How do I graph (scatter or line) a series of values that contain blank cells in the y data series, without them coming up as zero values on the graph.
If the y value is blank, I do not want this data point plotted at all....
see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.
View 2 Replies View RelatedHow can i exclude Blank or cells that have a 0 when plotting my graph? Right now everything is very small because i have about 50 cells, some with quantities and some with zero quantities.
View 9 Replies View RelatedWhat can I have the IF statement return as a result that will NOT graph at all. Just leave a hole in the graph.
Long Question:
I have a large range of values and dates.
1/1 1/2 1/3 ....etc
10 11 7 .......etc
8 12 6 .....etc
These values are pulled via VLOOKUP() from various places. When VLOOKUP finds a blank cell, it returns a '0', which doesn't work for me. I've added an IF(ISBLANK), to return "", which is (I believe) an empty cell. The problem is, this is still graphing as a zero. So it will be graphing along nicely, and then shoot down to zero and back up again.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I have a graph that references a column which contains a formula. In the instances where this formula produces a zero value or a DIV/0 error, I would like the graph to contain a blank space.
As it is now, the zero or DIV/0 cell graphs as a zero value. I have tried using an IF statement which takes any zero or error and replaces the cell value with "": IF(A5/A6=0,"",A5/A6)
Even though the cell comes up as blank... a zero value still appears on the graph. The only way for me to have the graph ignore that cell is to go into the cell and delete the formula. This is unnacceptable b/c the data is updated daily... I do not want to have to go through my data every day and delete cells.
I am making a program that several people are going to be inputting data into.
I selected a huge range to ge graphed, so people could simply add their data and it would atomatically appear on the chart. The problem is, that I don't know how much data I am going to get in total. I want to select a range, but only have it appear on the chart if the cells are not empty (I don't want a ton of empty slots on my chart).
This is the basic idea I was trying to work with even though this particular one is not correct. I am trying to set my range only equal to the cells that do not = 0.
Sheets("Graphs").Select
ActiveSheet.ChartObjects("Chart 12").Activate
Set graphdata = (Range("F30:IT31") <> "")
ActiveChart.SetSourceData Source:=Sheets("Data").Range(graphdata), PlotBy _
:=xlRows
ActiveChart.ChartArea.Select
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedI would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can I graph merged cells, without graphing gaps or spaces of the skipped cells?
View 12 Replies View RelatedI'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
=IF(C2=ISBLANK, B2, B2&": "&C2)
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx