy and paste related.
Specifically, =If(sheet1A1=2013, then show January 2013, February 2013, March 2013 etc in Sheet 2A1-A120.
I would have all these months written out somewhere else to be copy and pasted.
The following macro copies a range from "ThisWeek" worksheet to a selectable worksheet "Week1, Week2, Week3, etc. (determined by value in cell P13 (1,2,3,etc.)) The copy destination is currently cells F5:F36 but I want to make this range selectable also (ex. G5:G36, H5:H36, etc).
For example: If "ThisWeek" worksheet (fixed) cell $B$7 = "Adam", I want to match/lookup this name on row 4 (column F,G,H,etc) on the destination worksheet and copy the range of data to a column under the heading labeled "Adam". (No need to verify if heading exists)
Hope I have explained my problem clearly.
On the data sheet I attached you can see easily what I am trying to do:
The macro should do something like this basically:
Column A there is a entry like "L110E (CST_PRG-Wheel Loaders-E series models)"
Lets say we have 10.000 entries more or less like this.
Macro should do this:
* Take first word for example in this case "L110E" and copy into column D same row.
* Take second word's second part in this case only "PRG" and copy into column B same row.
* Take the 3rd word between - - in this case only "Wheel Loaders" and copy into column C.
I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
View 2 Replies View RelatedIm trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.
View 4 Replies View RelatedI have trying to develop the following macro (see below) which bases adds a column on another worksheet based on a cell value, this part works. I then want to copy the formulas from the column to the left of the inserted column, and this where I am struggling.
I found a question posed by 'TBW MK' and tried to adapt that. I can't work out how to express which needs to be copied - currently shown as Range(), given that it is a variable
Sub New_World5()
Sheets("Process").Activate
Dim ColNo As Integer
ColNo = Worksheets("Input").Range("H2").Value
With Sheets("Process")
[Code] .......
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
I have a dataset that is large. I want to write a macro program that checks the number in cell A1, copies the number and then the rows contents to another worksheet/spreadsheet. Then jumps to cell A2 and if the number is different to that of A1 copy the data of that entire row over from that row to the next worksheet/spreadsheet. If the number is the same as A1 then jump over to A3
Then continue this process but rather than comparing it to A1, compare it to the new number that has been found in coloumn A.
For example
7 A
7 A
6 AB
7 A
So starting at the first line then jumping the next one then to 6 and finally 7.
