My purpose is to compare date fields in two worksheets and have the formula tell me if the dates match. I took care to make sure the dates were true date using =datevalue()
Second, I used the formula one column over to evaluate invoice numbers and it worked though in the few that did not match it returned #N/A and not NoMatch.
Can somebody have a look at the workbook that I've attached.
I have set up a timeshhet calculator for work but the thing is, the hourly rates of pay are dependent upon the day of the week the Operative is working, and the time of the day.
We split the shifts AM & PM and the rates are decided as per the worksheet contained within the workbook "Rates".
The problem I am having is how to get the timesheet to understand the days.
For example, if an Op works the Sat night or Sun night, then the rate should reflect x1.5. If it's Sat/Sun daytime, then it's x1.25.
Again, and as per the "Rates" sheet (see top for the rate multiplier) Mon - Fri 09:00 - 17:00 is flat rate/standard hrs. If the work Mon - Fri evenings, then the rate is x1.25.
I have a formula which works (to the extent that it returns a value), but if I try to use the Evaluate Formula function, it fails at the first step, returning the "=name?" error. The formula does contain a number of named ranges, but these do not appear to affect it's function.
I am trying to loop through some rows within a worksheet in an effort to make sure the values match a list of values that are defined in an array. However, when I get to the IF statement, I always get a 'Type Mismatch' error.
Dim varRetailers varRetailers = Array("Depot", "Lowes", "Sears", "TSC", "Walmart", "Z-Other")
For c = rowDataStart To rowDataEnd If Cells(c, colRetailCat) varRetailers Then '
HI can't seem to get this last scenario laid into this if statement. I am having trouble with the second statement. I need the three cells to equal 100, but only when all three are filled. If only two as in this scenario I would like % Error in cell G2.
Sheet3 *DEFG250%50%*O.K.Spreadsheet FormulasCellFormulaG2=IF(SUM(D2:F2)=0,"",IF(AND(OR(ISBLANK(D2),ISBLANK(E2),ISBLANK(F2)),SUM(D2:F2))=1,"% Error",IF(OR(D2>E2,F2>E2,SUM(D2:F2)1),"% Error",IF(SUM(D2:F2)=1,"O.K.",IF(AND(E2>D2,E2> Excel Jeanie HTML 4
If Not IsEmpty(ActiveCell.Value) And ActiveCell.Value >= 4050 Then
The code in the above if statement is running when I hit a cell with no contents. When there is no such cell, it works fine. I've tried using "" as well but the same thing happens.
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it. > Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
I am working on a customer report template that generates our customers reports and will send them out automatically.
This issue I have now is that the system that generates the raw data for these reports only lists the Customers name in a column with an entry for each line of data, the thing is though that the system has lots of variations of the customers name, even more so if that customers has different departments.
What I need to do is from this list of customer names, I need to automatically figure out what the "common" name is or main name so to speak, and then make a variable using the correct full name, which will be used later on in the code to import correct logos, and direct the reports to the correct people.
Here is a quick example of what data we get raw from the system:
Customer Name: John Build Johns Buildings Johns Ltd Building Johns Plumbing Department Glass Doors Ltd A Department of Johns Buildings Johns Building Corporation Hole In One Golf Range
This is just an example, we have thousands of clients, so the length, number of words etc can change alot. Ideally I from a list similar to that I would get a full proper result of "Johns Buildings Ltd" for example, this would then be in a variable to be used in code from then on to reference doing certain things with the reports of Johns Buildings Ltd.
You'll notice there is one name "Hole In One Golf Range" that seems to have no relation at all, this is correct, ideally I would also like to build in some error checking into the code, so that rows like that that have nothing to do with the others would get deleted.
So how would you amazing VBA gurus go about working with data like this? I'd prefer a more general answer with explainations that just straight code, as I'm sure I will have to adapt the hell out of it for it to be useful in context.
I have attached a sample work sheet that has the directions and a sample.
I want to use vlookup (or any relevant formula) to find a value in a table if it falls between two dates. The sample worksheet does a lot better job explaining this.
For instance, if I want to find 3/1/15, it is between 2/1/15 and 4/1/15, so I want the dollar amount to be $8.75
I have 2 Tabs. 1) Furnaces --> INPUT 2) Report --> OUTPUT
1) I have this speadsheet and every day i entry new information: Date Furnace# Burner 6/1/2009F-11 6/1/2009F-513 6/1/2009F-512 6/2/2009F-16 6/3/2009F-15 6/4/2009F-14 6/4/2009F-514 6/5/2009F-511 6/6/2009F-12 6/7/2009F-11
2) I want in this tab to get information from the other tab (Furnaces) in order to have an every day control.
I am making a spreadsheet using excel 2003 to calculate sales and tax. Column B is formated for date (1/1/2010). Column D,E, and F are formatted for currency with column D=Total Price, column E=sale price, and column F=tax. In column B I type the date the transaction took place and in column D I type total price. Columns E and F are automaticly filled in with the formulas for same. In column H,I J row 9 I would like to calculate 1st Quarter Total Price, Sale Price, and Tax. Row 10 would hold 2nd Quarter info and so on. I searched for info but can't come up with any thing that works.
I'm having trouble comparing two lists of clients with vlookup. The problem seems to be that the dates are in two separate formats. I'm combining the information to create unique identifiers (=A1&B1&C1).
Here is an example of what I am trying to do. I have a date in column A on Sheet 1. In Column B I want to return the period for which that date falls.
I have created a list of Start and End dates for each period in Sheet2. The start date is in Column A of Sheet2. The End Date is in Column B. And the resulting Period is in Column C.
Basically if the Date in Sheet1 Column A falls in between the start and end date for a specific period. I want that period returned in Column B of Sheet2.
I have two tables which both have two columns. One column has dates in it e.g. 01/09/04 and the second column has a number in it. What i am wanting to do is create a combo box that, when i select the date from the list, it brings up the number (that is in the cell next to it) and puts this number into the cell next to the combo box.
I know how to get the combo box and add the dates to the list, but how to bring the dates up.
I have tried creating a combo box with the dates and then formatting it to create a cell link. This link then brings up the first number of the date in the cell i have chosen. I have then selected a blank cell and entered the formula :
VLOOKUP(lookup_value,table_array,col_index_num)
However, when i have tried this, it hasn't worked.
in column K, I am trying to setup a Vlookup statement that states if the month and day in column I = the month and day in column J then return the value in column J.
I have the following formula, but it just returns N/A.
I have a two sets of data, from two different programs (Excel and Access), were the dates are not compatible with each other in vlookop in excel. The problem seems to be in the decimals of the datevalues, which I have been trying to solve the problem in various ways. The only thing I can get to work is to trunc the dates to get rid of flawed decimals somewhere in the end of the datevalue.
My question to you is how many decimals I should use when I trunc in order to keep the right date in the format of (yy-mm-dd hh:mm). So far, 10 have proven unsuccessful (=trunc(A2,10)), but 8 seems to work. I wonder if I can decrease that number even more and still keep the format above?
I'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.
I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.
Private Sub Upd1_Click() Dim rader As Double
Dim lookrng As range Dim updvalue0 As Double Dim updvalue1 As Double Dim updvalue2 As Double Dim updvalue3 As Double Dim updvalue4 As Double Dim updvalue5 As Double .........
I have a table that shows a row of dates, a row of campaigns, and then a row of values I need to reference. I need to pull the values for a specific date and corresponding campaign.
For example, I need to pull the value for campaign 'notset' on 6/16/09.
I tried the following, but it would only work on the first and last campaign: ...
does it not like dates? i have columns of data and i wish to search it for each month and then print a months worth. here is part of the data. maybe vlookup does not like dates? i tried putting an index column on the left, 1,2,3,4... but it still would not pick up "Jun"
Basicly i have a list of information and i need to be able to enter a start data in one cell and a end date in a different cell and then return all the dates between them.
I am attempting to find a way to search through a database I created based upon every day of the year. My goal is to have a user input a beginning date and end date for a trip, then my functions will return the range specified with each day and it's individual temperature average (in my database).
I also need generating the dates between the start and end dates that are entered by the user. I was considering combining Days360 with an Hlookup that searches through a massive sheet with all the dates for the upcoming year and then going down 1 in the column for the difference in the dates in each column.
I am trying to set up a spreadsheet which automatically calculates the start and end dates of project tasks, by looking at the order in which tasks need to be completed. I have attached a spreadsheet to show what I am trying to do.
I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table  ABC3Row LabelsSum of DebitSum of Credit 413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012 18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
I'm trying to make a simple chart, which maps the value of an investment fund over time. I wanted to use the new 'Table' feature within Excel 2010 to format and maintain the formulae within the Table, and the 'Header' for the table contains the date, which is not at regular intervals.
If I opt not to use the Table feature, I can create a line-chart with ease, and Excel recognises that the Dates are indeed dates and plots the graph correctly. The minute I convert over to a Table, the Date headers are no longer recognised as dates, and are instead plotted as if they were text, at regular intervals.
I've tried multiplying the Date Headers by 1 to force them back to true Dates, but this still does not work. I've also changed the setting on the horizontal axis to Date axis rather than automatic, but still no joy.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
