Go To Last Active Cell Column
Apr 7, 2009I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
View 3 Replies
ADVERTISEMENT
Find SECOND Last Active Cell In Column
Jan 15, 2010I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
Select Top Cell (row 1) In Active Column
Apr 23, 2014I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedMoving Active Cell In Same Row To Column A
Jun 28, 2009In my macro, I need to, from any column, move the active cell to column A, while remaining in the same row.
View 2 Replies View RelatedLocate The Last Active Cell In A Column
Dec 2, 2008Is there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedFind Name Of Column Active Cell Is In
Jul 7, 2006I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
Use Active Cell Row To Check Another Column
Dec 22, 2006I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies View RelatedSort By Active Cell Column
Jan 7, 2007I am trying to perform a sort based on the ActiveCell.Column
I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data
I tried
Header:=xlGuess as well as
Header:=xlNo
Same result
What am I doing wrong?
Thanks
-marc
Private Sub comp_mySort()
Selection.Sort Key1:= Cells(1, ActiveCell.Column), _
Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
Set Variable To Row & Active Cell Column
Jan 8, 2007I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
Macro - Moving Active Cell To Column B Of Next Row
Feb 14, 2012I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
Find Column Based On Active Cell
May 16, 2013How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies View RelatedHighlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Sep 25, 2009Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
Change Active Cell Value In Hidden Column
Apr 11, 2007The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
View 2 Replies View RelatedIdentify Active Cell And Use The Column To Add Formula To Another Cell
Dec 1, 2009I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
Highlight Row And Column Of Active Cell In Large Spreadsheets
Apr 4, 2013Is there a way to highlight the row and column of the active cell? The highlighting will move as the active cell is moved around the spread sheet. I have a newbie manager that is bugging the pea-turkey out of me! He wants to be able to easily see where he is within some of our sheets while he is in a vehicle or outside on a job site...seems like an "accessibility" type issue, but can't find anything in Excel "Options."
View 5 Replies View RelatedMacro To Filter Column On The Basis Of Active Cell Value?
Jun 28, 2014I want a macro which can filter the data on the basis of active cell
View 1 Replies View RelatedExtend Selection From Active Cell To Desired Column
Apr 15, 20081st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
Dec 2, 2009I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
Highlight Column And Row Of Active Cell But Retaining Previous Formats
Feb 28, 2014I have found this code by searching witch is perfect
Code:
If Target.Cells.Count > 1 Then Exit Sub
Application.ScreenUpdating = False
Cells.Interior.ColorIndex = 0
With Target 'With the cell that was selected,
.EntireRow.Interior.ColorIndex = 8
.EntireColumn.Interior.ColorIndex = 8
End With
Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.
Fill UserForms Controls Based On Active Cell/Row/Column
Jun 22, 2006I am attempting to write an Excel Macro that would allow me to Click on a particular row and have the fields in my form fill with the data in the columns of the row.
I am fairly new to Macros and VBA, but know that this has got to be a possibility.
Greyed-out Columns Based On Cell From Specific Column In Active Row Being Edited
Jul 7, 2014I am making a spreadsheet in which I have been asked to have certain column greyed-out based on an answer that was given in a dropdown menu. Specifically, a dropdown menu in column D asks if the client was a Youth or an Adult. Depending on what the anwer is, other columns in the spreadsheet will be greyed-out; different ones for each answer. My problem is, I need this to occur for the active row being editted. For example: The first row that the user can input data into is row 4. If D4 is answered with "Adult" then certain other columns are greyed-out. However, if the next time the user updates the spreadsheet with information for a different client (now entering information in row 5) and they select "Youth" for column D5, then different columns get greyed-out. The columns that are greyed-out will depend upon the answer for the dropdown menu in column D for whatever row is actively being editted.
View 5 Replies View RelatedExcel 2010 :: Macro To Filter Column Based On Active Cell Value?
Feb 25, 2014I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
Excel 2003 :: Highlight Cell On Same Row As Active.cell Whenever Active.cell Changes
Dec 10, 2012whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
Selecting Range From Active Cell To Last Entry In Same Row As Active Cell
Jun 8, 2014 I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm
From Active Cell To Last Used Cell In Column?
May 22, 2012I'm using the following code to select a cell based on a change to dropdown box.
Code:
ConsumptionStart = ActiveSheet.Range(ComboBox1.Value).Offset(10, 5).Address
ActiveSheet.Unprotect
ActiveSheet.Range("KD15:KD" & Range("B" & Rows.Count).End(xlUp).Row).ClearContents
ActiveSheet.Range("KE16:KE" & Range("B" & Rows.Count).End(xlUp).Row).ClearContents
ActiveSheet.Range("KF16:KF" & Range("B" & Rows.Count).End(xlUp).Row).ClearContents
ActiveSheet.Range(ConsumptionStart & Range("B" & Rows.Count).End(xlUp).Row).Select
I would like to select all of the data from the active cell to the last used cell in the column. Obvious, as i'm posting here, this isn't working as i intended. I want to select this data and then paste it into range KE16.
Value Of First Column In Active Row In ListObject
Feb 27, 2012I want the value of the first column in the active row in a ListObject. I've tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).Range.Address,
but don't know how to refer to the first column in this row. I've also tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).ListColumns(1).Range.Value ,
but it returns an error message.
Highlighting Active Row And Column?
Jul 28, 2014I am looking for a way to have the active cell row and column (standout). I did have it highlight but as users tried to highlight certain cells the active highlighting of the rows and columns would erase the color. So they are asking for something that can take its place with an on and off button to it.
View 5 Replies View RelatedTo Highlight Active Row And Column
Jan 6, 2008I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range)
Dim i As Long
Cells.Interior.ColorIndex = xlColorIndexNone
If Application. CountA(Target.EntireRow) 0 Then
i = Target.Row
Else
For i = Me.UsedRange.Rows.Count To 1 Step -1
If Application.CountA(Me.Rows(i)) 0 Then
i = i + 1
Exit For
End If
Next i
End If
Rows(i).Interior.ColorIndex = 6
End Sub
Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
Autofilter Active Column Non Blanks?
Mar 25, 2014I need a VBA code to do the following:
- The active cell i.e. the selected cell can be anywhere on row 11 (this is a merged cell with row 12 but I can unmerge if causes problems)
- The filter needs to be applied to the rows below the active cell (at most this will be about 10,000 rows below)
- I need to filter for non-blanks only
- Above row 11 there is one blank row and a number of filled rows; these need to be ignored i.e. excluded from the filter
- In this case I will need the filter to work on the cell with 'France Trade Product' in it
- The filter would need to hide rows below this cell except for row 16 where a non blank is found
FilterCapture.JPG
Select Specific Row In Active Column Using VBA
Oct 8, 2013I need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select