Highlight Only First Duplicate Number That Found In Column?
Aug 24, 2013
I have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
how to even start this macro but i will like the macro to find duplicate with thin the same row and highlight it i have done with conditional formatting but the spreadsheet is about 3000 rows excel performance is super slow if anybody has a macro out there.
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
find the attached Sheet, where some values are entered in column A with repeated action. What I need that through an excel function the repeated values should get red colour like in the Column C.
I am unsure if I would even need VBA to do this. I am trying to find a way to highlight all cells in column AO that have duplicate phrases and transfer just the phrase over to column CF. Ex: A cell containing "She didn't listen" and a cell containing "They didn't listen" would highlight and "didn't listen" would move over to Column CF. Would it be possible to do this without specifying the exact phrase?
I created a spreadsheet for use by the shipping department where I work. We are trying to prevent pulling and shipping the incorrect item to the customer. This is how it works. The employee downloads a CSV file containing items that have been purchased from our website and imports the file into the excel. Then the item is pulled and the employee scans the item's barcode into the spreadsheet named "SCAN." Formulas and code on the "reference" sheet look for the SKU number in the list from the CSV file while others create a consolidated list of SKUs that have been scanned, SKUs that have a problem and need to go to customer service, and SKUs from the CSV file that have yet to be scanned. Some of the formulas in this workbook have been borrowed from forums like this and altered to fit my needs - I'll admit I'm not even entirely sure how they work.
Occasionally a SKU is scanned in twice and not always sequentially which will effect the total item count. It can be very difficult to find the duplicates in the list.
I would like for any value that appears more than once in column B of the 'SCAN' sheet to be highlighted. I have tried to do this, but to no avail.
Scan Below FWD: CS? If FWD: CS, state reason below: Status NOT SCANNED FWD to CS SHIPPED
I managed to find this great bit of code some time ago and would now like to add to it. The code basically identifies any duplicates in column A and then lists the results in a message box,e.g.:
Duplicate Name: REF12345 Rows: 2,3
Works great for 1 or 2 duplicates but if there are many it becomes quite difficult to keep track. I'd like keep the code as is but add highlighting to the identified cells.
I need VBA help. I know how to highlight every other row but what I can't do is highlight a row if column values are the same. For example I have 5 columns but only the first one has the data I'm interested in. If the data in the first column looks something like this:
1 2 3 4 4 5 5 5 6 6 6 7 . .
I want to highlight every other row that has similar values therefore I want to highlight row 2, both row 4s, and three 6s...etc.
I also want it to start on the 2nd row of every page until the last row of every page which is row 37 in my case.
I've been looking for a solution to highlight all duplicates within a certain column across all worksheets in the workbook as the entry is made, no button to search for them. I have found bits and pieces, but can't seem to stitch them together to create what I am looking for, still very green with vba.
My workbook is a loading schedule at a warehouse, so there is a tab for each day (the date being the tab name, ex. '12.04.13'.) Tabs are continually added and removed to progress the calendar, and minimize file size. The column I am searching for duplicates in, is column L (or 12, however you wish to identify it.) If a duplicate value is entered, I want at the very least to highlight the value just entered, and the value elsewhere on the workbook, and if possible, have a msg box pop up stating the location of the other duplicate (or at least the tab (date) the duplicate is on.) The message box is more so for an in your face error check, with a built in GPS. Would it also be possible to only search from row 2 to 100, and ignore any further rows on each sheet?
The point of this, is to locate duplicates to make sure an appt has not been double booked, and both entries can be located to verify which entry has the correct information (carrier, delivery appt, etc.)
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code: Private Sub TextBox1_Change() Dim test1 As String Dim FoundRom As Range Dim i as String Dim abc1 As Range Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
I need formatting to highlight the dates in Column H if they are a greater than a week or more from Column G. Tried some different ways of doing this with the conditional formatting but cannot get it to work yet
on one sheet we have a summary of the main list, which includes totals of money recieved, totals of all the different sources (ie, where they heard about us from), the totals of the frequencies they pay (ie, how many donate monthly, quarterly...) ... etc. on the next sheet we have the "main" list of donors, their IDs, amounts, frequency, source ...
the totals on the first sheet are updated manually, but i want to change that as there are a great number of errors.
I have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
I understand filtering will accomplish this but a macro would save time.
My data is in Column "B" that contains ID#. If there is a duplicate ID# in column B, delete the row, but keep one. In addition, I do not want to delete blank cells in Column "B" and non number data.
I would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.
I am working for a non profit humanitarian org and I am trying to modify an excel 2003 spreadsheet to change the formatting (color) in one cell based on the value of another cell. Obviously this is easy with conditional formatting, except that I have a list of around 25 unique values and formats.
Could anyone point me in the direction of some code that can do this? I am a relative novice to Excel when it comes to VBA and scripting things.
Using a Dynamic Named Range "Data", I would like a Formula to return the Row Number of the "LAST" instance of a duplicate numeric value - repeating twice consecutively in the same column.
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
I have a userform that allows a user to enter data from columns A to P. I successfully installed a macro (which I got from this site:[url]
that deny a duplicate entry in Column A. The macro then "clears" the duplicate value in column A, which is okey. However, I need help for a code so that the rest of the entries from Column B to P (within the same row) will also be cleared automatically. I tweaked the "target.value" quite unsuccessfully.
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
I need a code please that will look in Column C in every workbook (excluding the sheets “Blank”, “Orders”, “Summary” and “Archive”) and then it will highlight duplicates in Red and Bold.
I found the following code but I need it so it looks on every page excluding the ones mentioned above.
How can i highlight cell "TE001 in 6/19/14" to red color if it duplicate value within the same day, but will not highlight cell "TE001 in 6/20/14" if not in the same day...
