I am looking for a way to have the active cell row and column (standout). I did have it highlight but as users tried to highlight certain cells the active highlighting of the rows and columns would erase the color. So they are asking for something that can take its place with an on and off button to it.
View 5 Replies
Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
Using excel (i think its 2000, work PC they are behind the times) and i was wondering if there is a way to automatically highlight the active field as i move around the cells.
It would be easier to see where my cursor is.
I have a cover sheet to a workbook that holds hyperlinks to its relevent page. Several of the hyperlinks link to the same page but different relevant cells. However it is not overly clear which cell is active when you click the hyperlink. What I would like is for the active cell to be highlighted on the page. EG hyperlink 1 links to page 1 cell A2 & hyperlink 2 links to page 1 cell B6 - I would like A2 to be highlighted when accessed by hyperlink 1 & B6 highlighted when accessed by hyperlink 2.
View 9 Replies View RelatedI am trying to create a VBA code that will automatically highlight the row of an Excel table (2007) of the active cell. So far I have this:
Code:
If Not Intersect(ActiveCell, Range("Table_Name")) Is Nothing Then
Range("A" & Target.Row & ":EJ" & Target.Row).Interior.Color = 10092543
End If
Where the columns A and EJ represent the size of the table. But I would like to automate the column choices so that if the table has columns added or removed, the code still works. Is there a way to just reference a row of a table?
I found this spreadsheet on here and I have been trying to customize it to what I need. I am trying to have scores from skins match highlighted. I want only the minimum score to be highlighted but if there is another duplicate minimum score I don't want it to highlight anything. I also need to find a way to count the skins won by each player and have it off to the side.
For those not familiar with golf a Skin is a game where you try to get the lowest amount of strokes on a specific hole. Ex- 4 people play the hole one. P1 scores 4, P2 gets a 3, P3 and P4 get 6. The skin would go to P2 who has the lowest score on that hole.
Highlight lowest number in each column not highlighting if there are duplicates starting at L6 down to L11 and for each column till AC. And the same for the group just to the right on attached file.
On row 13 and 14 it tells me who won a skin. I want to tally up the total skins won by each player. so if Joe's names shows up twice on R14 I want it to tell me somewhere in the sheet Joe = 2
I have a worksheet, the data flows from different columns, like a,b,c and the result is in d column. The entries are spread from 1 to 45 rows. The format of data is five digit number. As I have formatted the cells as "custom" like "00000", the Zero is shown on left side, but when the column is copied/pasted in another column in certain entries zero disappears. Is there any way to get the 4 digit entries, highlighted, so Zero can be added on left side manually directly to the concerned entries, instead of checking each and every entry.
View 4 Replies View Relatedi am trying to get a VBA to find the value 'TRCO' select the row and highlight the row in red, i have tried the way below but i get an error saying 'type mismatch'.
If Range("b7", "b51166").Value = "TRCO" Then
Rows.Select
Selection.Font.ColorIndex = 3
End If
In Column A, there are about 2000 plus entries, is there a simple formula to highlight the duplicate values in conditional format, so that the duplicate values stand coloured.
View 2 Replies View RelatedI'm use with this macro to Highlight duplicate cells BUT the macro highlight only from the second duplicate
I need to highlight ALL duplicate cells in column A:A .
FUNCTION like " =COUNTIF($A$1:$A$11,A1)>1 " it's not good for me in this case, i need it with a fast macro
I have a query relating to conditional highlighting - specifically highlighting a cell's column and row based upon whether it contains data or not i.e. if it is blank, it's column and row remain unhighlighted, but when it contains data, it's column and row should become highlighted. I could probably manage this myself but I have a few more specific requirements which I have illustrated with a few screenshots, however I can't see how to make these available to view here!I
View 1 Replies View RelatedAny code or formula to highlight the intersected cells between a column and a row for any selected cell ?
Ex: if i select E25 the cells of column E1:E25 as well as the cells of Row A25:E25 to be highlighted in a certain color , and so on for any selected cell..
I am running Excel for Mac V2008.
My spreadsheet has various columns with column A representing dates of a 6 month period formatted as: ddd d-mmm-yy, one day per cell.
I want to highlight the cells which are Saturdays and Sundays and are not working days for my Plant.
I think it may be done using conditional formatting, but I have been unable to discover the right formula which would allow this to happen.
I want to write a macro that highlights duplicate values within a single column. I found - on this site a macro that removes duplicate values, which is huge, but sometimes I just need to highlight duplicates values rather than remove them.
View 2 Replies View RelatedI have a large compilation of data on an excel work sheet (I am using 2013). All cells relate to each other by means of dates, names, and other numeric values such as stock numbers, id numbers etc... In one column some stock numbers are repeated. I would like to know if there is a way to set up the program on this worksheet to highlight all repeating stock numbers, not only in the column but across the cells as well, in lieu of doing so manually.
View 1 Replies View RelatedI want to have Excel highlight one or two numbers/cells in one column based on the value in another cell. I am attempting to do this using Conditional Formatting.
For example, if X1 is BETWEEN A2 and A3, I want to highlight A2 AND A3. I have used various AND and IF functions to achieve this goal.
Also, if X1 is EQUAL to A2, I want A2 to be highlighted. This is easy to do with a simple formula.
But my problem is this: if X1 is equal to A2, I want ONLY A2 highlighted. If X1 is between A2 and A3, I want BOTH A2 and A3 highlighted. I cannot figure out how to achieve both. For example, when X1 = A3, A2 AND A3 are being highlighted, instead of just A3. I would prefer to do this without a macro, if possible. Can this be done?
Example formulas I have tried which easily achieve the highlighting of two cells when the value is between them:
Condition 1=IF(AND($I$35>I8,$I$35<I7),1," ")+IF($I$35<>I7,1," ")
Condition 2=IF(AND($I$35<I6,$I$35>I8),1," ")+IF($I$35<>I7,1," ")
It appears that the +IF, etc. functions are not doing anything.
This is more complicated by the fact that the value of, in the above example, I35 is based on a value from another sheet (I used a function to transfer a value from one sheet to I35 in the other sheet). As data are entered on Sheet1, the value in I35 in Sheet2 changes.
I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
View 3 Replies View RelatedI want the value of the first column in the active row in a ListObject. I've tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).Range.Address,
but don't know how to refer to the first column in this row. I've also tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).ListColumns(1).Range.Value ,
but it returns an error message.
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range)
Dim i As Long
Cells.Interior.ColorIndex = xlColorIndexNone
If Application. CountA(Target.EntireRow) 0 Then
i = Target.Row
Else
For i = Me.UsedRange.Rows.Count To 1 Step -1
If Application.CountA(Me.Rows(i)) 0 Then
i = i + 1
Exit For
End If
Next i
End If
Rows(i).Interior.ColorIndex = 6
End Sub
Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedI need a VBA code to do the following:
- The active cell i.e. the selected cell can be anywhere on row 11 (this is a merged cell with row 12 but I can unmerge if causes problems)
- The filter needs to be applied to the rows below the active cell (at most this will be about 10,000 rows below)
- I need to filter for non-blanks only
- Above row 11 there is one blank row and a number of filled rows; these need to be ignored i.e. excluded from the filter
- In this case I will need the filter to work on the cell with 'France Trade Product' in it
- The filter would need to hide rows below this cell except for row 16 where a non blank is found
FilterCapture.JPG
In my macro, I need to, from any column, move the active cell to column A, while remaining in the same row.
View 2 Replies View RelatedIs there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies View RelatedI am trying to perform a sort based on the ActiveCell.Column
I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data
I tried
Header:=xlGuess as well as
Header:=xlNo
Same result
What am I doing wrong?
Thanks
-marc
Private Sub comp_mySort()
Selection.Sort Key1:= Cells(1, ActiveCell.Column), _
Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
