Hide All Rows/Column All Worksheets On Open
Oct 17, 2006are there means to make visible the hidden rows and columns on all sheets
when the workbook is opened?
ADVERTISEMENT
Open Another Sheet And Hide Rows Based On Cell Value?
Oct 29, 2013I wish to have a button on one sheet wich opens another sheet and hides all rows without "NO" in F4:F300
Starting code for button below:
VB:
Private Sub Kilaneset_Click()
Sheets("MSDS").Visible = True
Sheets("MSDS").Select
Hide Rows On All Worksheets Meeting Criteria
Aug 7, 2007I have the following code that works well on a single worksheet
Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub
However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.
Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets
For Each rw In ActiveSheet.UsedRange.Rows
If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
'Next ws
End Sub
Automatically Hide/Show Rows Across Worksheets
Apr 17, 2008When I call a series of subroutines from different worksheets, ScreenUpdating = False is not working.Here is my
Private Sub Worksheet_Change(ByVal Target As Range)
With Application
.Calculation = xlManual
.EnableEvents = False
End With
If ActiveCell = "No" Then
Call Sheet3.DisableTBs
Call Sheet4.DisableTBs
Call Sheet5.DisableTBs
Call Sheet6.DisableTBs
Call Sheet8.DisableTBs
Call Sheet9.DisableTBs
Call Sheet10.DisableTBs......................
VBA To Hide Rows If Date In A Cell Less Than Today On Workbook Open
Apr 30, 2013I'm trying to create a workbook which has dates in column B, starting with row 10. I'd like to have a code which will hide the rows if the date is less than today upon workbook open. This would need to apply to worksheet1 only.
View 1 Replies View RelatedHide Worksheets And Rows Based On Empty Cells?
Jul 2, 2014My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
View 3 Replies View RelatedLoop Through Selected Worksheets And Hide Empty Rows On Each?
Jun 22, 2014I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
View 6 Replies View RelatedHide Rows With Zero In Column
Jul 3, 2007I'd like to create a command button Macro that will hide all the rows on a given worksheet where the values in a given column equal zero. I'd like to do this to make printing more manageable, so that only the relevant rows (with value>0) print.
View 9 Replies View RelatedHide Rows Where Column Has Zero
Jan 11, 2008I'm looking for a macro which hides a row when the value of the cell in the E column is 0, but makes sure it's NOT hidden when the value is 1.
(For example; the value of the cell E5 is 0, so row 5 is hidden. The valude of E8 is 1, so row 8 remains).
I've been trying the following code, but it doesn't seem to work for me:
Sub EmptyTest()
If E12 = "0" Then
Rows("12:12").Select
Selection.EntireRow.Hidden = True
End If
If E13 = "0" Then
Rows("13:13").Select
Selection.EntireRow.Hidden = True
End If
...
End Sub
( ... = and so on )
But that doesn't seem to work; it also hides the rows which have the value of 1 in the cell in the E column.
( The value of the cells under E is set by a formula to the value '1' or '0', not false or true or any of that sort. )
Hide Rows If Cell In Column K Is Less Than 50
May 15, 2014I would like the Spreadsheet to Hide rows with less then 50 Quantity on Column K.
I have attached the Inventory List.
If I can create a Button that will automatically Hide all rows with a Quantity less then 50 on Row K that would be great!
Use Checkbox To Hide Rows If Column Contains A Value
Sep 17, 2008I am trying to have a checkbox that will hide any row between 6 and 300 say IF column P of that row that is empty, or does not contain the letter "Y", whichever is easier. I have found a bunch of different code snippets, but most hide a predetermined row range, and I need this to be dynamic.
If it can also expand the range automatically as I add more rows to the spreadsheet, that would be even better, but not necessarily required.
Hide Rows Based On Value In 1 Column
Dec 30, 2009I wrote some simple code to work through a number of rows and hide the rows which contain a value of "XXX". For some reason, when the code hits the line denoted with? it hides the first row of "XXX"'s but then starts all over again at very first line of code outside the loop.
Sheet1. Range("start_1").Select 'cell c53
Do Until ActiveCell.Value = "EOF" 'cell c266
If ActiveCell.Value = "XXX" Then
Selection.EntireRow.Hidden = True '????
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
Hide Rows Where 1 Column Has Zero Value Cells
May 17, 2008I've got a macro that looks at the value of the cells in a range and if the cell value is zero, hides the correspoinding rows. It does take a bit of time to run with a 1000+ rows in the range, and I have more than one range.
Would someone mind having a look at the code and see if there is a more efficient way to run this?
Sub HideRows()
Application. ScreenUpdating = False
On Error Resume Next
With Range("EV_Amount_Range")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
Application.ScreenUpdating = True
End Sub
How To Automatically Hide Rows Based On Value In Column Q
Jul 11, 2007I am trying to implement the following:
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
[code].....
Automatically Hide Rows Based On A Value In Column Q
Jul 11, 2007After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
Set MyRange = Range("Q44:Q" & Range("Q425").End(xlUp).Row)
For Each ThisCell In MyRange
If ThisCell.Value = "hide" Then
ThisCell.EntireRow.Hidden = True
End If
Next ThisCell
End Sub
Macro To Hide Rows Based On Column Value
Aug 15, 2006I have read several related threads and tried to adapt their answers to my application with no success. I am trying to write a macro that will hide rows based on that row's value in a certain column. Specifically, column AB contains sums and if a sum equals 0 I want to hide that row. The sums start at AB5 and go to AB118 but there are 4 gaps in the column at rows 25, 47, 70, and 94.
View 9 Replies View RelatedConditionally Hide Rows Based On 1 Column
Nov 22, 2007I am trying to hide rows based on the contents of column BS. It the cell is empty (not just zero value, but completely empty of all formulae), then I want to leave it unhidden, then if the cell value is less than the value in cell E2 I want to hide the row. This code doesnt seem to like the first if...then next i
Sub hiderows()
Dim i As Long
Set v = cell.Value("$E$2")
' Turn off screen refresh for speed
Application. ScreenUpdating = False
' Get last row Col BS
For i = Range("BS2000").End(xlUp).Row To 15 Step -1
If IsEmpty(Cells(i)) Then Next i
ElseIf Cells.Value(i) < v Then Rows(i).Hidden = True
End If
Next i
' Turn on screen refresh
Application.ScreenUpdating = True
End Sub
Hide Blank Rows Based On Value In Column
Jan 13, 2008What I have is a sheet where the cells in range A9:A3508 have a formula that evaluates to blank if any of a variety of conditions are not met (date falls outside desired range, does not meet filter criteria, etc.) and a number if these conditions are met. What I am looking for is for all rows in that range where A is blank to be hidden (not deleted), and for this to automatically update every time A changes (meaning that if A goes from blank to a number, that I will need that row to become unhidden again). I have considered just recording the macro and calling the function with a button, but as this is for external users, some of whom may be unfamiliar with Excel, I would rather keep it as clean, simple, and automatic as possible.
View 5 Replies View RelatedHide Rows Based On Cell Value In Column
Jun 12, 2008I would like to hide rows (A17:A180) based on the value in the cell. If the value in a specific cell is "X", hide the row...if anything else is in the column's cell (A17, etc), show it.
View 6 Replies View RelatedHide Duplicates In A Column But Showing All Rows Data
Dec 17, 2012I have to show a report with 3 columns= Physician names, Section and number of procedures. The problem is that physician name repeat several time according the section they order and I need to show in the first column each Physician name just one, see attached picture.
I did try to use conditional formatting and advance data formatting but not working properly for me. I was able to use =A2=A1 conditional formatting and hide duplicates physician names but shows only the last row of the duplicate names no the first one.
Hide And Unhide Column And Rows Using Checkbox In Excel?
Jan 28, 2013How can i hide and unhide column and rows using checkbox in the excel.
detail price qty amount
chair 1000 1 1000
some time i just want to see only the amount or some time i want to see the qty, how can i hide and unhide row or Column
Hide/Unhide Rows Meeting Condition In Column
Aug 22, 2008In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
Sub NotCurrentHide() ...
Allow Hide & Unhide Column/Rows On Protected Sheet
Sep 25, 2007I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; http://www.ozgrid.com/Excel/outlining-protected.htm. How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.
View 2 Replies View RelatedCommand Button To Hide Rows Based On Date Range In Column A
Aug 22, 2014In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies View RelatedFormula To Link A Column Of Data Between 2 Worksheets And Duplicate Rows
Jan 27, 2010I'm in need of a formula, or another automated technique, to link a column of data from one worksheet to another. I have an input worksheet that I copy the raw data into that is formatted as follows:
COLUMN A
Row 1 12001
Row 2 12004
Row 3 12011
Row 4 12020
Row 5 13050
etc...
I need this import sheet to link to an output worksheet that would be updated automatically as new data is entered into the input sheet. However, I need the output sheet to copy the input values a specified # of the times and list them. For example, if the specified # was 3, it would be formatted as follows:
COLUMN A
Row 1 12001
Row 2 12001
Row 3 12001
Row 4 12004
Row 5 12004
Row 6 12004
Row 7 12011
etc...
I need the formula, or method, to be one that I don't have to continually re-enter as the data changes, as I have thousands of records to do this with. I've tried filling down, but autofill doesn't recognize an accurate trend. Is this something that I can accomplish by combining several fomulas, creating macros, or a combination of the both?
Hide Specific Rows In Sheet1 And Hide 5 More In Sheet2?
May 26, 2014I have a macro in which i can enter the rows i want to hide.
If i want to hide "position 32" i have to enter the number 8 of the row. This works fine. But now if i want to hide the "position 32" from Sheet1 it also should hide the rows 4-8 from Sheet2 [Data with 32].
Or if i hide "position 34" in Sheet1 [row 10] it also should hide the rows 14-18 in Sheet2.
VBA - Button Command To Auto-Hide Rows With Value HIDE
Jun 9, 2013Sub Button294_Click()
If Sheet1.Range("A34:A94") = "HIDE" Then
For Each cell In Range("A27:A94")
If UCase(cell.Value) = "HIDE" Then
cell.EntireRow.Hidden = True
End If
End Sub
Query Hide State Of Column Ranger And Hide If False
Jun 18, 2009I want to create a macro that checks whether a specified range of columns is hidden, and
a) hide them if they are not hidden, or
b) unhide them if they are hidden,
i.e. toggle the Hide state.
What method can I use to query the hidden state of a selected range of columns and return a boolean value?
Hide On Open
Jun 11, 2009Ok what i would like is when i open a certain excel file it hides the command bars the sheet prity much all of excel. though Must still be able to show the userform.
View 9 Replies View RelatedHide One Sheet And Open Another
May 8, 2014I have been reviewing various methods of doing this and I had one that worked and for some reason it has now stoped?
The Code is:
Sheets("BCDashbd").Select
Sheets("Main Dshbd").Visible = True
Sheets("BCDashbd").Select
ActiveWindow.SelectedSheets.Visible = False
This is activated by using a button on the BCDashbd Page. I want it to hide the BCDashboard sheet and Unhide the Main DshBd Sheet. Currently it opens the Main Dshbd sheet but does not hide the BCDshboard Sheet?
What have I missed?