The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
View 2 RepliesI need to input a long list of steel sections in Excel. The steel sections have names like HEA200, HEA120, HEB 400, HEM300 etc.
I was thinking that this could be done easier by using codes for the section prefixes (HEA,HEB, HEM etc) and that the cell value would change automatically.
HEA=1
HEB=2
HEM=3
HD=4
UNP=5
etc.
For example:
I input "1100" - this would change on the fly to HEA100
I input "2200" - this would change on the fly to HEB200
I input "5200" - this would change on the fly to UNP200
I know I could do this by using a lookup function in another cell, but I want it all to happen in the same cell.
I have tried to use absolute references (perhaps I didn't do it right) but it didn't work. Below is the code that does work but I need to first make the sheet visible then activate it.
Sub Row_Sort(tmpsheet As String)
' Sort the first 4 columns of the tmpsheet sheet
Dim tmprng As Range
Dim OldActiveSheet As Worksheet
' Activate the desired workbook (in this case Linewkbk)
Workbooks(LineWkbk.Name).Activate
' Save old active sheet
Set OldActiveSheet = ActiveSheet.............
Is there VBA code that will:
a) change the color of the active cell?
b) return the formatting back when that cell is no longer active?
Here is a screen shot of what I have:
I want to be able to enter the name from the above 4 cells (B3,B4,B5,B6) IN THAT COLUMN, and have the active cell change color accordingly.
If I am in cell C7 and start to type "PUBLIX" It should turn red in color. It does not because the code looks to a specific cell (example: B3). What can I change in my code to give the results I desire?
I have conditional formatting code below I copied from THIS site:
Private Sub Worksheet_Change(ByVal Target As Range)
' Multiple Conditional Format
Dim rng As Range
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Adjust Format range to suit
Set rng = Range("B7:H74")
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
' Adjust conditions to suit
Select Case Target.Value
Case Range("B6").Value
Target.Font.ColorIndex = 50 ' Green
Case Range("B5").Value
Target.Font.ColorIndex = 3 ' Blue
' Case "Super"
' Target.Font.ColorIndex = 6 ' Yellow
Case Range("B4").Value
Target.Font.ColorIndex = 13 ' Purple-ish
Case Range("B3").Value
Target.Font.ColorIndex = 5 ' Red
' Case "Corporate"
' Target.Font.ColorIndex = 37 ' Light Blue
End Select
End Sub
Found code on this site to change the color of the active cell. One problem and two questions. Code works, however, when you save and close the last active cell is stuck with the new color. Question1 is it possible to limit this code to cells in column B only and fix the problem above? Is there an easier better way to get the same result. See Attached
View 2 Replies View RelatedI have a column with entrys of 2 kinds. Some being Hyperlinks and others with normal type data. All cells are locked with password except for cells that will possibly have entrys made in them.
Is there a way to move the active cell to R1C1 after any hyperlink clicked? R1C1 is unlocked.
I am still kind of new to using VBA code and my editing skills are very novice at the moment.
How would I change this Code to run on only the active cell selected and that is all, instead of the whole page?
Sub AddIFERROR()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Dim xCell As Range
Dim xFormula As String
For Each xCell In Selection
If xCell.HasFormula Then
xFormula = Right(xCell.Formula, Len(xCell.Formula) - 1)
xCell.Formula = "=IFERROR(" & xFormula & ","""")"
[code]....
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
ActiveCell + 9 columns.Interior.ColorIndex = Yellow
There has got to be an easy way to do this.
As i navigate excel, I was wondering how to change the background or highlight (instead of bold border) the active cell?
View 3 Replies View Related1. find the last cell used in a column when the rows that contain the data are hidden. I tried using Range("A65536").End(xlup).Select. but when the rows are hidden it doesn't give me the last cell used.
2. I am trying to restrict my search to just one row. When I try using the cells.find function it looks for the whole sheet but I just want it to search for some particular data in just one row or a specified range.
I have few column values to count. I don't want the hidden column value. In that formula the hidden value also counted. How to ignore that hidden column value count, using macro/formula.
eg:
col A - col B - col C - col D - col E - col F
Task -- ok1 -- ok2 -- no1 --- ok3 -- ok4
Col D should be hidden. Final count result should be: OK = 4; No=0
I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
View 3 Replies View RelatedI use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedIn my macro, I need to, from any column, move the active cell to column A, while remaining in the same row.
View 2 Replies View RelatedIs there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies View RelatedI am trying to perform a sort based on the ActiveCell.Column
I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data
I tried
Header:=xlGuess as well as
Header:=xlNo
Same result
What am I doing wrong?
Thanks
-marc
Private Sub comp_mySort()
Selection.Sort Key1:= Cells(1, ActiveCell.Column), _
Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies View RelatedIs it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
Is there a way to highlight the row and column of the active cell? The highlighting will move as the active cell is moved around the spread sheet. I have a newbie manager that is bugging the pea-turkey out of me! He wants to be able to easily see where he is within some of our sheets while he is in a vehicle or outside on a job site...seems like an "accessibility" type issue, but can't find anything in Excel "Options."
View 5 Replies View RelatedI want a macro which can filter the data on the basis of active cell
View 1 Replies View Related1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!