I am attempting to program a column of cells so that if say "B3" doesn't match the contents of "A3", then "B3" will be highlighted in some way, maybe with a color. I'm using Excel 2000 and I can't see a way in Conditional Formatting to accomplish this without having to program each cell in column "B". I was hoping to be able to click and drag down in column "B".
View 9 RepliesI would like to highlight the rows in my spreadsheet where columns G and H both contain the text "Yes". I've tried conditional formatting and VBA but can't seem to get either to work for what I need.
View 3 Replies View RelatedI am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedColumns E and F can have a 1 or a Zero
If e2, d3, e4 = all 0's or all 1's, count = 3 in col F
If either e2, d3 or e4 is not equal the count is 2 in F
Example
D E F
0
0
0 3
0 1 2
1 1 2
1 1 3
Also, why would this formula work with numbers but not letters?
=IF(B2="x",0,IF(C2="x",1,""))
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I'm trying to compare the 1st 7 days average this year vs the 1st 7 days average last year. How do I write the formula?
Last YearThis Year
536,212
852,865 417,290
345,981 702,816
850,560 189,808
335,285 691,152
572,165 283,036
842,145 404,916
735,364 528,332
121,475
348,793
697,944
876,360
671,170
928,103
Does anyone know a formula that calculates the future value of an unequal payment stream? I am attempting to calculate the value of an investment plan where the periodic payment increases by 1% each period. I can get the answer by using the FV formula for each payment and then adding them up, but would like to be able to do it without having to do so.
View 9 Replies View RelatedI have 2 columns D, E and I would like to find cases in column E that are not equal. based on the numbers in D.
For instance, in D I have the numbers
4901780959501
4901780959501
4901780959501
4901780959501
4901780959501
in E respectively I have
MSX-M2GSX
MSX-M2GSX
#N/A
0
MSXL2GFSHX
Well how would I be able to spot these variations and insert all of them in columns G,H ?
I am using this formula
=OFFSET(Inputs!$E$124,0,0,COUNTA(E124:E168),1)
to get an array with the names of some inputs excluding the blanks ... hit F9 to see that it works fine...
Now i want to combine the arrays produced by this formula for two different lists.
how to achieve that? please let me know if this is too vague..
how to plot dates which are unequal in interval
the dates that I want to plot are the following:
1/2/13
1/7/13
1/14/13
1/21/13
1/28/13
2/4/13
2/11/13
2/19/13
2/25/13
3/4/13
3/11/13
3/18/13
3/25/13
I want to appear them exactly on my X axis no different dates in between them.
using the ttest formula function
View 2 Replies View RelatedI have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.
For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).
The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).
For example: .....
I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
How would I select a dynamic range in VBA without using name a range in Excel. I have searched for possible answers, however they use xldown, or xlup which works great for non-empty cells. My problem need to select the area where there are empty cells. Here is a snap shot of the data looks like:
Trade Date A B C D E
2008-Feb-11 450,432
2008-Feb-13
2008-Feb-15
The cell with number is where I got the formulas. Now i wish to fill that formula with the rest of the area. However, the problem is the number of rows and number of columns may change in the future. So I need to select those empty areas in a dynamic way.
Code:.....
I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.
I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
Here is an example spreadsheet to help explain
I have attempted this by writing this formula ...
As per the attached file – I am trying to mark (with an X) the first 5 Adjacent cells which SUM up (and above) 480. As you will see, in some instants, one of the 3 formulas is correct. I am looking for a formula to work correct IN ALL situations.
In Col. A I marked (light Blue Background) the FIRST 5 cells which meet the Condition. In Col. F are the sum results and those which meet the Condition
are in Bold RED.
1. I want to highlight cells on a form so that a user knows which cells to fill out.
2. When they print the form I do not want the cell shading to print.
I am trying to write a macro which highlights all the cells with any reference to other cell. The macro should highlight a cell with formula like = 3 * A25 but not highlight a cell with following formula. = 3 * 0.4535566. 'Hasformula' property is not useful here as it can't distinguish between above examples.
View 3 Replies View RelatedI need to have three rows link to each other. The first column cell A is a paste link and is always changing. The second B is a vlookup referenceing A and finding it in a changing table...the source for the paste link. C needs to follow the other two cells and remain "attached" to it. However, C has to be a cell that is hardcoded somewhere, meaning that C is not found in the source data and must be determined by a person. I have tried to link the sheets through vlookups and other formulas, however, this only works when the data is sorted and nothing new is added. I need a static sheet that can take in new values. I need to create some sort of relationship between the cells
View 14 Replies View RelatedSee the attatched spreadsheet. I can not seem to figure out a formula that will calculate the totals for each type of data.
My goal is to have a sum for each location for # of audits, Critical Counts, and Major Counts.
I have list of names of people in a billboards league. Directly to the right of everyone's name in the adjacent cell is their "win percentage". These percentages are sorted in descending order and I need the names to move along with the adjacent cell as the percentages change. When i merge the cells things get really messy.
View 1 Replies View RelatedI need the syntax that allows me to reference the cell directly beside my target cell for each row in a column
Like:
Col A Col B
S D
T F
S F
If i was targeting Col B
In the following spreadsheet, I'm trying to automatically count the amount of times an A code (A1 or A2) or B code (B1 or B2) appear under each person's name in the K1:M5 table.
View 3 Replies View RelatedI am trying to sum 3 non-adjacent cells. Some cells are blank, not always in the same row / column, and all are the result of vlookups. I tried: E = I+M+Q, but the result is #value!
-In column E (respectively F, G, H) that's where I want the result of the sum
-In column I (respectively, J, K, L), depending on the row, some cells are blank and some cells contain a number. That's the first term of my sum.
-In column M (respectively N, O, P), I have also blank and non-blank cells, depending on the row. This is the second term of my sum.
-In column Q (respectively R, S, T), also blank or non-blank cells. This is the third term of my sum.
I will need to extend this formula to F=J+N+R, G=K+O+S, H=L+P+T, and probably also a sum with 4 terms where E=I+M+Q+U etc.
I am trying to work out a formula for calculating average of non adjacent cells but it should ignore any cells with 0:00:00 value or are empty.
At the moment I am using the simple formula =average(A1,A2,A5,A9). But if any of these cells is empty or 0:00:00, it then gives me a wrong average. I could have used a array formula with if function but it then calculates all other cells in between as well that I don't want to e.g. I may not want to include include A3 in my calculation but as it has some value in it, it gets in the calculation and gives the wrong answer again.