As part of a larger macro, the code below is supposed to start the separation of data into 4 columns. It doesn't work perfectly though and I have to manually inspect data and correct. The problem is that 22: 8- 3- 3 becomes 8- 3- 3 in the second column, which is what I want. However 60:12- 7-10 becomes 7/12/2010. Excel appears to recognise it as a date, when the extra number is in the second column.
View 4 RepliesI have an excel file with some data in it. I have two columns with one of four words in it. For simplicity I'll call them RED, GREEN, BLUE, and Yellow. A few columns over I have columns "Same" "Good" and "Bad". I'm trying to figure out a way to get excel to put a 1 in the appropriate column, if cell A1 is Red I need excel to look at the word in cell B2 and put a 1 in the "same" column if A1 and B1 are the same word. If the word in B2 is Yellow I need excel to put a 1 in the "Good" column. If the word in B1 is GREEN or BLUE I need it to put a 1 in the bad column. The tricky part is each of the four words RED, GREEN, BLUE, and Yellow have a different set of words that will be called "good" or "bad". So if the word in cell A1 if Green for example it will have a different set of good and bad color words.
So it seems I need four different functions depending on what word is in A1. In the column next to these lists of words I have the date which I'll need to use to give me the sums of same, good, and bad for each day. But first things first. I think I need to use a combination of IF functions and MATCH function, but I can't figure out anything that works. Below is what I'm hoping it will look like when I've got the right formulas.
First column
Second column
Date
Same
Good
Bad
[Code]....
Col C = Text and Col F = dates
I would like to count the # of times a value occurs in Col C based on a date
range in Col F.
I have 2 columns: Locations (Column A) & Dates (Column B).
I want to find the most recent date for a selected Location (stored in $G$1).
currently I have in C2: =If($A2=$G$1,$B2,"") copied down the column to the end of data (currently C153). Then in C1: =Max(C$2:C$153).
I also have in D2: =If($C2<$C$1,$C2,"") copied down to D153, and in D1: =Max(D$2:D$153) to find the 2nd most recent date.
Is there some way to condense this into just 2 cells?
See attached file for example (note the columns are currently sorted by date, but that is not always the case).
I have the following code that fills a range of cells (starting at the active cell) with the date a user selects from a calendar control.
Private Sub Calendar1_Click()
ActiveCell.Value = Calendar1.Value
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)....................
I’m trying to resolve this issue and would appreciate some help.
Scenario
I have a tracking sheet that tracks development of work to be completed by individuals.
I have a due date column that shows when the work should be completed.
Once the work has been completed, the user enters his completion date.
I have a formula that provides an overdue warning (Completion date – today’s date) and some conditional formatting.
Problem
When I copy the formula through all the cells in the column I get a number (example 39504) and this changes everyday.
How can I eliminate this being shown as it throws out my average development day calculation?
I'm trying to create a SUMIF-style formula which is able to test for more than one condition. i.e if the values in column C meet a certain criteria and if the values in column E satisfy another criteria then add all the corresponding values in column D. In my particular spreadsheet, column C contains a date value. So, for all the dates in column C which are later than 01/01/2008 and for all the cells in column E which contain the word "oustanding", I need to add up all the corresponding values in column D.
View 3 Replies View RelatedI've been searching the forums and web trying to figure out how to extract a text value from a 3D array result, to no avail or well beyond my understanding.
I've attached a file which shows an abbreviated version of the search (from the original 49 col x 400 row, which shows the name to date array which can return a sum.
What I'm looking to do is identify within this array result if there has been a text entry, and return the text as opposed to a sum of the remaining values. This is essentially a double check to make certain that there aren't hours scheduled when other events such as vac/loa/etc are also booked.
I have column A set up to display dates in the following format: 03/04/2009. While the "look" is fine for the values in the column, I cannot get it to stay in that format when it is moved to a text file. It simply converts the display back to 39876.
I would like a macro that 1) looks at all values in column A and 2) converts each cell in the column to text format but leaves the contents so they are dates 03/04/2009 (mm,dd,yyyy).
I need to custom sort a column. I have 3 different types of data in the column. First - multiple dates, Second - "TBA", and Third - "ASAP". What I need is when the column is sorted the "ASAP" rows will be first, the dates (sorted) will be next and finally the "TBA"s. I have been trying to use a custom list.
View 2 Replies View RelatedI have a worksheet with a range of dates in column E. What I would like is a formula that states If any of those dates is less than or equal to 10 (days) from today and column H text is not "Yes" then show text "Email outstanding Actions" else show nothing?
View 4 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.
View 2 Replies View RelatedI have a userform where the user will identify a record to delete. I need to search another worksheet (Month) for the event's name which is associated a date. Once it finds this event's name I need to clear the contents of that cell.
Here is the code I am using for the record deletion from the 'Data" worksheet. I need to also locate and clear the cell as stated above.
I am trying to make a macro that will query a column J4 for a date, if the date is found say "Wednesday, July 4, 2012" (J8) get the text from Column K8 "Independence Day" and insert the text in Cell (H1).
The Macro Prints sign in sheets with the date in H2, it only prints Monday through friday. Then skips the weekend and the next date will start the following Monday.
The Federal Holiday schedule is in column range J (Date) and K (Holiday)
This is where I am stuck ....
EmployeeTimeSheet_2012.xlsm
I am trying to figure out a way to condense my code (improve my code) Right now I am using a Macro in Excel to go through a workbook by selecting each column individually and if there is something in the header then formatting that column as text. The problem with the way I am currently doing it, is that due to size limitations on the VBA code, I can only select columns A to Z, and if there is more data in the worksheet it is not formatted. Also I would like the code to check the header and if the word date is in there, format it as a date instead. Also if there is a way to delete any invalid ranges in the workbook
Sub Format()
Dim VarFileName As String
Dim VarPath As String
Dim VarSavein As String
Dim wsheet As Worksheet
VarSavein = Sheets("sheet1").Range("C2").Value
VarFileName = Sheets("sheet1").Range("A2").Value
VarPath = Sheets("sheet1").Range("B2").Value
Workbooks.Open VarPath & VarFileName
For Each wsheet In ActiveWorkbook.Worksheets
Sheets(wsheet.Name).Select
Columns("A:A").Select
Selection.TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, _
Semicolon:=False, Comma:=False, Space:=False, Other:=False, FieldInfo _
:= Array(1, 2), TrailingMinusNumbers:=True..........................................
I am trying to make a document that counts some results within a range. The criteria of that sum is that it needs to be within a date range. I made a small example in a new document to make things clearer.
Link if it does not work for image: Image - TinyPic - Gratis foto's delen en afbeeldingen & video's hosten
The results between D10 and lower need to be count towards the total on top in one of the cells of January or february (And more in the real document). I need it to automatically stick it in the total of January or February. I need excel to check the Cells in C10 and lower for the date. If the date is in January i want it to automatically write it in total of the corresponding month.
I have two cells. One of which contains a String and other contains a date value. I need to concatenate both and use it as a key for vlookup function.
Cells(x,y)= "=VLOOKUP($B7&TEXT($F6,"mm/dd/yyyy"),'Copy Data'!H2:J161,2,FALSE)"
OR
Cells(x,y)= "=VLOOKUP(CONCATENATION($B7&TEXT($F6,"mm/dd/yyyy")),'Copy Data'!H2:J161,2,FALSE)"
In my resultant cell formula looks like =VLOOKUP($B7&TEXT($F6,"mm/dd/yyyy"),'Data'!H2:J161,2,FALSE) itself and the expected result is not achieved.
Eg: B7=04152AB F6=21/12/2010 I need to merge both values and use it in vlookup for finding match from another sheet named 'Data'
I want to activate a specific cell on a specific day...namely today.
I have a excel spreadsheet with various dates that when it reaches today i want another cell to activate and be shifted to the active cell.
I have the following columns:
Date of transaction Earned Points this transactionActive PointsActive date of pending points Pending Points
07 November 2012 R 40.00 08 December 2012 R 40.00
Now, i want the pending points to activate and be shifted to active points on 08 december 2012. my active date of pending points columns is automatically calculated from 07 november 2012 by formula =C3+31
way to get a formula result to freeze or remain unchanged AFTER a certain time?
I tried using a macro which runs when the file is opened and does a crude 'copy/paste values' operation and replaces the Formula results with their values, but its is not very 'nice'!
I need a table to change a pattern of values but not in the past, but still to remember what that value was....!
I am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim StartDate As Date
Dim EndDate As Date
If IsDate(Me.txtStartDate.Value) Then
StartDate = Me.txtStartDate.Value
Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy")
Else: MsgBox "Please enter a date"
End If.............
I have two cells (c1 and c2).
c1 contains (2+3*4)*3 without "=" at start.
c2 must contain the result of c1 it means 42.
In the attached file I have a few variants I tried to solve it but they both don't fit.
Formula.xls
I have the formula in O62 cell :
[Code]....
In formula bar when I sellect complete formula and press F9 key, I can see:
[Code] .........
results.
How can I write this visible result to "O62" cell or, " another cell example"P62" as a text value.(without to copy & paste).
I want to make this with a formula ( if impossible by macro).
see the sheet attached. To put into context, I am a teacher and want students to work on tasks, and have the answers to those tasks available to them but hidden, until a give them a password that unhides it.
On the attached document, Lesson1! K35:Q41 i have some answers to the task beside it in B35:H40. I want to hide these answers in some way (without affecting the columns as there is data above) and then when I want students to see the answer I give it to them and they enter it into L43 in this example. At this point the answers are revealed and stay revealed for revision purposes.
This will be repeated using different passwords for different tasks throughout the workbook e.g. L52 will be a different password revealing the answer in K48.
I have two cells (c1 and c2). c1 contains (2+3*4)*3 without "=" at start. c2 must contain the result of c1 it means 42. I think it has a very simple sulution but I don't know it. In the attached file I have a few variants I tried to solve it but they both don't fit.
View 3 Replies View RelatedI'm trying to make a summary page that will provide a monthly report based on the data in a second sheet.
I have attached an example with dummy data.
I know this could be easily done with a pivot table but the page format has to remain static and reflect current practises.
At the moment I can only return data from the whole range - not just the desired month.
Fruit Example.xlsx‎
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
I use datediff to calculate the difference between 2 dates in Months.
Result = Datediff("M", Date1,Date2)
I need the result to be formatted to 2 decimal places ie 23.52 (months)
Not neccessary to use datediff if this doesnt work.
Please note I have cross posted this HERE because I couldnt get connected to ozgrid for some reason, I will montior both sites for a solution and post back results. Apologies for the inconvenience.
I'm trying to find a formula that will give me a count of all programs by month that have an evaluation result. So, in column A1:A24 I have a list of programs with. In cell A25, I have the total number of programs. In column B1:B24, only 7 of those programs have evaluation results, some of the rows are blank.
I know that I can get a sum of the programs by month, but how do I only get a count of those with an evaluation result? What formula can be used to get a year to date (a running count), not a count based on 12 months? Meaning that we would need a year to date for each month, so currently for October to June (based on fiscal). If we based it on year to date, then I think we would have to divide be 12 and that would make the results inaccurate.
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies View Related