My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
View 3 RepliesI have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
View 6 Replies View RelatedI have read other posts about this but I am still a little confused as most macros that have been made are tweaked to suite the users individual needs.
What I want is something like this to work in the active sheet:
If cells D2:D55 = ""
Then Hide.EntireRow
If cells D2:D55 = "has any value"
Then Show.EntireRow
The values in D2:D55 are populated by a VLOOKUP depending on what someone chooses in a drop down validation list, however not all the rows are always required so I would like to hide them to save some space on my form.
(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies View RelatedI am attempting to hide a series of rows based on if the cells in that row are blank. The catch is that the field of data in the column may vary as follows:
D E F G
x x X x
x X x
x
I would like to eliminate all the rows past the last X value in Column D for example
Below is the code I am attempting to use
Rows("41:60").Select
ActiveWindow.ScrollRow = 41
ActiveWindow.ScrollRow = 42
[Code].....
I want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Means, if the sum of all the cell (except first and second cells in that row) in a row is zero, then that row should be hidden.
View 9 Replies View Relatedway to automatically hide a row or column based on a specified cell.
Or even something general like: Hide all rows with cells evaluating to #n/a.
Im looking for a macro that hide empty rows. I found some simple macro but that are long to execute. While looking for a faster code, I found two codes that work pretty fast. But as I don't understand VBA I am not able to adjust them to my situation.
First macro: I am able to specify my range (B6:B77), but the macro applies to blank cells and I need to apply to "" cells.
[Code] .....
Second macro: very fast as well. Here, it applies to "" cells, but I am unable to specify a range. So the rows 1 to 4, which are empty, are hidden but should not.
[Code] .....
I am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
I need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am trying to write a code that would hide when certain cells in the worksheet are empty. Also the sheet name should start with a -.
This is the code i have so far. The thing is that the sheet will always hide. The criteria on the cells doesnt work.
Sub Hide_all_filled_Templates()
Dim ws As Worksheet
Application.DisplayAlerts = False
For Each ws In Worksheets
If Left(ws.Name, 1) = "-" Then
If Not Range("I9").Value = "" Or Range("K9").Value = "" Or Range("M9").Value = "" Or Range("O9").Value = "" Then ws.Visible = False
End If
Next
Application.DisplayAlerts = True
End Sub
The code now hides all shees starting with "-". It does not take the cell criteria into account. Why?
Other point is that these cell references are just a few of what it should really be. How do I make this easier for myself to write the code. Point is that these cells come in row 9 (like the example) then in row 11 then in row 15, 17, 21,23, etc. Also the columns jump with uneven steps.
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
View 3 Replies View RelatedI need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
are there means to make visible the hidden rows and columns on all sheets
when the workbook is opened?
I have the following code that works well on a single worksheet
Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub
However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.
Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets
For Each rw In ActiveSheet.UsedRange.Rows
If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
'Next ws
End Sub
When I call a series of subroutines from different worksheets, ScreenUpdating = False is not working.Here is my
Private Sub Worksheet_Change(ByVal Target As Range)
With Application
.Calculation = xlManual
.EnableEvents = False
End With
If ActiveCell = "No" Then
Call Sheet3.DisableTBs
Call Sheet4.DisableTBs
Call Sheet5.DisableTBs
Call Sheet6.DisableTBs
Call Sheet8.DisableTBs
Call Sheet9.DisableTBs
Call Sheet10.DisableTBs......................
I have tried to split using KuTool and ASAP Tool but they dont work. They can only split base on #of row. Between each of the group of my data, there is a empty row that split them. I want to split every single row from A:H to a new workbook. Why A:H becuz from A1:A8, the A5 is empty. It has to be in range, specify by me, so if the condition is met as empty from A:H, then split from there and keep going on the whole spreadsheet.
View 8 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
Found a closed post on a solution that is almost what I am looking for, described by the following tab layout...
All tabs in worksheet: Master1, Tab1, Tab2, Master2, Tab3, Tab4, Master3, Tab5, Tab6
Click Master1: Visible - Master1, Tab1, Tab2, Master2, Master3
Click Master2: Visible - Master1, Master2, Tab3, Tab4, Master3
Click Master3: Visible - Master1, Master2, Master3, Tab5, Tab6
When you click a master tab, all tabs that are NOT the same color as that Master are hidden (except other masters)
This bit of VBA does the trick however I would like it to be color based. In this model below, you have to manually add the worksheets that belong to a particular master.
The behavior I seek is to associate a worksheet with a master by changing its tab color, and not having to do it in the code. I think it could be accomplished by cycling through the workbook and creating an array of tabs based on tab color.
'=============>>
Private Sub Worksheet_Activate()
Dim sh As Worksheet 'Object
Dim arr As Variant
arr = Array("Sheet1", "Sheet2", "Sheet3") ' <<=== CHANGE
[Code] .....
I am in need of a macro to hide worksheets that do not match a certain cell value (which I have range named) in the "input data sheet". If this value matches cell value on the other worksheets, then hide all other worksheets and keep the "valid" worksheet visible
NVS_SCN is the range name that needs to be compared to the value in P4 of worksheets 2 thru 4
Example: NVS_SCN (located on the LANDFILL_DATA wksht) = RC_SOUTHLF
I want the Macro to hide all worksheets except for the South Region LF_VOL_Trend sheet,
if NVS_SCN = RC_MWESTLF then hide all but Midwest Region LF_Vol_Trend
I am attaching a file. I have seen macros to "unhide" or "Hide Rows or Columns" but I am not adept enough to figure out how to utilize range names and hide all but the one I want. As for "recording" the macro, I didn't know how to do the compare part.
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
Is there a VBA code that can achieve this?
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I'm trying to create a macro to delete all empty rows but only if they are a certain row height. I currently have a macro that looks to the first cell and if it's empty, then it deletes the entire row. The only problem is that I would like to keep the shorter, empty rows to maintain my desired formatting. I will post the code I have if I can figure out how to do it properly and not violate the forum rules.
[code]
Sub DeleteEmptyRows()
'Cell A above and below each header contains white and gray text to maintain formatting when deleting empty rows'
Dim i As Long, LastRow As Long
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row[code]......
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg