How To Achieve The Result Of Cell Date Activation
Dec 8, 2012
I want to activate a specific cell on a specific day...namely today.
I have a excel spreadsheet with various dates that when it reaches today i want another cell to activate and be shifted to the active cell.
I have the following columns:
Date of transaction Earned Points this transactionActive PointsActive date of pending points Pending Points
07 November 2012 R 40.00 08 December 2012 R 40.00
Now, i want the pending points to activate and be shifted to active points on 08 december 2012. my active date of pending points columns is automatically calculated from 07 november 2012 by formula =C3+31
View 1 Replies
ADVERTISEMENT
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Oct 5, 2009
I created two macros to achieve my objective. I used the "record a macro" function, which probably creates very ugly codes. My first code formats raw data in a certain fashion so that it can be easily extracted; I understand this code fairly well and have been able to make alterations to it with ease.
The second macro takes values from the formatted data and plugs them into a table. Unfortunately, the code that Excel wrote is very confusing to me.
Essentially, the data follows a pattern (new entries occur every 14 rows), but Excel's automated code is tedious to program. Here's an example:
Columns("R:R").Select
With Selection.Interior
.ColorIndex = 11
.Pattern = xlSolid
End With
Range("T2").Select
ActiveCell.FormulaR1C1 = "Acct"
Range("U2").Select
ActiveCell.FormulaR1C1 = "Org Name"
Range("V2").Select
ActiveCell.FormulaR1C1 = "Pmt Type"...............
View 10 Replies
View Related
Feb 27, 2008
I’m trying to resolve this issue and would appreciate some help.
Scenario
I have a tracking sheet that tracks development of work to be completed by individuals.
I have a due date column that shows when the work should be completed.
Once the work has been completed, the user enters his completion date.
I have a formula that provides an overdue warning (Completion date – today’s date) and some conditional formatting.
Problem
When I copy the formula through all the cells in the column I get a number (example 39504) and this changes everyday.
How can I eliminate this being shown as it throws out my average development day calculation?
View 4 Replies
View Related
Jul 28, 2009
I trade the stock market and am trying to get excel to automatically calculate the required quantity of shares to be purchased in order to achieve a particular breakeven point. Question: How many shares required at a price of 37.30 to achieve a breakeven of 36.24 when I already have 8000 shares at a price of 34.73? I'm looking for the formula to solve this not just the answer.
View 9 Replies
View Related
Apr 29, 2014
I am brand new (Day 1) to VBA programming and I am running into an issue when trying to activate a sheet based on the value chosen in my userForm that I cannot seem to solve. The error seems to be a compile error and says I am missing and End statement to one of my If Then statements, specifically:
Compile error: End If without block If
I thought if the If Then statement was all on one line that I would not need an End If statement. In fact, if I try to add an End If statement, I get an error (all proceeding text turns red).
This is the part of the code with the End If error.
[Code] .....
View 14 Replies
View Related
Mar 21, 2014
This code is to find a number in Col F that is designated in E6. Currently hitting Enter will run the macro, where in the code can I change that run command to another key besides Enter or a form control button?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
If Target.Address = "$E$6" Then[code].....
View 3 Replies
View Related
Jun 15, 2009
I'm just trying to fine tune my project to making users enter specific data into fields C17 and C19 [eg enter the word "hello" in C17 and the word "goodbye" in C19] before the command button is activated.
The existing code i am using [below] activates the command button when anything is entered.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("C17, C19")) Is Nothing Then
If Not IsEmpty(Range("C17,C19")) Then
Me.Shapes("CommandButton1").ControlFormat.Enabled = True
Else
Me.Shapes("CommandButton1").ControlFormat.Enabled = False
End If
End If
End Sub
View 9 Replies
View Related
May 14, 2006
Currentley I have a worksheet(2)containing data updated from another woorksheet(1). I have a command button which runs some code for a filter ( recorded macro). can I run this code every time the worksheet(2) is activated instead of using the command button?
View 9 Replies
View Related
Aug 23, 2007
I have a macro that returns a lot of data and I need it to automatically resize the row in which the data is being returned. Here is an example of what I mean:
Function MyMacro()
ReturnString = "help" & chr(10) & "me"
MyMacro = ReturnString
' resize the row
' need to define "Location", based on the location of the cell in which the data is being returned
Rows(Location).EntireRow.AutoFit
End Function
Even if I specifically hardcode the location of the row to be resized in the macro, it still doesn't work. The cell has "Wrap Text" turned on.
View 4 Replies
View Related
Feb 13, 2013
I am tired of doing the same amount of repetitive work, I would like to know if it is possible to acheive a "template" where I just drop a database pull and it negotiates where the data should fall.
When I pull data, I have the following values I need -
Part number
Date - which is by day, I need grouped by Monday - Sunday to seperate amounts ordered by week.
Branch plant - East and West
Order Quanity which is placed by day
QOH - Quanity of parts I have on hand
I need the days grouped by weeks, 7 days by date equal 1 week.
I need summing part number amounts due within that 7 days into one total.
I would need 4 columns
1) Demand due
2) Supply due
3) QOH
4)Difference
I need each branch to have their own sheet, for a total of 4 sheets... Supply and Demand for both plants.
What it boils down to is I need to know what the demand is per week, and the supply I have to meet that demand, broken down like the attached sheet.
Seems my sheet is too large due to the amount of data for the site, but here is the link to the LARGE File...
[URL] .....
View 8 Replies
View Related
Mar 28, 2012
I am trying to create a formula to calculate the total number of calls that I need to receive to hit the target % if the current % is less than the target %. I have tried various formulae, but not having much luck. Also, it shouldn't show me any negative figures.
A = Departments
B = Calls Dropped
C = Calls Received
D = Current % (C/F)
E = Target %
F = Total (B + C)
G = Required (When I enter B, C and E, the rest needs to calculated automatically. G should tell me the amount of calls I need to receive in order to achieve the target specified in E)
Departments
Calls DroppedCalls ReceivedCurrent %Target %TotalCalls Required to hit TargetDept 1
21083.33%95.00%12 Dept 2
067100.00%90.00%67 Total
27791.67%95.00%79
View 7 Replies
View Related
Oct 5, 2013
I need to get right formula for below details:
Promoters
Neutral
Detractor
no.of Surveys
Percentage
Target
Promoter
needed >75%
Smith, John
5
2
1
8
50.0%
75%
???
Formula to get Percentage: =(Promoter-Detractor)/Neutral
Need to know how many numbers of Promoters needed to get 75.00%
View 1 Replies
View Related
Feb 1, 2014
I am currently putting together a Directory and want each of the 19 programs and the worksheets to be maximized when they are opened.
View 1 Replies
View Related
Oct 27, 2008
I have been building a program in Excel and one of my lines of code just stopped working. I am just selecting a different sheet, say I am Sheet1 and I want to jump to Sheet2:
View 3 Replies
View Related
Oct 28, 2012
I have a worksheet change macro that from the insertion of date (dd/mm/hhhh) in a cell, fills some other cells with the day number, the week number, the month,...
Everything works fine when i fill one date after the other. But when I try to fill many cells with the same day by dragging the black cross at the right corner of the cell the macro is not activated. how to activate a worksheet change macro by dragging the black cross as a mean to fill many consecutive cells in a column?
View 6 Replies
View Related
Sep 6, 2007
I'm trying to auto sort a list of ranks that are linked to another sheet. My sort code works when it referers to input number values, but when it refers to cells that have formulas, it does not recognize the value from the formula, only the formula itself. Any ideas would be welcome.
View 4 Replies
View Related
Jun 11, 2014
I was working on a chart to calculate my Amazon seller rating to see how many more perfect order I need to hit my next target grade. Here is how the calculation works.
Order with no problem gets 100 points per order
Minor problem gets 0 point
Moderate problem minus 100 points
Severe problem minus 500 points
Grade are evaluate by:
<84.5 Fair
<96.5 Good
<98.5 Very good
Above is Excellent
Total points / total orders = final grade (or percentage)
As of now i got : 53800 (points) / 624 (orders) = 86.22(%)
Now that I know what grade I've got so far and I also want to know how many more perfect orders I need to achieve my next targets or in case some bad orders come by and how far they pull me down.
Attached is my work sheet so far and I'm just missing the calculation for the orange shaded part.
Amazon seller rating calculator.xlsx‎
View 3 Replies
View Related
Aug 24, 2014
Data is;
83300 - hypothetical number of times I have fired my gun at target.
43209 - hypothetical number of times I have scored bullseye.
So, my bullseye percentage = 43209/83300, or ~51.87%.
Need formula to determine how many more consecutive bullseyes I need to shoot, in order to achieve 70% ratio.
Since each shot from now on will be a bullseye, both values (hits & shots) will increment together.
View 5 Replies
View Related
Jan 7, 2014
I am wanting to have conditional formats so the cell fill in a range on sheet 1 will change to:
- red if the value of a cell on a seperate sheet (date) is greater than 18 months old
- yellow if the value of a cell on a seperate sheet is 'In progress'
- green if the value of a cell on a seperate sheet (date) is less than 18 months old
View 5 Replies
View Related
Aug 10, 2009
As part of a larger macro, the code below is supposed to start the separation of data into 4 columns. It doesn't work perfectly though and I have to manually inspect data and correct. The problem is that 22: 8- 3- 3 becomes 8- 3- 3 in the second column, which is what I want. However 60:12- 7-10 becomes 7/12/2010. Excel appears to recognise it as a date, when the extra number is in the second column.
View 4 Replies
View Related
Feb 28, 2014
I am trying to make a document that counts some results within a range. The criteria of that sum is that it needs to be within a date range. I made a small example in a new document to make things clearer.
Link if it does not work for image: Image - TinyPic - Gratis foto's delen en afbeeldingen & video's hosten
The results between D10 and lower need to be count towards the total on top in one of the cells of January or february (And more in the real document). I need it to automatically stick it in the total of January or February. I need excel to check the Cells in C10 and lower for the date. If the date is in January i want it to automatically write it in total of the corresponding month.
View 1 Replies
View Related
Feb 18, 2013
I have two cells. One of which contains a String and other contains a date value. I need to concatenate both and use it as a key for vlookup function.
Cells(x,y)= "=VLOOKUP($B7&TEXT($F6,"mm/dd/yyyy"),'Copy Data'!H2:J161,2,FALSE)"
OR
Cells(x,y)= "=VLOOKUP(CONCATENATION($B7&TEXT($F6,"mm/dd/yyyy")),'Copy Data'!H2:J161,2,FALSE)"
In my resultant cell formula looks like =VLOOKUP($B7&TEXT($F6,"mm/dd/yyyy"),'Data'!H2:J161,2,FALSE) itself and the expected result is not achieved.
Eg: B7=04152AB F6=21/12/2010 I need to merge both values and use it in vlookup for finding match from another sheet named 'Data'
View 2 Replies
View Related
May 21, 2007
way to get a formula result to freeze or remain unchanged AFTER a certain time?
I tried using a macro which runs when the file is opened and does a crude 'copy/paste values' operation and replaces the Formula results with their values, but its is not very 'nice'!
I need a table to change a pattern of values but not in the past, but still to remember what that value was....!
View 9 Replies
View Related
Dec 13, 2007
I am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim StartDate As Date
Dim EndDate As Date
If IsDate(Me.txtStartDate.Value) Then
StartDate = Me.txtStartDate.Value
Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy")
Else: MsgBox "Please enter a date"
End If.............
View 5 Replies
View Related
Jun 26, 2013
I'm trying to make a summary page that will provide a monthly report based on the data in a second sheet.
I have attached an example with dummy data.
I know this could be easily done with a pivot table but the page format has to remain static and reflect current practises.
At the moment I can only return data from the whole range - not just the desired month.
Fruit Example.xlsx‎
View 2 Replies
View Related
Sep 29, 2006
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
View 9 Replies
View Related
Apr 27, 2007
I use datediff to calculate the difference between 2 dates in Months.
Result = Datediff("M", Date1,Date2)
I need the result to be formatted to 2 decimal places ie 23.52 (months)
Not neccessary to use datediff if this doesnt work.
Please note I have cross posted this HERE because I couldnt get connected to ozgrid for some reason, I will montior both sites for a solution and post back results. Apologies for the inconvenience.
View 5 Replies
View Related
Jun 24, 2008
I'm trying to find a formula that will give me a count of all programs by month that have an evaluation result. So, in column A1:A24 I have a list of programs with. In cell A25, I have the total number of programs. In column B1:B24, only 7 of those programs have evaluation results, some of the rows are blank.
I know that I can get a sum of the programs by month, but how do I only get a count of those with an evaluation result? What formula can be used to get a year to date (a running count), not a count based on 12 months? Meaning that we would need a year to date for each month, so currently for October to June (based on fiscal). If we based it on year to date, then I think we would have to divide be 12 and that would make the results inaccurate.
View 2 Replies
View Related
Feb 29, 2012
I've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
View 6 Replies
View Related
