I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I have one column which contains suppose first names & i have other two column which contains first name & last name in same sheet but like they may be having in g & h column.
so i want to exact last name of user form that column(g & h) to my first name column(a).
Basically, I need to look for an item, lets use "apple" as an example, in a range of cells, A1:D100. Then the corresponding result would be in another column in the same row.
Sheet2: col A = contains the style# col B = contains the color of the style col C = contains the size of the style col D = contains the qty of the style,color, size
Sheet1:
I would like to do the following:
A1 = input the style # B1 = input the color of that style C1 = input the size of that style
then D1 should automatically contain the qty of the mentioned style, color, and size.
I would like to put a formula (or make a macro) for Cell F7 (and all the other cells too) in sheet "Budget Sheet" that pulls the value $100 from cell G5 from sheet "Input Sheet" by looking through columns A-F for the account ID "5111100"
Obstacles:
- I (for the most part) cannot change the format of "Budget Sheet" or "Input Sheet"
- I cannot have the formula (or macro) just look down Column F because the actual file I am working with has the pertinent account IDs scattered through columns D-F (it was exported from another program).
Notes: - I am using Excel 2003 SP3 - If necessary, I can make the reference to "5111100 · Bonus" if that would make things simpler
- Column G will always contain the dollar amount I need.
-I've been hitting the books trying to figure out how to get array formula working on this and cannot for the life of me get it to obey when I press ctrl-shift-enter.
Can you display items from 1 column on a worksheet in 2 columns on a Listbox?
This is to avoid having a Listbox that is too long for the form, (I know I can use a scrollbar and I am but I would still like it shorter if possible).
I was wondering why a pivot table will allow you to tick and untick pivot items that are not visible?
My pivot tables have a lot of data and someone may wish to only see the pivot items that are shown in the pivot table in its currrent view. Is there a way in VB to achieve this?
In my attached example when you suntick the Media 'TV' then look in the 'Channels' drop down you can still see the tick boxes for TV channels 'ITV' and 'TV_BBC1' (I know why they are still ticked, I'd just like them not to be visible).
I've got results in row 3 - 16 386 and sometimes these results are exactly the same in some rows. What I now would need is row AB to display only one of each result and row AH to display how many percentages of the time this particular result appears.
I have a count for each site for certain cloumn headers. But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.
eg: a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites) sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2) A2: ????
I suppose I'm looking for something like this: A2: ==A1 But, of course, that doesn't work.
If I do this it gets close: A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB: 'SEARCH CODE Dim myItem As String, myRNG As Range, NewLoc As String Dim Found As Range [code].....
I am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.
Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open() Dim Mycell Dim Rng Set Rng = Sheets("Sheet1").Range("B1:B25") For Each Mycell In Rng If Mycell.Value < Date Then MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue" End If Next Mycell End Sub
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
I have a pivot table with multiple row fields and multiple column fields. One of the column fields is a Date and I need some VBA that will auto-sort the columns into ascending order by the Date column field.
E.g., if the first four column labels are "2-Jun-2010, 13-May-2009, 16-May-2013, 17-May-2012" then i want the sort to arrange them as "13-May-2009, 2-Jun-2010, 17-May-2012, 16-May-2013".
Note: This is the left to right order of the columns i'm talking about, not the top to bottom order of the rows, or the data in the rows but specifically the column labels.
I've tried googling a solution and I can find a variety of code that deals with sorting the data in the rows in all sorts of ways, but nothing on how to order the columns.
i'm using excel 07, and the source data for the pivot table has the Date field formatted as custom "dd-mmm-yyyy". This can be changed if necessary.
I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
Excel 2003. I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.
(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro Can it be password protected somehow?
I entered a simple formula in a cell =B14*B16 but it won't calculate. The cell only displays the formula and not the result. tell me what I did wrong. I've attached a sample.
I am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean) Dim StartDate As Date Dim EndDate As Date If IsDate(Me.txtStartDate.Value) Then StartDate = Me.txtStartDate.Value Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy") Else: MsgBox "Please enter a date" End If.............
I want to make a formula based on 2 times ex: 10:07:00 and 10:09:00. This formula should display "intime" if the diference between both is under 20 minutes, "outime" if the diference is above 20 minutes and it should display "error" if the time is under 0 minutes (this will only happen when someone makes a mistake typing in the time. For example 10:37:00 and 10:36:00)
It's a time sheet that I need to have whatever data is listed in column E to be listed starting in cell C27 but only once even if it's listed several times. In cell D27 I need the sums to match the data to it's left with the values from above in column D. I've used fill colors to help show my intent. I would also like it to keep track of remaining vacation time by recognizing the word 'VAC' from column E and subtract the value from it's left. This value is shown in cell J26 as '46hrs REMAINING'.
I have two columns of B2 and C2 data in the same worksheet and want to identify duplicates in the columns and return a value of true or false in column D. The formula I have been utilizing is:
I have a macro-routine that generates a table of all sheet-headers (+/- 100-120 sheets) in a workbook. It's crusial that all headers - row("1:1") - have the same values in respektiv columns -so I have this routine to check that this really is the case, before new prosess. The table is rather huge - so I should som way or another identify the columns with more than one value (f.ex back-ground-color in column-top-cell). In this case I must edit and correct the header, and run my routine once again - until all headers are the same
Table is plased in Sheetc("HeaderCheck")
My routine works, but I dont know how to fix this mark-up stuff.
