How Do I Automatically Have Information Filter Into Existing Worksheets
Jul 23, 2008
I'm trying to build is a master Excel sheet for a company-wide budget tracker, where our supply person enters in information on individual orders. Those orders would be broken down in separate worksheets based upon department.
So, let's say you have three departments. Each department has an identifier code (Human Resources would have HR, Operations would have OP, and Research & Development would have RD.) Each order number is prefixed with the department's code, then the other columns deal with dates ordered and received, cost of the order, and any notes on the order.
What I'd like to be able to do is to have each order be automatically filtered out to secondary worksheets, based upon which department the order belonged to.
I have seen a macro that allowed one to push a button and break data out like that, but the problem is that it created new worksheets each time, and I want the department worksheets to stay the same (since each of those can expect to have starting budget figures updated by the supply officer.)
View 9 Replies
ADVERTISEMENT
Aug 1, 2008
I have created a spreadsheet that I must fill out daily. this worksheet has averages that must be automtically shared with a "master" worksheet.
for example
information from sheet2!b23
information from sheet3!b23
information from sheet4!b23
etc...
must automatically be transfered to
sheet1!c6
sheet1!c7
sheet1!c8
etc...
in that order
at this time I am typing in =sheet2!b23 on sheet1 everytime, I want to avoid this.
If you are asking yourself why? I dont blame you but it needs be this way so I can average each days spreadsheet.
View 5 Replies
View Related
Feb 20, 2009
How to automatically filter can filter and blue-colored cells.
View 4 Replies
View Related
Aug 7, 2008
how can i automatically add one day to an existing day..
a
1 Monday
in b1 what would be the formula for tuesday..
=a1+1
?
View 9 Replies
View Related
Apr 5, 2013
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
View 1 Replies
View Related
Nov 20, 2008
In the attached workbook I have 3 sheets. The first 2 with the names starting with WO are individual sheets based on a single scaffold rental. The "Standing Equipment" worksheet is adding the components from the other two worksheets. Easy enough, but I am looking for either a formula or some VBA guidance on how to have the "Standing Equipment" worksheet automatically change it's formulas to incorporate new worksheets as they are either added or deleted, thus avoiding constant formula editing as scaffolds are erected or dismantled.
View 3 Replies
View Related
Jul 7, 2014
I want to create 4 quarter sheets at the same time, but my code could only process 1 quarter sheet each time. Also, I have trouble of copying and pasting the values from yearsheet to the quarter sheets. ( see attachment document )
View 5 Replies
View Related
Feb 12, 2008
I'd like to create a macro that can access few existing worksheets from different workbooks and print them automatically when i press the button or select them.
Tried userform and listbox that were suggested from other thread, but that didnt work quite well since I'm not quite understand the code behind it.
View 9 Replies
View Related
Nov 20, 2013
Suppose there is an existing ms excel file. There are some data inside, taking 5 columns. Here is what I want to do:
I want the excel file to automatically generate a new column, the 6th, when the file is opened, say double-clicked.I want the 6th column do some summation based on the indexing/flag information int he 4th column, and the values from 5th column. For example: Suppose 4th column has binary entries (1 or 0). If the entry is 1, then pick the entry in the same row in 5th column, and do the summation for all this kind of values (values in 5th column with a 1 flag in 4th column)
View 2 Replies
View Related
Dec 20, 2013
How I could generate a report using a Command Button. I have a spreadsheet that contains data in columns, some of which I want showing up in the summary report. Any new data entered should be updated in the summary report when I hit the command button. Existing data in the original spreadsheet does not get erased or written over.
So basically, I have data in column range A:R in Sheet 1. Columns A, D. E, F, G, I, J, P, and R need to show up in the report on Sheet 2. I already have 150 rows of data in sheet 1, so i don't want to start over. So I need to copy the relevant columns, and update the report with any new data that gets entered in the columns in Sheet1, in the next empy row.
I have some vba code that copies individual cells, but I don't know how to do it for columns and for new data.
View 4 Replies
View Related
Jan 11, 2013
I'm attempting to add a variable number of worksheets (dependant on the number of entries in an existing list), then rename those sheets to the name of the entries in that list. i.e.
LIST
A
B
C
With the list above, i'd want 3 new sheets added, one named 'A', one named 'B' and one named 'C'.
The trouble i'm having is that because the number of entries/sheets varies, i don't want to refer to 'Sheet1' 'Sheet2' etc. to rename them.
***Additional Info*** the first record in the list is always "W4" on sheet "Data"
Below is where i've got to so far (however, i'm pretty new to this so it's almost certainly not all that efficient!)
Sub setup_1()
Sheets("Data").Select
Range("W4").Select
[Code] .......
View 2 Replies
View Related
Mar 7, 2014
What I need:
-Master worksheet copy/populate child worksheets at the press of a button or automatically if possible.
-If copy pasting, it needs to overwrite the original data and not just duplicate it underneath in the child sheets.
-I tried using the code from "[URL] ......" but could not tweak it quite how I wanted.
-Any unique values without a child sheet, just ignore and leave in the master sheet or ideally add them into their own child sheet
I have multiple other macros going. Some details about my sheet:
-My table headers and filters come down to "A13:R"
-All my information starts on "A14:R" which is what I want sorted. All of my worksheets have the same heads/locations.
-The column "I" is where I want to take my info for sorting from. For example "I14" = grapes, "I15" = apple, "I16" = grapes. etc. So i would like all the apple rows to automatically go to the "apple" worksheet and the grape rows to the "Grape" worksheet.
View 9 Replies
View Related
Jul 7, 2007
firstly i am cross-posting this topic so here is the URL to the same thread in a different forum.
[url]
whats up everybody? i have to use two excel worksheets that someone else already created to make CSV (comma seperated value) files. these CSV files are to be dumped into a database. the problem is that the table has more fields than the spreadsheet does (the spreadsheet has 3 fields - network, mask, size - and the table has 10 fields). i can insert one entire column before (to the left of) network (for the ID field in the table) without a problem, but when i try to insert entire blank columns after size (to the right of the pre-existing columns) it only makes columns for the first 14 rows. i know this because when i save it as a CSV file there are only 6 extra commas for the first 14 rows. is there a way to insert an entire blank column for the entire spreadsheet (as in all the way to the bottom)? i dont want to have to manually type in all those commas. i am using excel 2002.
View 9 Replies
View Related
Apr 29, 2014
I have been struggling hard to pull information out of a table using vlookup and match & Index functions. It does not seem to be working. Below is my criteria:
I have a data of call centre agents with names , dates and calls offered answered details. On another sheet i have given a list of names of agents in a drop down list and all the dates of the week. Now i want that when a user selects a particular agent name from the drop down list, the data fetched under '07042014' date column is against the number of calls answered by the selected agent on this date. I have 5 columns of title '07042014' , '08042014', '09042014', '10042014' and '11042014' Capture.PNG. Attach is the file how it looks like.
How to use match and index function or any other function to fetch information against this date as per the agent selected.
View 3 Replies
View Related
Sep 5, 2012
I am having a problem filtering information within mulitple columns. I do not understand how the advanced search works either, so let me try to explain what is going on. I would post a pic of the table to make it easier to understand if I knew how to.I have thousands of rows in Column A with information, for this scenario a number. Thing is that all these numbers are seperated by many blank rows.
Ex: Row 1 has a number, Rows 2-10 are blank, Row 11 has a number, Rows 12-24 are blank, etc. Over in Column C, for every row that has a number in Column A, there is a corresponding number in Column C followed by Rows of numbers. ex: Row 1 Column A has corresponding information in Rows 1-10 of Column C.If this is clear, understand that this repeats for tens of thousands of lines. When I am looking for a specific number in Column A, I do a filter for just that number.
When that happens, it only brings up the info from that same row in Column C. I need the filter to bring up all ten rows of info in Column C that correlate to the row I filtered in Column A. I know the easiest way is to label all the rows in column A with the same number, but the reason the blanks are in place is so it is easier to read the breaks between the different information.
View 1 Replies
View Related
May 19, 2014
(Code at the bottom of this message)
I have a file with a roughly 20 workbooks. I need to split the data in each workbook into two sheets, rename each sheet, then export the data to template with multiple sheets. After splitting the data into the appropriate sheets in the original workbook, Sheet1 in has only 1 row (plus header) and needs to be transferred to "Project Entry" in the template; Sheet2 can have any number of rows (less than 100) and needs to be transferred to "Activity Entry" in the template. I need to save the template based on the value of cell A1 on "Project Entry" sheet of the template. The organization of the columns in the original workbooks is different than that of the template, so this is not a straight copy and paste operation. The cell formatting in the template must be retained.
I have half of this under wraps. I've cobbled together some code that splits the original data where I need it split, copies it to new sheets and saves the files. I now need to figure out out to get it out of this saved file and into the template.
The crosswalk of values between the original data (Sheet1) and the template(Project Entry) needs to look like the below. So, variable 1 exists in column B of the original and needs to populate column B of the template, and column Q in the original needs to populate column G in the template. The variables and column relationships are different for Sheet2/Activity Entry.
SPREADSHEET COLUMN
Variable
Original
Template
[Code]....
View 3 Replies
View Related
Feb 22, 2007
In column A I have various part numbers with alph-numeric characters. In column B I have a similar list. In column C I have the quantities for the part numbers in column B.
What I need is for say a macro or forumla to look at each part in column A and match it with the part in column B and in column D insert the appropriate quantity from column C.
I'm not sure if this falls under say a filter, extraction or search type of function.
View 14 Replies
View Related
Feb 9, 2012
I have a large itemised call bill that i need to do some regular analysis on and wondered if I could automate most of it.
In column C is a list of mobile numbers, in column F the numbers they called (this is an itemised bill so each line represents one call, meaning each number has multiple rows) finally in column K is the cost of each call.
I want the macro to look through column F (number called) and if there are less than 5 instances of that number that are under 0.30 each in cost to be deleted.
Example: if in column F the number 07500 100100 appeared once with a cost of 0.29 I want it deleted but if it appears 6 times with an accumulated cost of 3.50 i.e. more than 0.30 per call averaged out, then i want it to remain on the sheet
View 3 Replies
View Related
Nov 19, 2013
Is there a way to edit my database located on sheet 1 using the advanced filter (output) on sheet 2?
I have a gigantic database and I want to filter it down to the rows I need to edit.. so I used advanced filter to extract the rows I need on to another sheet. But if I edit the rows on sheet 2 how do I makes those changes reflect on sheet 1 (the full database)
View 2 Replies
View Related
Nov 30, 2008
I have a sales sheet that records every sale as it comes in. I want it to copy the relevant information (only that sales reps sales) into each sales reps individual sheet automatically so that I can send each rep his own sheet. Can this be done? SEE ATTACHMENT
View 2 Replies
View Related
Sep 3, 2009
I have a worksheet that lists all employees (past and present) (Worksheet A). I have another worksheet that I am sent from our training department that lists monthly test scores (Worksheet B). The worksheet containing the test scores only contains current employees, and the employee list changes from month to month.
Is there any way to have Worksheet A match up employee John Q. Public with the row for John Q. Public's in Worksheet B? I would like to be able to import the test scores automatically regardless of which row the employee in on in Worksheet B.
View 2 Replies
View Related
Nov 8, 2013
I'm wondering if it is possible to make a table where I can just enter the reference number and excel can fill up the remaining cells with data specific to the reference number from a website. What I mean is that I would like to put in company registration number and hopefully it will be able to pull in other data from companies house website about the company.
View 2 Replies
View Related
Aug 10, 2012
I use a spreadsheet (FY-2012) to track approx 700 work requests. I enter the work request number (name of the spreadsheet) in column A, which is hyperlinked to the actual work request spreadsheet. I would like to automatically fill in this cell with the information entered in cell J42 of the work request entered in column A. Cell A5 of the tracker "FY-2012" indicates Work Request "BB-12003". Cell D5 of the tracker "FY-2012" indicates the completion date. I would like to extract the completion date entered in cell "J42" of Work Request "BB-12003" and have it automatically fill in Cell D5 of the tracker "FY-2012".
View 1 Replies
View Related
Apr 18, 2008
I have created a spread sheet that uses the LOOKUP function to pull information from elsewhere in the sheet and automatically fill in a cell so that I can save time.
The spreadsheet has several columns with a single word or number but the column used for the lookup contains 2 words, 1 number and a “#” sign. I have used the “CONCATENATE” function to create a column that has all the words, the number and symbol and then my formula says to LOOKUP the value in the created column and return the number associated with that LOOKUP value. The problem is it will not give me the correct value. All cells with the formula return a value from the same row in the LOOKUP table no matter what the LOOKUP value..
I have used this exact same formula (copied and pasted it) in another place in the table with the LOOKUP information added by hand, not generated with the “CONCATENATE” function, and it works fine.
View 9 Replies
View Related
May 16, 2014
I am trying to sort information on my worksheets by date, oldest to newest however this does seem to be working on the workbook i have attached.
View 3 Replies
View Related
Jul 11, 2012
I need to link information between two sheets.
In Sheet2 I have a list of products with their description in adjacent columns such as prices and other information. Sheet1 is a MasterSheet of some of the products listed in Sheet2. So I would like to write a macro that links the information of the product from Sheet2 to Sheet1 if I type the products name in Sheet1 (MasterSheet). The list of products (Sheet2) is updated in a regular basis, so by linking the info I would just need to update Sheet2 and Sheet1 would update as well.
View 4 Replies
View Related
Feb 18, 2010
I have a master project worksheet that has projects on it and costs it looks like the following.
Master Project Sheet
ABCDEFG1
Plumbing
Plumbing Invoice
Electrical
Electrical Cost
Flooring
Flooring Invoice
2Project 001
ContractorName
Invoice Amount
ContractorName
Invoice Amount
ContractorName
Invoice Amount
3Project 002
ContractorName
Invoice Amount
ContractorName
Invoice Amount
ContractorName
Invoice Amount
Individual Contractor Invoice ABCD1Project 001Job PerformedContractor NameAmount
** Note all invoices are in the same folder
I essentially would need the Master Project Sheet, to have instructions to say. Research the folder of invoices, when you find project number 001 and plumbing (job performed), then grab C1 and D1 off of the contractor invoice and place it into the corresponding project name on the master, in the case above B2 and C2. Is that possible?
View 9 Replies
View Related
Apr 26, 2014
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
View 1 Replies
View Related
Mar 27, 2009
i'm have a master spreadsheet of contact details and categories. i want to be able to pull contact information onto other sheets within the same workbook, based on category. example attached.
View 5 Replies
View Related
Oct 23, 2008
I have inserted the sheet. As you can see in Sheet 1 I have the Store, Address, Town etc, I would like a drop down box in D13 ( Store Name ) so when I select a store it will automatically fill all the info into D15:D19 Address, Town etc. The info will be pulled from Sheet 2.
View 3 Replies
View Related