Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub But I receive this error: Run-time error '91': Object variable or With block variable not set
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Insert Row At Active Cell With Formula From Fixed Row
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell. Eg: Active cell is something random like E16 I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
View Replies!
View Related
Highlighting The Row With The Selected Cell
I work with many sheets that have many data columns and have used a "greenbar" formula in conditional formating but would like to have a similar formula that highlights the current row. If possible, it would be nice if this new formula would not wipe out all other formatting as it moves. I have seen Ivan's work at www.mrexcel.com/hof001.php but it says that it wipes out other formatting. The formula that I am currently using is =MOD(ROW(),3)=2 Is there a way of getting the current row number so that it could be =ROW()=(current row number) ?
View Replies!
View Related
How To Lookup Row # Based On Content Of Another Column's Cell
I have a 3 column table with 20 rows. The first two columns contain travel expense data. The cells in the third column are blank exept for whichever cell I enter an "x" in. Please let me what formula or worksheet function do I use to calculate the travel expenses based on the data in the first two columns that correspond to the row of the cell with an "x" in the third column?
View Replies!
View Related
Select An Item Of Data ( Or Update A Particular Cell ) Then I Loose The Highlighting For That Row
I have a big spreadsheet that has 30 columns. The data is downloaded from an SQL database from time to time. The row identifying data ( the record number/key ) is in the left most cell. I often have to move over 10 to 20 columns to view some other data in the same row. I can do this by selecting the preset Excel row number which higlights the whole row and then use the lower slider bar to go to the correct column to view the data. However if I wish to select an item of data ( or update a particular cell ) then I loose the highlighting for that row and I can "loose" which row I am on. ( maybe I'm stupid but it does happen ) Can I use Conditional formatting to highlight a row whenever I alight on any data in that row and it sttays highlighted until I select another value on another row?
View Replies!
View Related
To Highlight Active Row And Column
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10. Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range) Dim i As Long Cells.Interior.ColorIndex = xlColorIndexNone If Application. CountA(Target.EntireRow) 0 Then i = Target.Row Else For i = Me.UsedRange.Rows.Count To 1 Step -1 If Application.CountA(Me.Rows(i)) 0 Then i = i + 1 Exit For End If Next i End If Rows(i).Interior.ColorIndex = 6 End Sub Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
View Replies!
View Related
Paste Formula To Specific Row In Active Column
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View Replies!
View Related
Highlighting The Active Cell After A Highlight
I have a cover sheet to a workbook that holds hyperlinks to its relevent page. Several of the hyperlinks link to the same page but different relevant cells. However it is not overly clear which cell is active when you click the hyperlink. What I would like is for the active cell to be highlighted on the page. EG hyperlink 1 links to page 1 cell A2 & hyperlink 2 links to page 1 cell B6 - I would like A2 to be highlighted when accessed by hyperlink 1 & B6 highlighted when accessed by hyperlink 2.
View Replies!
View Related
Use Value Of Active Cell To Name Row
I'm trying to take the value of a cell and use the value as a name for the row. If cell a1 has value = June. I want to change the name of row 1 to June. I'm not sure what I'm doing wrong with the following code. Sub Name_a_row() ' ' Dim TheName As String Dim RowNum As Integer TheName = ActiveCell.Value RowNum = ActiveCell.Row ActiveWorkbook.Names.Add Name:="TheName", RefersToR1C1:="=Data!R&RowNum"
View Replies!
View Related
ACtiveCell.row: Active Row Is Empty
I am trying to write a statement that sees if the the row below the active row is empty. I have written the following but it is wrong. Please can someone correct it for me? Thanks! If IsEmpty(ActiveCell.Row.Offset(1, 0)) = False Then MsgBox "Not Empty" End If
View Replies!
View Related
Use Active Cell For Row Number
There is a chart encompasing column A, B and C. The column D has certain numbers stored in its cells. All I wont is to build a code which would check the value of the cell in column D which is in the same row as the active cell, and then paste certain date into the active cell - basing on the value of the cell in column D. Here an example: Sub pasteif() first one) column D has 'if the value is i.e 2 then it should paste into the active cell whatever there is in Range F1:G1 'if other value is present in this case in cell D1 (it is always the D column) then other range would copied into the active cell Range("F1:G1").Copy ActiveCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
View Replies!
View Related
Highlight Row Of Active Cell
Is it possible to have a specified shading (say 50%) applied to all rows except the currently picked row and the header rows to allow a user to focus on inputting across the row? I'd use this in conjunction with " Move Selection After Enter" to "Right" so the user would stay on the same row. I've tried the Help function, but can't find anything.
View Replies!
View Related
Delete Row Of Active Cell
I have a macro for deleting a row. I want iit to delete the row that I have selected, that is i if I mark cell B22 I want it to delete row 22. But it deletes the row under it, that is 23. Sub Tabortrad() Dim intRadnr As Integer Dim intStartrad As Integer Dim intSlutrad As Integer intRadnr = ActiveCell.Row intStartrad = ActiveSheet.Range("Första").Row + 1 intSlutrad = ActiveSheet.Range("Sista").Row - 2 If intRadnr < intStartrad Or intRadnr >= intSlutrad Then MsgBox "Kan inte radera denna rad. Placera markören på en av bokföringsraderna mellan rad " & intStartrad & " och rad " & intSlutrad - 1 & "." & Chr(13) & "En ny rad kommer att infogas under den rad där markören står.", vbOKOnly, "Felaktig rad markerad".......................
View Replies!
View Related
Range In Same Row As Active Cell
I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View Replies!
View Related
Merge Range Based On Active Cell Row
I am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this? If Sigma = 0 Then Selection.EntireRow.Insert ' New row for new entries ActiveCell.Value = "NONE" ActiveCell.Offset(1, 0).Select End If
View Replies!
View Related
Highlighting Entire Row
This problem has been driving me insane, as I thought it wasn't possible to do in excel however this morning I accidentally pressed a shortcut key on my keyboard and what I wanted, happened.. pity I can't remember how I did it. How do I highlight an entire row, but remains highlighted when i enter info in the cells until i move down to the next cell? Eg. I click on row"1" so that all cells are highlighted, then while entering info in B:1 - the entire row is still highlighted? This will be very useful in my line of work. I know there was some information on conditioning formatting, but surely there is a way to do it via keyboard shortcut since i accidentally did it just before.
View Replies!
View Related
Copy 'x' Cell Value Evey Nth Cell Along On Same Row
Have often used this site, but now need an answer to something a little more specific. I would like to create a forumlae/function that would allow me to copy a cell value 'x' into every 'y' cell along. e.g copy cell x every 3rd cell along (in same row). The formulae must allow for 'y' to be of any value between 1-5 as this can change. I have attached a screenshot, as pictures are probably much better than my text above.
View Replies!
View Related
Highlighting A Row And Having That Data Tranfered To Another Worksheet
I have 1 Excel Doc that has 3 worksheets (DATA, COVER, TPA). DATA is where i input the data and COVER and TPA are where the data needs to end up. both COVER and TPA are standardized sheets that i do not change...only the data coming in will change. How can i make it so that whatever row in DATA i highlight, that row's data will be entered in to the correct spots on both COVER and TPA. when i highlight a different row, then the data will change to that row's data in both COVER and TPA (hope i'm explaining this correctly). right now i can only do 1 row by using (=DATA!$D$2). basically i want the '2' that is representing the row to be whatever row i have highlighted. if i highlight row 51 i want the formula to read (=DATA!$D$51). can anyone please help. i can put up a copy of the spreadsheet if need be, i am just hesitant cause of the confidential info. i would need to change the names and numbers to protect the innocent.
View Replies!
View Related
Average Row Of Numbers Using Different Row #'s
Field 1 input: Beginning Date (e.g 7/17/09) Field 2 input: End Date (e.g. 7/23/09) Need: Average costs on and between these given dates From table with this information: Date Market two 7/16/2009 80 7/17/2009 80 7/20/2009 82 7/21/2009 84 7/22/2009 82 7/23/2009 82 7/24/2009 82 7/27/2009 82 I need Excel to average Market two 7/17 to 7/23 (80, 82, 84, 82, 82) based on the dates I give it. If I change the date to 7/20 to 7/24, I then need excel to average (82, 84, 82, 82, 82) How can I get Excel to average based on different dates? Or basically, how do I get it to pull rows between 2 inputs?
View Replies!
View Related
Report The Value Of An Intersecting Row And Column, Without Numbering The Row And Column
# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523 Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2). In other words, if the inputs are the following: Input Cell 1: Rockfort Input Cell 2: Pysics Then, Output Cell should report: 25 I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.
View Replies!
View Related
Highlighting Active Field
Using excel (i think its 2000, work PC they are behind the times) and i was wondering if there is a way to automatically highlight the active field as i move around the cells. It would be easier to see where my cursor is.
View Replies!
View Related
If Cell Doesn't Start With Asterisk Delete Row
Sub DeleteRowsBasedOnCriteria() 'Assumes the list has a heading. Dim cl As Range For Each cl In Range("A6", Range("A65536").End(xlUp)) If cl.Value <> "=~*" Then cl.EntireRow.Delete End If Next cl End Sub but it is deleting every row, I am not sure what is wrong? starting in cell A6 if cell does not start with *, then delete entire row, next cell that is the logic im seeing...ive tried a few o ther combinations like "~*" etc...
View Replies!
View Related
Conditionally Lock Row Based On One Cell's Contents
I'm trying to figure out how to lock a range of cells (all in a row) when some puts a specific character in one of the cells. I have a sheet where I want people to enter data. Once they put a 'C' in the last column to indicate that the entry is complete, the whole row should be locked so they can't change any of the cells for that entry. There are some good pointers already on the forum to help me get the basics: Conditional Cell Lock Unlock http://www.ozgrid.com/forum/showthread.php?t=66397 http://www.ozgrid.com/forum/showthread.php?t=76379 However, all of these point to specific cells rather than a range of cells that can be located close to the target of the change.
View Replies!
View Related
Lookup Row In Column & Heading In Row
I'm trying to enter info in a cell based on what is entered in two other cells. So I have a dropdown box for the species on another sheet as well as a dropdown box for rail sizes. Then I have to crossreference them to come up with an upcharge number. Sorry for my basic lingo. I hope it's understandable.
View Replies!
View Related
|
TRACKER
